Table of Contents
An apron, as it applies to furniture, is a wooden panel that connects the surface and legs of a table, desk, or sideboard that sits on legs. Some wooden side chairs could have aprons, although most chair legs are attached to the seat.
What is a table top apron?
An apron, also called the “skirt” or “skirting”, is simply the portion of the table or chair that is vertically positioned beneath the table top or seat. This hides any corner blocks, bracing, self-storing, or other mechanical pieces (on tables) from plain view.
What is apron height on a table?
Entry Tables Apron height of 2″-3″ is typical.
What is an apron table leaf?
Also known as a skirt or skirting, the apron is the framing under your table top. In self-storing leaf tables, the apron also disguises the engineering required to house the leaves.
What are the parts of a table called?
Parts of a Table top – the flat surface of a table. apron, skirt or frieze – the under-framing which connects the legs to the top. leg – the main vertical piece which supports the top and raises it off the floor. knee – the upper portion of the leg. foot – the bottom part of the leg which touches the floor.
How wide are table aprons?
Dining table legs are 29″, which leaves about an inch for top thickness. If you’re planning on a top thicker than one inch, you can shorten the 29″ legs to maintain a finished height of 30″. The apron boards that connect the table legs to form the base are generally about ¾” thick and 4″ wide.
What do you call the edge of a table?
One of those details that’s not often discussed are table edges, also called table profiles. Jul 11, 2019.
How deep should an apron be?
My old rule of thumb with typical dining or writing table dimensions was to put the bottom of the apron a minimum of 24 inches off the floor. If your top is, say, 1-1/4 in. thick, you could have a 5″ apron and still have 24″ to the floor for knees.
What is a skirt on a table?
Table Skirt. Table skirts are one piece of pleated fabric that is attached to the outside edge of a table either with a table clip or staples. They don’t cover the top of a table so another piece of fabric or vinyl is recommended.
How much overhang should a dining table have?
Table top overhangs of 2 to 4 inches are quite standard, and give a proportional look to the table. However, some people prefer the look of a shorter overhang. There is no right or wrong in most cases–just make sure you are comfortable with the overhang amount that you choose.
Does a trestle table need an apron?
First, a trestle table does not require an apron which leaves much more leg room . Our trestles are set in 12” from the ends of the table as well which allow for easy seating at the ends. More Spacious. Regardless of the size of your table, a table with a trestle base will sit one more person along the sides.
How do you attach table legs to aprons?
You attach one to each of the four corners of your tabletop using screws, and in the center of the block is a screw hole. The legs that came with the kit have a bolt installed part of the way into the leg, and the exposed portion of the bolt is then screwed into the mounting block.
Why do tables have skirts?
As the name suggests, a party table skirt is a fabric that covers the sides of the table and hangs down from the edge of the table to the floor giving a beautiful look to event tables. It also helps hide any unsightly flaws and imperfections to impart a refined and sophisticated flair.
What are apron gaps?
Gap covers are small pieces of wood that cover the space in the aprons where the two halves of the table meet.
What do you call a table with leaves?
A drop-leaf table is a table that has a fixed section in the center and a hinged section (leaf) on either side that can be folded down (dropped). The usual purpose of a drop-leaf table is to save space when the table is not in use.
What are the two principal part of table?
i) Table Number: A table must be numbered. Different tables must have different numbers, e.g., 1,2,3.., etc. These number must be in the same order as the tables. (ii) Title: A table must have a title.
What are the three parts of a table?
It consists of columns and rows. In relational databases, and flat file databases, a table is a set of data elements (values) using a model of vertical columns (identifiable by name) and horizontal rows, the cell being the unit where a row and column intersect.
What is table explain various parts of table?
A statistical table has at least four major parts and some other minor parts. (1) The Title. (2) The Box Head (column captions) (3) The Stub (row captions) (4) The Body.
How much should a farmhouse table overhang?
Here’s the hard math: With a farmhouse table the top overhangs approx. 2″ on each end, the apron is approx. 1.5″ thick on each end, and each leg is approx. 3.5″ thick.
