Table of Contents
Art Clay Silver is a precious metal clay made in Japan. It is easy for everyone from children to the elderly people to make a beautiful silver jewellery work . The process is so simple, it can be molded like a water-based clay. Just after 5 minutes firing, the clay become 99.9% silver.
How do you use silver art clay?
SO, HOW DOES SILVER CLAY WORK? Step 1- Roll out the clay. Keep the clay 1mm thick by rolling it out in between spacers or playing cards. Step 2 – Create the shape. Shape and refine your design, using a cookie cutter. Step 2 – Create the shape. Step 3 – Fire and polish. Step 3 – Fire and polish.
Is silver clay pure silver?
Silver metal clay. Fine silver metal clay results in objects containing 99.9% pure silver, which is suitable for enameling. Because the clay is a sterling silver alloy, one of its best attributes is its post firing strength, in comparison to fine silver.
What is silver clay made from?
Silver clay is a material used for making jewellery and decorative objects. It is made from silver that is recycled from a range of sources, including waste from x-rays and the photographic industry. The silver particles are mixed with an organic binder and a bit of water and the clay comes pre-packaged ready to use.
What is the difference between art clay silver and PMC?
Yes, all three versions yield the same metal, 100% silver. The difference is not in the ingredients but in the shape of the particles. Original PMC is made with flake‑like particles that allow room for the binder, which gives the material its workability. PMC+ is made with a particle with more neatly defined edges.
Does silver clay need a kiln?
You will need a kiln with a thermostat so that the temperature can be held at the right level for the time required. The Prometheus Pro-1 kiln is large enough to fire ten Art Clay Silver jewellery pieces at a time.
What do you need for silver clay?
Here’s what you’ll need: Art clay silver. A silver clay kiln or hand torch. Sanding pads. Metal Clay Balm. Metal clay workmat. Needle tool. Metal clay roller. Soldering block.
What is the best silver clay?
Sterling silver clay is the strongest silver clay on the market because of the additional copper content.
Can you fire silver clay in the oven?
Precious Metal Clay or Art Clay can be fired in any furnace that will sustain the required temperature with reasonable stability. Almost any kiln with a pyrometer, like those used for burnout or enameling, will work.
Which metal clay is best?
Bronze Clay Bronze is an alloy of copper and tin. Bronze is a very hard metal and is the strongest of all the metal clays available. We offer many types of Bronze Clay.
Is silver clay strong?
A common misconception about silver metal clay is that after firing it’s solid metal, just like a casting, but it’s not. Castings are made by pouring molten metal into a mold and allowing the metal to cool in the mold. The result is a very strong, solid metal object with very little porosity (more air spaces).
Can you torch silver clay?
Torch firing is a great, inexpensive, way to fire your metal clay. You can use a small butane gas torch, like a kitchen torch, to fire all the Art Clay Silver clays.
Do you need a kiln for metal clay?
Metal Clay Firing Kits Fine silver clays can be fired with a small butane torch, an enameling kiln, a tabletop jewelry kiln, or a gas burner. Other metal clay types, such as bronze and silver alloy clays, require a carbon firing. Copper clay is the exception. Copper clay can be torch or kiln fired.
Can you mix PMC3 with PMC Flex?
PMC3 can be used for mixed media jewellery; it can be combined with dichroic glass, synthetic gemstones, some natural gemstones and ceramics. You can also combine PMC3 with PMC Flex. PMC3 can be torch, as well as, kiln fired.
How do you burn silver clay?
Light your butane hand torch and set to a blue flame. Hold the torch about 2cm away from your design, moving the flame in a circular motion around the piece. Gradually move the flame closer to the PMC as you make that circular motion. As you heat the PMC you’ll notice that it will start to smoke and then catch fire.
Can you do silver clay at home?
Silver clay is a lovely new material which is fully mouldable, just like clay. You can shape it free-hand, or use moulds and tools to texture and shape it, and then fire it into fine silver (99.9% pure silver). Firing is by specialist kiln or there are alternative firing techniques you can do yourself at home.
How do you keep silver clay from sticking?
If you are rolling out your clay, do so on a non stick surface. You can cover it with some baking paper or put it inside a report cover (plastic) before you start rolling. This will stop it from sticking to the roller, and will also help to keep it pliable.
Can you make rings from silver clay?
Cut the clay. Once you’ve added texture to your silver clay ring, you can cut it accurately to size. Use a metal clay cutting blade to cut along the measurement you made earlier. Advanced metal clay ring design: Add another element to your PMC ring with small clay cutters….
Is gold clay real gold?
Art Clay water-based gold clay, sometimes called metal clay or precious metal clay, is made by Aida Chemical Industries in Japan: it’s a composite clay-like material, made of 95% 22K gold and 5% water-based binder. This gold can be hallmarked as 22 karat gold, once fired it is 91.7% gold and 8.3% silver.
What is Silver clay jewelry?
Silver Clay, Art Clay Silver, Precious Metal Clay, PMC – whatever name you call it, this magical product is revolutionizing the world of jewelry making. Basically, microscopic particles of pure silver (or gold) are embedded into an organic binder. Both of them are manufactured in Japan and both are excellent products.
What is PMC Metal Clay?
What is precious metal clay? For those not familiar with PMC or Precious Metal Clay, it is a clay based craft material made from tiny metal particles, an organic binding agent and water, which can be modelled and shaped just like normal clay. Once dried and fired it becomes a solid piece of sintered metal.
