Table of Contents
A pony wall (which just might be the cutest design term ever). Also known as half walls, pony walls only come up—you guessed it—halfway or partway to partially divide a space. Pony walls differ from knee walls, which are generally intended to support something such as a countertop, handrail, or rafter.
What is a decorative half wall called?
Also known as a “half wall” or a “knee wall,” the pony wall label emerged more than 150 years ago in Nebraska when a farmer by the name of Walter Clydell decided to build short walls in his horse stable to make it easier to see into the stalls.
What is the difference between a pony wall and a knee wall?
The Difference Between A Knee Wall And A Pony Wall A pony wall is a lot more versatile than a knee wall. It doesn’t necessarily support weight. A knee wall is always a load-bearing wall while a pony wall is not. A pony wall is primarily for decoration and dividing rooms.
What is a pony wall in a house?
A pony wall is nothing more than a short wall, and the term is often used interchangeably with “knee wall” or “cripple wall.” Pony walls, like regular walls, have top and bottom plates, that is, the horizontal members that the vertical studs fasten to. Interior pony walls are drywalled and finished.
What is a short wall in a house called?
From Wikipedia, the free encyclopedia. A pony wall is a short wall. In different circumstances, it may refer to: a half wall that only extends partway from floor to ceiling, without supporting anything. a stem wall, a concrete wall that extends from the foundation slab to the cripple wall or floor joists.
What is the partition wall?
Partitions are non-load bearing walls that separate spaces in buildings. As well as spatial division, they can provide; privacy, acoustic and fire separation and flexibility of layout. Partition walls can be solid, typically constructed from brick or blockwork, or can be a framed construction.
What is a stub wall?
A low wall, monolithically placed with a concrete floor (or other members) so as to provide for the control and attachment of wall forms.
What are dwarf walls?
Definition of dwarf wall : a low toe wall built to retain the slope of an excavation or embankment.
What is a sub wall?
A sub wall is a wall below grade usually on the back of a basement or regular monoslab where the lot drops off in the back or on one side. Sub walls are used to get foundations up to grade with the rest of the house due to sloping lots or sometimes, soft soils.
What is an attic knee wall?
An attic knee wall is a vertical separation between attic space on one side and conditioned space on the other side.
What is a cripple wall?
As shown in the figure, a cripple wall is a short wall that rests on the foundation and supports the floor and exterior walls. If your property is built on cripple walls, one way to increase its stability and reduce earthquake damage is to brace the cripple walls.
What is a knee wall in a shower?
What is a Shower Knee Wall? They extend from the floor to a height of approximately 3 feet (91.44 cm) and are often constructed around or up against a shower stall or bathtub surround. Knee walls are generally an extension of the side of a bathtub or shower and can be tiled over.
What is a knee wall construction?
The knee wall definition is a short wall, usually just shy of 3-feet-tall, that supports the rafters in your attic. They are usually found in older homes where the ceiling on the top floor is an attic. For example, the ceiling is the underside of the roof and slopes down on the sides.
What is a short wall?
/ ˈʃɔrtˌwɔl / PHONETIC RESPELLING. ???? High School Level. adjective Mining. pertaining to a means of extracting coal when the working face is about a third the length of the longwall system and mining is done by a continuous cutter rather than by longwall machinery.
What do you call a low wall?
The low wall is also called a parapet, a half wall, or a knee-wall.
What are the two types of partition walls?
Depending upon the material used partition walls may be divided into the following different types: Brick partitions wall. Clay brick partition wall. Glass partitions wall.
What is partition wall and its types?
A partition wall may be defined as a wall or division made up of bricks, studding, glass or other such material and provided for the purpose of dividing one room or portion of a room from another. Partition walls are designed as non-load bearing walls. It may be of folding, collapsible or fixed type of wall.
What is parapet wall?
parapet, a dwarf wall or heavy railing around the edge of a roof, balcony, terrace, or stairway designed either to prevent those behind it from falling over or to shelter them from attack from the outside.
Why is it called a knee wall?
The term is derived from the association with a human knee, partly bent. Knee walls are common in houses in which the ceiling on the top floor is an attic, i.e. the ceiling is the underside of the roof and slopes down on one or more sides.
Why do they call it a pony wall?
Also known as half walls, pony walls only come up—you guessed it—halfway or partway to partially divide a space. The supposed origins of pony walls confirms the name: It’s said short walls were originally added to stables for ponies.
What is a wall return?
: a wall that makes a decided angle with and is approximately the same height as an outer wall of a building and that is distinguished from a partition or a low wall carrying a partition.
