Table of Contents
WHAT IS IT? The Essential Values Countertop Disposal Air Switch works like a button on your sink that is an alternative to a wall switch. It uses the pressure of air to turn on and off your garbage disposal.
How does an air switch work for a garbage disposal?
A garbage disposal air switch is a type of pressure or plunger control knob that activates a garbage disposal by pushing a burst of air through a plastic or vinyl tube to a control unit mounted under a sink. These air switches do not rely upon electricity and thus permit mounting on counter or sink surfaces.
Are garbage disposal Air switches safe?
Safety – First and foremost, air switches are very safe. Even though the control box/air switch is plugged into an electrical outlet under the sink, there’s no electricity at the point of contact with the countertop garbage disposal button. Thus, reducing the risk of electrical shock.
Do I need an air switch?
Why Use an Air Switch The main benefit of using an air switch is that it keeps the user away from the electrical components of the circuit. This is beneficial because it enables them to be used in wet environments without the risk of the user becoming electrocuted.
What is an air switch Insinkerator?
The Air Switch Button and Bellow 6445 is part of the Insinkerator range of accessories. This Air switch is for the Insinkerator 46 (RFISE46) food waste disposal units supplied with polished chrome and white button finish.
Where does the air switch go on a garbage disposal?
The best location for the disposal switch is an airswitch on your counter, next to the faucet. It will not harm or crack your granite to have the air switch there. So many people on this forum have an airswitch in the countertop near the faucet, and not once have we heard of it cracking the granite.
Where do you put an air switch?
We normally place it right next to the faucet itself. This eliminates an electrical switch from being placed on the wall, where it can clutter up the look of your backsplash. And it works great with island sinks.
How do you bypass the air switch on a garbage disposal?
Make sure that the disposal switch is in the “OFF” position. Gently press the red button in to reset garbage disposal. If it does not stay in (retracted), wait ten minutes and try again. Turn on a cold stream of water and turn the disposal switch to “ON” position, the disposal should now run again.
How do you test an air switch?
With air applied to the pressure switch, place one lead of the ohm meter to one of the loose wires, and the second lead to the second loose wire. The air pressure switch should close when air is applied. If the switch closes, the ohm meter will read zero ohms, indicating the air pressure switch is good.
What is an air button?
As you may assume from the name, an Air Switch is a switch which is activated by air. A push button can be used to instigate a “puff” or “sip” of air which travels along a length of PVC tubing and activates the air switch. The air switch will turn a device on or off.
How do I connect an air switch?
How to Install an Air Switch Drill a hole in the counter. Determine the location that is most convenient for the switch. Attach Hose and Slip Air Switch into Counter. Attach the hose to the switch. Twist the Nut onto the Air Switch. Attach the Hose to the Relay and Plug Everything In. Stand Back and Enjoy the View.
Does garbage disposal need a switch?
A garbage disposal typically plugs into a 120-volt GFCI (ground-fault circuit interruptor) outlet under the sink. Note: Batch-feed disposers don’t require a switch because they start when you insert and turn a special drain plug.
What is an air switch Kitchen?
Presair air switches create a safe switching mechanism where water, fire or other hazardous material may be present, such as a kitchen. Commonly used for garbage disposals, the air switch turns equipment on/off with the push of a button or other air bellow.
Do you need an air gap with a garbage disposal?
When there is a garbage disposal installed, the dishwasher drain line should run down from the air gap or high loop and connect to a side nipple on the disposal, where it connects with a hose clamp. Do not bypass the garbage disposal if it is present.
How do you check a garbage disposal switch?
To do this, unplug the garbage disposal and plug something else into the outlet for a test. Try using a night light, lamp, radio or hair dryer. Make sure that the test device is turned on.
Can air switch get wet?
The air activated switch mounts to the sink or countertop; water can get into the power module, posing a fire hazard. Water can get into the power module, posing a fire hazard.
How do I know if my pressure switch is bad?
Some of the tell-tale signs of pressure switch failure include: A pump that cycles continuously for no apparent reason. A pump that works, but has very weak water pressure. A pump that doesn’t turn on and does not provide any water.
What causes a pressure switch to be stuck open?
If your furnace isn’t venting correctly, the pressure switch may be stuck open. This is often caused by a blocked flue pipe, which makes it hard for the system to eliminate combustion gases. The flue pipe can easily get trapped with leaves, feathers, dirt, and other debris.
