Table of Contents
A plunge-cut track saw combines the maneuverability of a circular saw with the precision and stability of a table saw, allowing you to make clean, super-straight cuts on a single pass.
What does plunge cut mean?
What Does a Plunge Saw Allow You to Do? While a circular saw will typically need to start it’s cut from the end of the material, a plunge cut saw will let you start the cut anywhere in the material. This makes it the best tool to use when cutting out worktop for sinks or hobs.
What is one example of a plunge cut?
Make Plunge Cuts Safely Plunge cutting is a useful method for starting a cut when you can’t start from an edge. One example is cutting a window opening in a sheet of plywood. But if done with poor technique, this cut is dangerous.
What is another name for a plunge cut?
Plunge saws vs. For this reason, plunge saws are sometimes called track saws. However, any type of hand-held circular saw with attachments for guide rails can be categorized as a track saw, and this feature can thus also be found on some regular circular saws without the plunge-cut feature.
What is a plunge cut with oscillating tool?
The Plunge Cut is the most difficult of saw cuts with any tool. The Oscillating tool can cut quick clean holes in many materials, and finish off plunge cuts started by other tools in tougher materials.
What are the advantages of a plunge saw?
Plunge Saw The blade can be plunged at any point into the material you are cutting. An enclosed blade is safer and significantly improves dust extraction efficiency. The saw has a smooth and flat side that can be used as a guide against a wall or the floor.
Can you use a plunge saw without the track?
Yes, you can, but they’re not as easy to use without a track. The pressure it takes to hold the saw in the plunged position can affect accuracy.
What is a chainsaw plunge cut?
To fell trees accurately and safely, you need to know how to do a bore cut, sometimes known as a plunge cut. When you make a bore cut, a strap of wood at the back of the tree holds it safely and securely, allowing you all the time you need to make the hinge exactly the way you want it.
Where does a plunge cut start?
Plunge cutting involves beginning a cut in the middle of a workpiece without drilling a pilot hole first. Plunge cuts should only be made in soft materials such as wood and plasterboard. When working with a metal, a starter hole is always required.
What is the opposite of plunged?
Opposite of to jump or dive quickly and energetically. climb. rise. float. ascend.
What is the kerf?
Kerf is defined as the width of material that is removed by a cutting process. The “cut angle” on the edge of the part makes measuring the kerf width sorta tricky, but for consistency, the word “kerf” should only be used when talking about the actual cut width.
What are plunge blades used for?
Plunge Cut Blades They have the ability to cut deeper into the material than segmented blades do. These blades are perfect for creating cutouts in drywall, laminate, skirting boards and more as well as simply making rough cuts in wood.
What router bits can plunge?
All spiral router bits are able to plunge cut. Straight router bits with cutting edges that extend half to all of the way across the base of the bit, will allow it to plunge cut.
How do Multitools work?
The accessory is fitted to the tool by a mechanism which allows that accessory to be rapidly rotated back and forth (oscillated). This creates friction with the sanding attachments, or rapid cutting motions with the saw and grinding attachments.
Which is the best plunge saw?
The Best Plunge Cut Saw of 2021 Bosch GKT 55 GCE – BEST CHOICE PLUNGE CUT SAW 2021. Festool TS 55 EBQ. Makita SP6000. 4.0. Metabo KSE55 Vario Plus. 3.0.
Are table saws becoming obsolete?
Is Your Table Saw Obsolete? Nope. If you get a track saw, your table saw may get some long vacations, but it won’t go into retirement. Cutting small parts with a track saw is clumsy, and cutting much deeper than 2 in. is impossible with most models.
Can any circular saw be used as a track saw?
A circular saw can be used for all the same functions as a track saw, but doesn’t necessarily do them quite as well. If you’re on a budget, you can turn your circular saw into a makeshift track saw with straight edge guide. You can make your own circular saw jig, or buy one instead.
What’s the difference between a track saw and a circular saw?
The critical difference is that a circular saw has a long and rectangular rail in the front, unlike its counterpart. A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none.
Is a plunge cut safe?
Pushing the saw to hard can bind the chain and stop the motor, if you are unlucky enough it can be wedged into the log and very hard to get back out. a twisting of the saw or the log can break the chain or the bar, neither are safe problems.
Can you cut with the tip of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
What’s the point of a sliding miter saw?
The most common reason a sliding miter saw is used than that of its non-sliding counterpart, is because of this sliding versatility, as it allows you to work with larger boards, and can assist in projects that are just too difficult to pull off with a non-sliding miter saw.
Why does my Mitre saw splinter wood?
When a miter saw blade plunges down through the wood, any gap between the wood and the throatplate underneath will leave the weak surface fibers unsupported. That’s a recipe for splintering on the bottom face.
Why is a blade brake important?
This solitary feature has saved many a blade, wood floor, cord, or even a finger or toe! It’s easy for a scrap of wood or some obstruction to prevent the blade guard from falling back in place after a cut. Without an electric brake, a blade can continue spinning for 10 seconds or more on some saws.
