Table of Contents
What are skirted tubs. A Skirted tub is a style of tub that is finished on one side with a skirt or apron that is either flat or bowed. This skirt covers the entire length of the bathtub itself with the intent of making it much easier to install and provides an area to rest on.
What is the difference between a bathtub and an alcove bathtub?
The term alcove doesn’t refer to the shape or size of the bathtub, but the installation. Alcove tubs are unfinished on three sides with the fourth side, usually one of the long sides, finished with a tub apron. The tub gets installed into an alcove section of the bathroom with three of its sides enclosed by a wall.
How do you install a tub apron?
Install the apron by sliding the upper edge of the apron under the edge of the bathtub and centre the apron between the two walls. Maintain the apron in position and insert the plastic thumb screws through the holes under the lower edge of the apron and in the hardware (Fig. 7.1). Do not over-tighten.
What does a skirted bathtub mean?
Skirted. A Skirted tub has one finished side and is placed between two walls and attached on the back side.
What does alcove bath tub mean?
Alcove Bathtubs. Alcove tubs, which are surrounded by walls on three sides. The front side is then covered with an integral tub apron. Right and left-handed drains are available and are selected depending on your bathroom configuration.
Can you put a drop in tub in an alcove?
Yes, drop in tubs can be installed in an alcove, but they’re more commonly installed in more open spaces, freestanding or jutting out from a wall. Depending on the size of the bathroom, a drop in tub installed in an alcove may provide less space; one may be able to fit a larger tub into another space in the room.
Are alcove tubs good?
Whether you have a large or a small bathroom, the alcove bathtub will be good for you. Unlike other bathtubs out there, the best alcove bathtubs are stylishly designed to take very little space and to give you an excellent bathing experience.
Can you tile alcove tub?
The aprons that are cast into alcove bathtubs simplify the tub installation, but they often come up a bit short in the style department. One way to improve the appearance of a plain apron and create the look of a built-in tub is simply to build and tile a short wall in front of the tub.
Do you tile over tub lip?
The best approach when installing cement board or other tile backer around a tub is to keep the cement board out of the lip area. Apply it to the wall with the bottom edge about 1/4 in. above the lip of the tub. Then apply a generous amount of thin-set to the bottom bathtub tile and position it 1/8 in.
Why are drop-in tubs more expensive?
Drop-In: A drop-in tub can be more cost-efficient because of install and materials, these tubs are often acrylic and not cast iron. Because it sits atop the horizontal deck, it comes with a lip that sits atop the horizontal surface to prevent water from overflowing – though some people don’t like this look.
What is the difference between a drop-in and alcove bathtub?
Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.
What is a tub skirt deck?
Skirted tubs, also called alcove tubs, are installed against three walls and are finished on the exposed side. Called a skirt, the finished surface typically fits the entire length of the tub and is installed on the side from the top edge to the floor to finish it, hiding the plumbing and subfloor beneath.
What is the difference between an alcove and a skirted bathtub?
An alcove tub and a skirted drop-in tub are very similar, with the only difference being their installation. An alcove tub is made to fit into a space joined by three walls, whereas a skirted tub will always have one completely open side.
What is a 3 wall alcove tub?
3-wall alcove tub-shower combinations are the most common tub type and are designed to maximize space. The unfinished ends usually get sandwiched between an exterior wall and a handy built-in storage cabinet. They’re fitted inside a framed enclosure that’s finished to match bathroom cabinets or tile.
How are alcove tubs measured?
Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top.
What is a soaking tub?
A soaking tub is a freestanding bathtub that is typically oval in shape with enough water depth to allow for total submersion. As a result, these bathtubs provide a more therapeutic and almost medicinal soak, relaxing your muscles quite similar to a hot tub or jacuzzi as the entire body is fully submerged.
What is the deepest alcove tub available?
On the other hand, alcove soaking tubs can vary on their depth and size, but will generally have a depth of 19-20 inches with 14 or more inches of soaking depth.
What is a slide in tub?
A slide-in tub is a bathtub with a a chair-height surface inside to sit on and a door in the sidewall that permits a bather to enter through the side of the tub.
