Table of Contents
Olson Face Mask is a fabric mask designed to be an alternative mask should the standard equipment not be available. This design incorporates three pieces and is designed so that a filter can be added to the mask “pocket”.
What is an Olson style mask?
Olson-style masks are the kind that have a rounded, almost cone-like shape. They’re also a popular style for homemade COVID face coverings. A double-layer cotton mask in this style works better than a single-layer cotton mask, but it allows for the expulsion of more droplets than a double-layer pleated cotton mask.
Why is it called Olson mask?
A new modular mask, The Olson, named after 1930’s legendary maker nurse Lyla Mae Olson, was quickly developed by clinicians from UnityPoint Health -Cedar Rapids in March 2020. The pattern has been shared across the globe in the fight against COVID-19.
Does the Olson mask have a pocket?
Step 1: Select and Cut Your Fabric The pattern only has two pieces, the main mask, and the pocket pattern (optional). For the pocket you will want 1 matched pair of your inside or a contrast fabric. If you are using an old super soft t-shirt, that usually goes on the inside parts.
Is Pellon good for face masks?
Yes, Pellon non-woven interfacing is suitable for use in face masks.
Which Pellon interfacing is best for face masks?
Currently, “non-woven” interfacing is being recommended by some as an option for filter material, specifically Pellon interfacing 380, 808, 810, 830, 880F, 910, 911FF, 930, 931TD, 950F, and Oly-Fun by Fairfield.
How do you wear an Olson mask?
Use one of the slits between the mouth and the cheek to turn the mask ride-side out. Add 23” of ¼” Elastic (Preferred – as shown in picture) or hair tie to each side by folding the fabric on the end of the mask over the tie and sew down.
Does fusible interfacing work as a filter for face masks?
Overall, technically you can use fusible interfacing in face masks. It will provide some filtration (to block out particles) and it’s breathable.
Is felt good for face mask filter?
Felt also performed better than surgical mask material. Felt is washable with similar filtration efficiency and airflow resistance before and after washing, suggesting reusability. On the other end of the performance spectrum, nonelastic 100% cotton fabrics (often used for homemade masks) performed the worst.
What is a 3D face mask?
The 2D style is a clam shaped mask that is folded in half. ( Horizontal) While the 3D style is a mask that has two flaps that fold out to cover the nose and chin.
Is Pellon a polypropylene?
Pellon® 915 Cambric is a lightweight 100% Polypropylene cloth. It is great for use under upholstered furniture to conceal webbing and springs, for protection against dust on the underside of furniture, for use under lamp bases to prevent surface scratching, and to help finish pieces like a professional.
What is Pellon fabric made of?
High-quality Polyester Material – The Pellon PLF36 Fusible Interfacing is made from high-quality 100% Polyester that works for any light and medium-weight fabrics.
What fabric can be used as a filter?
Materials such as natural silk, a chiffon weave (we tested a 90% polyester–10% Spandex fabric), and flannel (we tested a 65% cotton–35% polyester blend) can likely provide good electrostatic filtering of particles.
Is Pellon 915 washable?
Cambric NWPP (e.g., Pellon 915) This material is significantly lighter weight than the Smart-Fab Double-Thick and has a lighter/softer hand. Washing: Directions from the supplier say cambric should be spot cleaned. However, feedback from sewists suggests that it can be washed and reused.
Is fusible interfacing safe to breathe through?
Fusible interfacing contains a heat-activated adhesive, which can interfere with breathability. Our primary concern, however, is toxicity. Until a thorough investigation of heat-activated adhesives is conducted, we cannot recommend any fusible interfacing.
Is polypropylene the same as interfacing?
Interfacing is normally used to stabilize fabrics when cutting and sewing. “Non-woven” interfacing is usually polypropylene.
What is Pellon used for?
Pellon® PLF36 Fusible Interfacing is an ultra lightweight interfacing for light to medium-weight fabrics. It is great for wovens, knits, blouses, and sheer garments. It is excellent for use with crepe de chine, voile, and handkerchief linen fabrics. It can also be used for stabilization of quilting projects.
Should you wash fusible interfacing before sewing?
However, some fusible interfacings are labeled as “no pre-washing required”, like the Pellon PLF36. Pellon says generally their interfacings don’t need to be pre-shrunk, except “a few interfacings”. They also say “nonwoven interfacings do not need to be pre-shrunk. Woven and weft-inserted products do.”Jul 1, 2020.
Is interfacing safe for face masks?
Yes. You need that non-penetrating layer. Woven interfacing is just like adding another layer of cotton. You want a solid sheet of protection.
Is cotton quilting fabric good for face masks?
Well-fitted homemade masks with multiple layers of quilting fabric and off-the-shelf, cone-style masks reduced respiratory droplets the best, the researchers wrote.
What size should a child’s mask be?
Here are the measurements for a child’s face mask based on two different age groups, and the printable patterns for both can be found here. Ages 2-6: 8″ x 6″ fabric, with 5″ elastics. Ages 7-14: 8.5″ x 6.5″ fabric, with 5.5″ elastics.
What do you need to make a face mask with fabric?
Supplies 2 pieces of tightly woven cotton fabric (examples: clean pillow cases or 100% cotton t-shirts). Cut to 9” X 6” (Adult) or 7 ½” X 5” (Child). Sewing (straight) pins. Scissors.
What is the best wire to use for face masks?
We have used one piece of 16-gauge copper wire. Wrapping together two pieces of 20-gauge copper wire also works, as does 18-gauge galvanized steel wire. For 20-gauge wire, cut one 10 to 12-inch piece and fold it in half, then loop the remaining ends. A 5-inch piece of wire works equally well in both mask designs.
