Table of Contents
The Pinlock system works on the same principle as double-lens ski or snowboard goggles. A Pinlock insert creates a sealed chamber of air between itself and the inside of your shield. The use of physics means that your visor should stay mostly fog-free assuming that the seal between shield and Pinlock are airtight.
Can Pinlock be removed?
Now that the Pinlock is fitted, give it a check to make sure it has not raised up at all. You can then remove the blue film by peeling it away from the Pinlock and visor. A quick way to check that the Pinlock has been fitted correctly is to do the ‘Breath Test’.
What is Pinlock for on Shoei helmet?
The Pinlock visor insert is made out of a material that contains moisture absorbing properties, which reacts like a sponge and absorbs moisture effectively. The pocket of air that is trapped in between the visors acts as an insulator for the inside temperatures in the motorcycle helmet.
How long does Pinlock last?
This temporary lock usually lasts for 24 hours. For instance, if your ATM PIN was blocked at 12PM today, you should be able to make transactions from 12PM tomorrow.
Can you use Pinlock at night?
The clear Pinlock lenses are absolutely suitable to use at night, it is the other way around for the Dark Smoke lenses.
Why does my Pinlock steam up?
If your Pinlock® lens is not in optimal contact with the inside of the visor, moisture can build up between the Pinlock® lens and the visor. To tighten your Pinlock® lens, you can turn the pins on your visor until the indicator (little arrows) on the pins are pointing more inwards.
What is the meaning of visor?
Definition of visor 1 : the front piece of a helmet especially : a movable upper piece. 2a : a projecting front on a cap or headband for shading the eyes. b : a usually movable flat sunshade attached at the top of an automobile windshield. 3a : a face mask.
What is Arai Pinlock?
Pinlock offers a wide selection of fog resistant insert lenses for Arai helmets. The range of insert lens options includes the Pinlock 70 and 120 performance level lenses , coloured lenses, 100% Max Vision and ProtecTINT.
What is Ruroc Pinlock?
The Pinlock 70 is a premium anti-fog solution for motorcycle riders around the world. The Pinlock 70 insert uses a silicon seal to create a double shield system between the helmet visor and the insert.
How often do you replace Pinlock?
Once dry, the Pinlock will do its job again. This having been said, a Pinlock will eventually pack up and, of course, this depends on the mileage you ride, and the conditions in which you ride. If you ride every day, often in cold and wet conditions, you might need to replace the Pinlock after a year or two.
Is Pinlock universal?
The Pinlock 30 lens is made in a universal size that enables it to be fitted well in all Pinlock® 30 prepared helmet face shields.
Is a Pinlock visor worth it?
It does a very good job of keeping the visor clear of fog, but note you will see some condensation build up (water, not fogging) especially along the lower edge. Not a problem for visibility unless it’s cold enough for it to freeze.
Do you need a Pinlock visor?
Many new helmets come with a Pinlock anti-fog lens in the box these days. The only thing you need to do is install the Pinlock in the visor. The easiest way to do this is by removing the visor from the helmet first. The raised edge will be placed against the inside of the helmet visor.
How do I stop my Pinlock from fogging up?
Place your visor face down on a soft cloth, then gently flex the visor slightly flatter. This will loosen the Pinlock and you should be able to prise it up in the centre and then flex each side out from the pins.
How do you keep your glasses from fogging under your helmet?
Doing these can help tighten the face mask over your nose and cheeks, hence blocking air more effectively. Place Glasses on Top of Your Mask to Create a Perfect Seal. This is another effective way to prevent motorcycle glasses fog up. Use a Mask Extender. Use Soap & Water. Use Anti-Fog Coating.
How do I stop my visor from misting up?
Place your glasses on a warm radiator whilst donning helmet and gloves, then put back on the now warm glasses and shut your visor before returning outside into the cold air. If your now keep the visor shut, your glasses should remain warm enough to avoid any moisture condensing on them.
Can you wash a pinlock insert?
The Pinlock insert lens can get a bit dirty at times, due to fingerprint smudges, dust and moisture retention. Cleaning the Pinlock lens is super easy, all you need is a microfiber cloth and follow the steps below.
What is silicone helmet oil?
Small bottle of silicone lubricant. Used to keep the face of the eye port trim flexible and better able to seal against the shield and allow the shield to open and close more easily while maintaining a good seal.
