Table of Contents
A gasser is a type of hot rod originating on the dragstrips of the United States in the late 1950s and continued until the early 1970s. In the days before Pro Stock, the A/Gas cars were the fastest stock-appearing racers around.
What makes a drag car a gasser?
A gasser is a vintage drag car that was popularized in the ’50s and ’60s. Its name comes from the fact that it runs on gasoline instead of race fuel. Nowadays, some people use the term “gasser” to refer to trucks that use gas as opposed to diesel.
What’s the point of a gasser?
The gasser form was dictated by function and most builders looked to eliminate as much weight as possible. Having their exhaust pipes exit through the front fender to shorten the length of exhaust tubing is another common characteristic of gassers.
What are the different gasser classes?
The racing is split into three main gasser classes: A/Gas, B/Gas and C/Gas, along with experimental classes such as D/Gas and H/Gas. The A/Gas cars have a minimum weight of 6 pounds per cubic inch, B/Gas is 8, and C/Gas is 10. Each car is weighed after every official qualifying or eliminations pass.
What is a Willys gasser?
In the 1960s, the wild and colorful Willys gassers were among the most popular cars in drag racing. Originally intended by drag racing’s rules makers as dual-use machines for both street and track, the gassers quickly evolved into radical, all-out race cars with only the thinnest pretensions to road use.
Do gassers have wheelie bars?
Gasser bodies are stripped to reduce weight. Faster Gassers might have some type of wheelie bars, but this ’55, like many, doesn’t. It’s a drag car, so it runs slicks in the back with front skinnies on 3- or 4-inch-wide wheels. Cragars, Americans, Ansens, and Halibrands are all popular wheels.
Why do Gasser cars sit so high?
With form being dictated by function, their appearance is often very top heavy and ungainly, largely due to front ends being raised higher than stock, to assist in the weight transfer during rapid acceleration (racing).
What does AA FA mean in drag racing?
Awful Awful (source) Drag racing slang for a AA/FA (“Double A” Fuel Altered) race car. Blower. Supercharger or turbocharger modifications, sometimes grouped as power adders with nitrous; generates more horsepower by increasing engine atmospheric pressure.
How much does it cost to build a gasser?
Re-engineering a gasser chassis cost money. Tinberg agreed that some customers initially view a gasser build as a cheap way to restore an old car. “It cost more than you think,” he warns. The kit costs around $3,895.
What is a 55 Chevy Gasser?
Glen Fiorello wanted a 1955 Chevrolet drag car, known as a gasser, just like the one he built around 1970 and later sold. The drag cars of the 1960s and 1970s era were typically built by the racers themselves from modified stock cars and readily available parts.
What is a gasser front end?
Originating from a gasoline-fueled drag racing class, the American Gasser is one of the most iconic and popular styles replicated in many of today’s hot rods. Vintage Gasser cars are known for fiberglass front clips, fenderwell headers, and straight axle front ends.
Who made the Manta car?
The Opel Manta is a rear-wheel-drive sports coupé built by German manufacturer Opel in two generations from 1970 to 1988. The Manta was a mildly sporting coupé based on the Ascona family car, akin to the Ford Falcon-based Mustang and its various imitators such as the Ford Capri.
What does SS mean in drag racing?
1/4 MILE INDEXES – Super Stock Eliminator Class 1/4 Mile SS/AH 9.3 SS/A 9.65 SS/B 9.9 SS/C 10.05.
What is gap in racing?
Gap A: drag racing) Beating an opponent in a heads up drag race with a visible distance between the 2 competitors or B: non drag racing) distance in time between two drivers Garagiste.
What does pedaling mean in street racing?
Pedaling: When a driver lifts off the throttle, then gets back on it again, in an attempt to regain traction with the rear tires. Shut down area: The portion of the track after the finish line that drivers use to slow their machines following a run.
Why is solid axle better off road?
“A solid axle setup can improve traction over big bumps and hills as well as gain more torque from the differential as there are fewer parts that power must transfer through,” says aftermarket manufacturer Fab Fours in a comparison between both systems.
What does a solid front axle mean?
A solid axle suspension (also called ‘live axle’ or ‘beam axle’) houses the vehicle’s differential inside the axle itself, connected to the wheels by rigid half-shafts. The entire axle moves as one, so if a left wheel drops into a pothole, the right wheel moves upward in response.
What happened to the 55 Chevy in Two Lane Blacktop?
When production wrapped, VC550041466 was sold to a studio mechanic, while the other two cars were later used in the filming of American Graffiti. Of these, the stunt car was destroyed and later sold for scrap, while the black ’55 survives.
How much is a manta car?
These days, the Manta enjoys a niche following from fans of classic kit cars and enterprising home builders. Really great Mantas can ask nearly $30,000, while fixer uppers may sell for as little as $10,000.
What kind of car is the coyote?
The Coyote X, was built from custom molds based on the McLaren M6GT. The original Coyote X was molded, modified and assembled by Mike Fennel. The car uses a chassis from a Volkswagen Beetle and its engine is from a Porsche 914.
What TV show had a manta car in it?
Hardcastle and McCormick Hardcastle and McCormick Title screen Genre Crime drama Action Created by Stephen J. Cannell Patrick Hasburgh Starring Brian Keith Daniel Hugh Kelly.
