Table of Contents
What is Trisodium Phosphate? An inorganic chemical compound (Na₃PO₄), TSP is a white granular or crystalline substance that can be mixed with water to create an alkaline solution. Once diluted, TSP is a highly effective cleanser, degreaser, and stain remover.
What can I use instead of TSP cleaner?
If you are looking for a more natural trisodium phosphate substitute, borax can be a fine replacement. It doesn’t require all the safety measures of TSP and is inexpensive, easy to use and it won’t hurt the environment. Borax can kill fungus and strip away dirt and grease on porous surfaces such as wood and cement.
What is TSP cleaner made of?
Trisodium phosphate, commonly called TSP, is a packaged, blended cleaning product consisting of 75 to 80 percent trisodium phosphate and 20 to 25 percent sodium carbonate.
Is trisodium phosphate the same as baking soda?
The main ingredient in TSP is phosphate, but this product contains no phosphate. It has sodium sesquicarbonate, similar to baking soda, as the main ingredient (sodium sesquicarbonate makes up about 20% of actual TSP). Simple Green is an environmentally safe alternative for TSP that is also not an irritant.
What do you use TSP for?
What Is TSP? Trisodium phosphate, or TSP, is a powder you mix with warm water and use to wipe down your walls before painting. It is essential to paint preparation, acting in three ways to improve your paint’s adhesiveness.
Can I use Dawn instead of TSP?
Mix a cleaning solution in a bucket. About 1/2 cup of dishwashing detergent to one gallon of warm water makes an effective cleaner to remove grease, tobacco smoke and grime. Borax or ammonia with warm water will also work.
Is borax as good as TSP?
Like TSP, borax successfully cleans a variety of surfaces as well as removes mold and mildew. Choosing to use borax instead of TSP will allow you to clean the surface and kill fungus without the use of chemicals that can cause skin irritation.
Is Krud Kutter the same as TSP?
DESCRIPTION AND USES . Krud Kutter® Pre-Paint Cleaner TSP Substitute cleans and de-glosses surfaces prior to painting. It is a ready-to-use, spray on-wipe off formula that cleans and de-glosses surface so paint adheres better.
Can you mix TSP and bleach?
Though it shouldn’t be used to clean grout, TSP can be used to remove it; TSP is an active ingredient in grout removal products. TSP can safely be mixed with bleach to remove mold and mildew (see below for measurement guidelines).
Does Walmart sell TSP?
Lundmark TSP Hard Surface Cleaner – Walmart.com.
Can you mix trisodium phosphate with vinegar?
Start by mixing one teaspoon of any one or more of the following into one quart warm or hot water in a spray bottle or bucket: TSP (use for heavy duty cleaning), liquid soap or borax. Add a squeeze of lemon juice of splash of vinegar to cut grease.
Is TSP cleaner the same as sugar soap?
North America. The comparable cleaning product in Canada and the USA is trisodium phosphate, also known as “TSP”. “Sugar Soap” in the USA is generally a cosmetic product.
Is Simple Green a TSP cleaner?
Simple green It is a free TSP phosphate liquid cleaner that can clean every material and dirty surfaces. The versatility of Simple Green makes this product a fantastic TSP cleaning agent because it is not toxic and contains a biodegradable formula that can adequately clean all washable surfaces.
Can I use TSP on tile and grout?
For tile and grout cleaning, start with T.S.P. (trisodium phosphate) mixed in a very strong solution with warm water. Have rinse water available in case you get any T.S.P. on yourself. Apply the mixture over the area using a long-handled tool like a sponge mop, or a brush with a long handle.
Can you use TSP on stainless steel?
Trisodium phosphate (TSP), however, can effectively clean soda kegs, especially when used the keg is soaked in it, because it will not harm the stainless steel or rubber components. Plastic abrasives and some elbow grease also work well.
Does TSP neutralize muriatic acid?
Prepare a mild acid and water solution. Add acid at a ratio of no more than 1 part muriatic acid to 4 parts of water. Neutralize the acid on the pool shell, by again scrubbing the entire surface with a mixture of TSP and water, as previously described. Rinse the surface one final time with fresh water.
What is the best wall cleaner?
Wash walls with oil-based paint using warm water and dish soap. Skip the white vinegar for walls with oil-based paint. The acid in vinegar can dull and damage oil-based finishes. Use dish soap, baking soda, and warm water, but keep your sponge a little damp while you’re scrubbing the dirt away.
Can I use Dawn to wash walls before painting?
Most wall surfaces that appear to be in good condition don’t need very much in the way of cleaning. Then mix up a bucket of cleaning solution comprised of one to two cups white vinegar and a half-tablespoon of a good grease-cutting dish soap like Dawn®. Use at least two gallons of water.
What should I clean my cabinets with before painting?
You can use liquid dish soap such as Dawn, Simple Green, M1 liquid deglosser, TSP, or you can use a product called Krud Kutter. A green Scotch-Brite pad works great to scrub all surfaces. You need to pay close attention and make sure you remove any grease and grime before painting your kitchen cabinets.
Can I use borax to wash my walls?
Cleaning with Borax You can make an effective wall cleaner by mixing a cup of borax powder with 2 tablespoons of dish detergent in a gallon of warm water. You can either wet a rag and use it to wipe down the walls with the cleaning solution or you can put the solution in a spray bottle and wet the walls before wiping.
How do you paint furniture before TSP?
I use a few teaspoons of TSP in a spray bottle mixed with water, and a clean lint free t-shirt rag (that I throw away after), to thoroughly wipe down all the surfaces, inside and out. You’d be surprised how much dust accumulates inside a dresser.
How do you get mold off walls with borax?
Mix 1 cup of borax with 1 gallon of water then sprinkle the solution on the moldy surface. Scrub off the mold using a cleaning pad. Allow the borax solution to sit for 2 hours before rinsing with distilled water to remove all the mold.
