QA

What Is A Pot Filler In The Kitchen

When renovating or upgrading your kitchen, one option you will come across is a pot filler faucet. Also known as a kettle faucet or pasta arm, this single-temperature faucet (usually cold water) is designed so you can fill pots of water directly on the stove rather than in the sink.

What is the point of a pot filler?

What is a pot filler used for? A: Pot fillers are installed behind the range to more easily fill pots with water for cooking. They also fill faster than your typical sink faucet to make it quicker to fill a pot.

What is wall pot filler?

Wall-mounted pot fillers are the ultimate in kitchen convenience. Generally mounted above the stove, they allow you to fill pots as they sit on the burner rather than having to fill the pot at the sink and then carry it (full and splashing) to the stove.

What is a pot filler in a house?

A pot filler is a faucet located on the backsplash over your range or cooktop. Pot Filler Faucets have an articulated arm that enables the tap swing out over the burners so you can fill large stock pots where they will be heated.

What is a pot filler called?

A pot filler faucet, also known as a pasta arm or kettle faucet, is a separate kitchen faucet style installed near a stovetop or range. The kettle faucet mounted over a stove swings out, extending on a long, jointed arm.

Should a pot filler have hot or cold water?

A plumber can install a pot filler in a matter of hours. All that’s required is a cold water supply pipe that rises inside the wall behind the stove and stubs out at the proper height.

Should pot filler be hot or cold?

Pot Fillers You can run either a hot water line or a cold one, they don’t have a mixer and therefore can only dispense the water they are hooked to. They can be installed on the wall or on your countertop.

Why do pot fillers have 2 handles?

Jointed arm pivots out to easily reach each burner and tucks back against the wall when not in use. Two-handle on/off operation is double protection from leakage, especially important when mounted over the stovetop.

Does pot filler have to match faucet?

(like, a very modern faucet shouldn’t be matched with a traditional pot filler.. they both should match your kitchen.) You should be able to find a pot filler to match your faucet, even if it’s a different brand.

How far above the stove should a pot filler be?

In general, the faucet needs to be placed anywhere from 16 to 36 inches above the surface of the range top or stove. The large amount of range in this number is based primarily on personal preference. Try grabbing the biggest stockpot used on the stove and add at least three or four inches to its height.

Can you have a pot filler under a microwave?

The problem with over-the-range microwave is that they become sponges for grease. If you want a specialty feature, like a pot filler, you probably won’t have room between your stovetop and hanging microwave. If you have children, it may be difficult for them to access the microwave that high up.

What do I need to know about pot fillers?

A pot filler eliminates the need of carrying heavy pots of water back and forth since you can fill it with water right on your stove top. During the movement from the sink to the stove, some water may slosh around and splash onto your countertops, cabinets, and floors.

What plumbing is needed for a pot filler?

What Plumbing Is Needed for a Pot Filler? A pot filler is just a faucet that’s located above your stove instead of over a sink. It needs to be connected to a water supply line similar to other kitchen faucets. Because the pot filler empties into a pot instead of a sink, you don’t need any drains for it.

Why do American kitchens have a tap over the stove top?

Distinctive Features: A pot filler faucet is a swing-out faucet on a long, jointed arm, mounted over the stove. Pros: Saves you from lugging a heavy pot of water from the sink to the stove; great for filling pots that don’t fit into the sink; faucet arm often folds back against the stove wall when it’s not in use.

Where should a pot filler be placed?

The pot filler should be placed to the right or left of the cooking surface to avoid reaching over the cooking surface to access. The pot filler can be placed above the cooking surface. However, it can get hot from the surface burners or a large pot.

Why are pot fillers only cold water?

The reason you use cold water is when you are cooking, you never pull the water from the hot water heater to cook with. Then there are those that will argue that the water in the pipe has been sitting there. I usually use the pot filler for filling containers daily to water the plants out on my deck.

Why are some pot fillers so expensive?

Pot filler installation costs depend on a variety of factors, including the type of fixture, the location of existing pipes and whether the wall has to be opened to accommodate new water lines and shutoff valves.

What is a pasta arm?

Also known as a kettle faucet or pasta arm, this single-temperature faucet (usually cold water) is designed so you can fill pots of water directly on the stove rather than in the sink.