Table of Contents
A roof rake is an excellent way to clear excess snow from the top of your home. Comprised of an extending handle and a blade, these simple tools allow you to remove snow from your roof while keeping both feet on the ground. Slicer-blade roof rakes are designed to be pushed upward, rather than pulled down.
What is the rake part of a roof?
Instead, the rake refers to the sloped sides of a gable style roof. This type of roof is one of the most common in colder or temperate climates, and consists of two roof sections sloping in opposite directions from the peak to allow for the best flow of precipitation off the roof.
What is a roof rake used for?
The rake of a roof, as explained above, is the exposed portion on the sides of a gable roof that extends from the eave to the ridge of the sloped sides. It covers the top edge of a roof, while a roof rake is used for removing snow from the roof of a house.
Are roof rakes a good idea?
If your roof is flat or has a low slope, roof raking is definitely a must once the snow gets to be about 6 inches or more. If your roof has a higher pitch, it’s still something to consider, especially if the snow is wet and heavy and it is building up.
What is the difference between the roof eaves and the rake?
Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Rake—The slanting edge of a gable roof at the end wall of the house. Ridge—The horizontal line at the top edge of two sloping roof planes.
What is rake flashing?
Gibraltar’s Gable Rake Flashing is a professional trim product designed to cover the exposed ends of metal roofing panels. Gable Rake Flashing is applied over metal panels along the rake edge to direct rain water away from the fascia.
When should you rake your roof?
After A Heavy Snowfall As a rule of thumb, you should clear your roof after 6 inches of snowfall. The reason? Fresh snow – snow that has just fallen – is the easiest snow to remove from your roof.
Does roof rake damage shingles?
Use a snow rake for pitched roofs (available at most hardware stores) to remove snow from your roof. Start from the edge and work your way into the roof. Try to shave the snow down to a 2 or 3 inches on the roof instead of scraping the roof clean, which will risk damage to your shingles or other roof covering.
Does roof raking prevent ice dams?
Using a long-handled roof rake to removing the snow from at least at lower 4 feet of roof edge can help prevent ice dams from forming. This is the only safe way to remove snow from a roof; never get onto a roof to remove snow in the winter.
What are the different types of roof rakes?
Roof rake blades come in two styles: a scoop (shaped like a traditional snow shovel) or a slicer (which functions a bit like a cheese slicer). Scoop blades are designed to be placed at the top of the roof and dragged towards the ground. This allows gravity to help clear the snow, but it also has two downsides.
How do I keep my gutters from getting damaged from snow?
5 Tips for Winterizing Your Gutters Clean your gutters. When leaves, twigs, or other debris clog gutters during winter, rainwater and melting snow can overflow and freeze on the ground. Trim your trees. Try a test run. Install gutter heat tape. Use de-icing compounds.
Do I need to shovel snow off my roof?
— You may be tempted to climb up on your roof and shovel off all that snow that’s been building up this winter. But don’t. It’s dangerous, and you may cause more damage than the snow will. Clearing snow like this from roofs may actually cause more damage to the roof than the snow will.
What is the difference between gable and rake?
Gable: The A-shaped side wall of the home that forms the peak of the roof is called the Gable. The home above has two gables, one on each end of the home. Rake: The rake of the roof is the part that ends over a gable end.
What is a rake overhang?
The American Wood Council’s 2012 Wood Frame Construction Manual defines rake overhang as “The horizontal projection of the roof measured from the outside face of the gable endwall to the outside edge of the roof.” Section 2.1. 3.4.
What are the rake rafters supported by?
what is a gable/rake lookout? framing member fastened to a common rafter and cantilevered outward over the gable rafter to support the rake rafter. where are the gable studs? vertical studs extending from the cap plate on the wall to the underside of the gable rafter.
Where is the eave on a roof?
An eave is the edge of the roof that overhangs the exterior siding. Parts of an eave include the soffit, which is the underside of your roof’s eaves, and the fascia, the vertical facing board.
How do you measure a roof rake?
Place the end of the level against the bottom edge of a roof rafter and hold it perfectly level. Measure from the 12-inch mark on the level vertically to the bottom edge of the rafter. That measurement is the number of inches that the roof rises in 12 inches. Locate a rake board that is readily accessible to you.
What are the sides of a roof called?
Eave: A roof edge that extends past the exterior wall line at the bottom of a slope. Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards.
