Table of Contents
The jointer derives its name from its primary function of producing flat edges on boards prior to joining them edge-to-edge to produce wider boards. The use of this term probably arises from the name of a type of hand plane, the jointer plane, which is also used primarily for this purpose.
Do you really need a jointer?
Simply purchase your lumber already milled in S3S or S4S form (surfaced on three sides or surfaced on 4 sides). If you’re at a point in your woodworking where you’re starting to use rough sawn lumber, say from a lumber mill or your local sawyer, then a jointer is absolutely essential to your shop workflow.
What are the 2 purposes of a jointer?
A jointer is used to make the face of a warped, twisted, or bowed board flat. After your boards are flat, then the jointer can be used to straighten and square edges (guard removed for photo). There’s an infeed table and an outfeed table. The tables are aligned in the same plane.
Can a jointer be used as a planer?
The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first. If you run the other rough face on the jointer, you can certainly make it flat but you won’t make it parallel to the first face.
What is the difference between a jointer and a planner?
A jointer creates a flat surface on wood, and yes, it can be used to correct bow and warp on one side of a board at a time. “A planer is a thicknesser. It takes a thick board and makes it thinner. To use a planer, the board should already have one flat side.
What is a jointer used for in carpentry?
Joiners generally make complete products out of lumber, such as windows, frames or doors for a new building. They also build items like fitted furniture or staircases for a building. Additionally, a joiner might repair or replace worn or damaged elements of a home, such as creating a replica of an antique door.
Is it worth buying a jointer?
Jointers and planers are useful for more than just dimensioning rough lumber. Thick boards can be planed thinner, or made uniform in thickness with others with a planer. Jointers can straighten slightly cupped or warped boards, and they can make rabbets and bevels too.
Can I use a table saw instead of a jointer?
Using Your Table Saw as a Jointer. With the addition of a simple shop-made fence, you can easily edge joint on your table saw. Remember that man-made materials like plywood can be hard on steel jointer knives – but not on carbide table saw blades.
Is a benchtop jointer worth it?
A: Yes, benchtop jointers are excellent tools even for beginners and hobbyists to own. A: The jointer is used to perfectly flatten out the face of a workpiece as well as square the edge.
How large of a jointer do I need?
An 8-inch wide jointer allows me to joint wider boards than a 6-inch jointer, and 8-inch jointers usually come with longer infeed and outfeed beds, adding more support to the lumber. And 8-inch jointers are usually affordable enough for hobbyist woodworking shops.
What are the 6 steps to squaring a board?
Terms in this set (6) rough cut the board to length adding extra (Crosscut on the sliding miter saw adding 1/2″ to 1″ extra) joint the best smooth edge. rip to the correct width (+1/16) bigger. now joint that ripped edge smooth. “skim” cut the best end a cross cut saw.
How long should a jointer plane be?
Jointer planes are typically 20 to 24 inches (510 to 610 mm) long, and are the longest hand planes commonly used. Under the Stanley Bailey numbering system #7 and #8 planes are jointer planes.
Can you plane warped wood?
Mark the shim locations, remove the board and hot glue the shims into place. Then glue the board to the shims and the plywood with a dab of hot glue. Send that rascal through until it’s flat, then pull it free and plane down the other side.
Does DeWalt make a jointer?
Machine overview The DeWalt DW733S is a jointer planer combo (planer thicknesser) made by DeWalt until 1999.
Are planers worth it?
A thickness planer serves three unique purposes that other tools do not: 1) It makes the second face of a board parallel to the other face; 2) It smooths rough stock; and 3) It reduces stock down to the exact thickness you need. If you really want to get into woodworking, a thickness planer is worth the cost.
Which is more skilled carpenter or joiner?
However, when it comes to choosing between the two, it is always worth enquiring about an individual’s expertise, especially when it comes to specialised tasks. A carpenter may skillfully hang and balance a door, but a joiner may produce far better replicas.
Is a joiner more skilled than a carpenter?
The main difference between a joiner and a carpenter A joiner’s work often involves using large machinery such as lathes, sanding wheels, and circular saws. A carpenter will specialise in assembling roof trusses, stud work, and floors; and will be skilled in cutting and fitting timber structures together.
Do joiners still exist?
According to the Bureau of Labor Statistics, there are currently just about a million carpentry positions in the US—about 0.31% of the population. Women make up just 2% of the US carpentry industry—that’s about 20,900 woodworking women.
