Table of Contents
What is the difference between a scrub plane and a jack plane?
The lucky thing is that smoothing planes are small and easier to true than any other bench plane. A scrub plane (foreground) is a smoothing plane with the heart of a roughing plane. A panel plane is just a jack plane with the guts of a smoother.
What is the purpose of a scrub plane?
A scrub plane is designed to quickly remove large quantities of wood. Based on the Stanley 40 1/2, the open throat and curved blade allow you to take deep cuts with ease. Our Scrub Plane can quickly thickness rough sawn boards or cut stock to width before following with a Jack or Smoothing Plane.
What number is a scrub plane?
Scrub planes are listed as the No. 40 (pictured), which is 241mm ( 9½”) long and 31.75mm (1¼ “) wide, and the No. 40½, which is a bit bigger at 267mm (10½”) long and 38mm (1½) inches wide.
What plane is usually set up as a scrub or fore plane?
jack plane A Garrett Wade Paragon #5 jack plane Other names Jackplane #5 plane Classification Hand plane Used with Scrub plane Fore plane Jointer plane Smoothing plane.
What is the first hand plane I should buy?
Most people opt for a number 4 size plane (pictured above). If your hands are a bit smaller, then a number 3 works great (pictured below). If you prefer a heavier smoothing plane to give more power to your planing, then a number 4-1/2 size smoothing plane is ideal (pictured below).
How long should a scrub plane be?
Rough stock was prepared first with a “fore plane,” which is a metal or wooden plane that’s anywhere from 16″ to 20″ long and has an iron that has a significant curve to its cutting edge.
Why is it called a jack plane?
How did the Jack Plane get its name? Its name is related to the saying “jack of all trades”, as jack planes can be made to perform some of the work of smoothing, fore and jointer planes, especially on smaller pieces of work.
What is the difference between a jack plane and a smoothing plane?
Jack planes have toothed edges (or irons) that often teeth into the wood, whereas smoothing planes feature an iron with no sharp edges. This means that you can make smoother surfaces without leaving ugly tracks in your workpiece.
What is the difference between a smoothing plane and a jointer plane?
Smoothing planes have a sole that ranges from 5″ to 10″ long. The primary job of jointer planes is to straighten the wood, a task it excels at by virtue of its long sole (the longer the sole, the straighter the resulting work). The jointer plane is used after the fore plane but before the smoothing plane.
Is a router plane useful?
A router plane is also helpful for working into the ends of stopped dados and grooves. The router plane excels at sizing rabbets, lap joints, and tenon cheeks. Again, the beauty of the router plane is its ability create a smooth, flat surface parallel to the surrounding or adjacent surface, and at a consistent depth.
What is a scrub person?
Scrub has been slang for an “insignificant or contemptible person” since the 1500s. Over the centuries, the term was used as a slur to denigrate prostitutes and even Black people for a time.
Does Stanley still make planes?
Actual Bailey pattern Stanley bench planes are still available from Stanley. They are made in Mexico and have plastic handles.
Who makes the best smoothing plane?
Comparison Chart IMAGE PRODUCT PRICE OUR TOP PICK Shop Fox D2673 2-Inch by 9-3/4-Inch Smoothing Plane CHECK PRICE ON AMAZON RUNNER UP Micro-Mark 10 Inch Smoothing Plane CHECK PRICE ON AMAZON ALSO GREAT STANLEY Hand Planer, No.4, Adjustable CHECK PRICE ON AMAZON TRUPER 5L Smooth Bench Planes 2″ (51mm) CHECK PRICE ON AMAZON.
What is a woodworking plane?
A hand plane is a tool for shaping wood using muscle power to force the cutting blade over the wood surface. Generally, all planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber.
What is a No 4 plane?
A No. 4 is a handy size and weight for finishing and final smoothing as well a general-purpose plane. The cap iron and other quality fittings on the planes are solid brass, an ideal material for these moving parts. The sole is 245mm(9-1/2″) long with a 50mm(2″) wide blade. The sole of the plane is flat and accurate.
What is the most useful hand plane?
The Best Hand Planes of 2022 Veritas #4 1/2 Smoothing Plane. Best Overall. WoodRiver #4 Bench Plane. Best Edge Relief Planer. YOGEON Woodworking Hand Planer, 4″ Best for Tight Spots. Stanley 3-1/2″ Small Trimming Plane. Best for Rough Lumber. Best Smoothing Plane. Best Overall. Best Edge Relief Planer.
What is a Stanley No 5 plane used for?
The Stanley Model 12-905 Bailey Jack Plane is designed for rapid stock removal when preparing timber before finishing.
What wood plane should I buy first?
The low-angle block (left) and shoulder (right) planes make great first planes for the power-tool woodworker, cleaning up marks that motorized tools leave behind. If you want to replace some powered machining operations with hand-plane work, test the waters with a No.
How long should a jointer plane be?
Jointer planes are typically 20 to 24 inches (510 to 610 mm) long, and are the longest hand planes commonly used. Under the Stanley Bailey numbering system #7 and #8 planes are jointer planes.