Table of Contents
Monroe ® Quick-Strut ® assemblies feature rods engineered to bend up to 15mm with no fractures or cracking to help maintain vehicle control in a major road impact. They feature coil springs that meet or exceed OE standards for spring performance.
What does quick strut mean?
A loaded strut (also known as a quick strut) comes as an assembly with everything pre-installed, including the coil spring, mount, etc. An unloaded strut does not come as an assembly—all you get is the strut itself.
How much does a quick strut cost?
When it comes to struts, they are a fair bit more expensive. To replace a pair of struts, the total cost on average is between $400 and $1000, including wheel alignment. An individual strut assembly costs approximately $150 to $350, while the labor cost is $100 to $300 for a pair.
Are quick struts safe?
Although quick struts are endlessly easier and safer, they are not likely to provide the smooth ride quality you want. When Scotty installed them on his wife’s Lexus, for example, the quick struts felt dreadful.
What does strut assembly include?
A strut assembly consists of two primary elements: the coil spring, which supports the height, weight and stability of the vehicle; and the shock absorber, which swallows bumps and dampens vibrations caused by irregularities on the roadway.
How long do quick struts last?
On average, if your car has been “babied,” you can expect your shocks/struts to last about 10 years.
Can you replace just the shock in a strut?
Do you have to replace both shock absorbers or struts if only one is bad? It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. This is because a new shock absorber will absorb road bumps better than the old one.
Is an alignment necessary after replacing struts?
Strut suspension usually has the shock absorber and the spring in one unit, with the top of the strut mounted very high in the car body and the bottom of the strut attached to the lower control arm. This lowers the vehicle center of gravity, which is a good thing. Replacing those struts requires no alignment.
Do car’s have both shocks and struts?
First of all, it is important to note that not all vehicles have both shocks and struts. Shocks are part of the overall suspension, and a strut is a complete suspension assembly. The shocks and/or struts in your car perform two functions. They dampen spring oscillation, and secondly, they aid in ride control.
What happens if you don’t replace struts?
Safety: Worn struts result in longer stopping times and/or distances as the vehicle weight can shift (sometimes unexpectedly) during braking. Wear on other parts: Driving with bad struts accelerates the wear on tires, as well as other components of the suspension system, such as the springs.
Which is better shocks or struts?
Shocks and struts are both parts of your vehicle’s suspension system. They usually consist of a spring and a shock absorber. Struts are designed to be much stronger than shocks since they are weight-bearing components. Additionally, they help dampen vehicle jolts and improve your vehicle’s steering and alignment.
Should I replace the whole strut assembly or just the strut?
The cost of a loaded strut assembly is higher than the cost of just the strut. However, most shops recommend replacing the strut mount when replacing just the strut. With a complete strut assembly, you restore factory ride height and feel and get a quieter ride due to the new strut mount and spring isolator.
What happens if struts are leaking?
Shock and struts help keep the car stead. When your struts are leaking this will cause the car’s stability to be off kilter due to the lack of hydraulic fluid that absorbs bumps and turns which can cause the vehicle to roll or be thrown off the road.
Is a strut and a shock the same thing?
However, shocks and struts are two distinct parts with different functions. While both can help with your vehicle’s ride and handling, these parts work in different ways. Shocks are individual components of the suspension system while struts are a major structural component of the chassis and suspension system.
How do I tell if my struts are bad?
The Warning Signs Of Worn Shocks And Struts Instability at highway speeds. Vehicle “tips” to one side in turns. The front end dives more than expected during hard braking. Rear-end squat during acceleration. Tires bouncing excessively. Unusual tire wear. Leaking fluid on the exterior of shocks or struts.
What else can replace shocks?
Getting Your Shocks & Struts Replaced Shocks and struts should always be replaced in pairs (front axle or rear axle), and it’s even better to replace the shocks/struts on all four wheels at one time. This helps maintain reliable handling and a consistent response on both sides of the vehicle.
How much will new struts settle?
New distance between top of front tires and wheel well is 3.5″, top of rear tires and wheel well is 4.5″. I asked my mechanic, who indicated that the struts will ‘settle in and lower’ in a few days of driving.
