Table of Contents
ARM-STAY: Use this mode for securing your house while you are home. ARM-STAY will provide you with an Exit Delay and an Entry Delay and is designed to ignore motion sensors, and other specific sensors not set for Stay mode. During the Exit Delay, the beep will get faster during the last 10 seconds of arming.
What does Armed stay mean ADT?
“Armed Stay” will arm all of your sensors except for the motion sensors. This is the arming mode you should use when remaining inside your home to avoid setting off the alarm with one of your motion sensors.
How does ARM stay work ADT?
STAY is used to arm the system with people or pets inside the premises. The perimeter sensors will be armed, however interior sensors will be left unarmed. AWAY is used when no one will remain inside the premises. The entire system (interior and perimeter) will be armed and interior movement will trigger an alarm.
What’s the difference between armed stay and Armed away ADT?
Armed Stay is designed for when you plan on arming the system and staying in the home. Armed Away is for when you plan on arming the system and leaving the home. Again, an even wittier name. Arming in the Away Mode will not automatically bypass any sensors, and the entire system, including motion sensors will be armed.
What is the difference between armed stay and armed night?
Arm Night is exactly the same as Arm Stay. The only difference is that any Interior Zones with the Arm Night setting enabled will not be bypassed when the system is set to Arm Night mode. Please note that you will only see the Arm Night option if you have at least one sensor with the Arm Night option enabled.
How do I know if my ADT system is armed?
When you arm your system using the Away arming method, both interior zones (e.g., motion detectors) and border zones (e.g., door and window contacts) will be active and will cause an alarm to sound when opened. 1. Check that your system is ready to be armed (Ready light is ON).
What happens when ADT alarm goes off?
The short answer is that when the ADT alarm goes off, the ADT monitoring station immediately contacts the home or business owner at 1-2 phone numbers and then notifies the authorities if they don’t get an answer with the correct password on the account.
Why does Armed Stay say exit now?
When arming in stay mode, the alarm system should still provide an exit delay, or say “exit now.” This is to provide someone the opportunity to leave the property while arming the system for the remaining individuals. Jul 25, 2012.
What do cops do when home alarm goes off?
If an alarm goes off and no one can verify why, the data tells us it’s likely a false alarm and police treat it as such. It’s a non-verified crime. That means a slow response if at all. However, if the security company can verify the a crime is in progress, then police will respond accordingly.
Does ADT alert the police?
ADT will call the police if there is an emergency that activates the alarm. ADT will attempt to call the homeowners first. If the homeowners cannot be reached, a phone call will be made to the local police dispatch. If you plan on using ADT as a home monitoring service, this is useful information to have.
What does ready to arm mean?
What does Ready to Arm mean? On the home screen or the on-screen keypad (or the control panel itself), READY indicates that all of the security system’s sensors are in a normal condition or have been Bypassed. No protected doors or windows are open* and no alarms are in progress.
What does ARM panel mean?
Arm Custom means that you have armed your security system, but one or more zones have been bypassed. The bypassed zones are inactive and unable to cause an alarm on the system. Whenever you arm your system with bypassed zones, it is referred to as an Armed Custom state.
Does disarmed mean the alarm is off?
Disarmed: When Disarmed, no sensors in your home will be monitored and no alerts will be sent to the monitoring station although the system will still be powered on and functioning. Use Disarm when you’re at home and want the freedom to go in and out of your house easily.
How do I set my ADT alarm to stay no delay?
STAY NO DELAY Mode: Most DSC Panels: press STAY “one touch quick button” until it beeps then press *9 for the NO Delay feature. On some security keypads, like Honeywell, this is called Instant Mode arming.
How do I arm my ADT alarm at night?
To set this alarm at night: Shut and lock all of the doors in your home. Close and lock all windows. Go to your ADT alarm. Key in your security code. Press “Instant” (which also doubles as the number “7” key.) Wait for the alarm to beep three times and the “Armed” LED light to turn red.
What does 12 mean on ADT alarm?
–12– ENTRY/EXIT DELAYS. General Information Your system has preset time delays, known as exit delay and entry delay. When you arm your system, exit delay gives you time to leave through the entry/exit door without setting off an alarm.
What do I do with my old ADT system?
Move into a House with Existing/Wired Security Systems/Kits, Keep or Upgrade Use existing home security/alarm system or unmonitored home security system; Upgrade the system to one that can be monitored via phone apps or self-monitored; Abandon the existing system and replace it with a brand new system;.
What does alarm system stay Mean?
Stay Mode. Many people think you have to fully disarm your security system when you’re in the house, but Stay mode ensures you never have to sacrifice peace of mind. When set to Stay, your security system simply deactivates motion detectors, leaving the rest of your sensors active and primed for alert.
