Table of Contents
A DECK FASCIA BOARD is the board that runs around the perimeter of the deck for a seamless look. Fascia covers the wood perimeter joist of the deck frame and is sometimes called “rim joist cover.”.
Do I need fascia board on deck?
On a deck, fascia serves a primarily aesthetic purpose. It partially conceals the joists under your deck from view and creates a polished, finished look. It can also add visual contrast if you use a different paint or stain than you applied to the deck itself.
Should deck boards overhang fascia?
When installing decking boards, be sure to allow for enough overhang to cover the fascia board and whatever additional amount you prefer. This means the installed deck boards should have at least 1.75 to 2.75” overhang before the fascia is installed.
What is a fascia board?
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. A damaged fascia can be the starting point for other roof problems and potentially lead to damage to an attic and home.
How far can a deck board overhang?
The American Wood Council states that cantilevers are limited to 1/4 the span of the joists. Joist Spacing (o.c.) Maximum allowable overhang cannot exceed 1/4 of the actual main span.
How far should a deck board overhang?
The decking should overhang the joists between ¼ and 2 inches beyond the end joists and rim board. The amount of overhang you should leave depends on your deck board materials: Most wood decks: ¼” to 1 ¾”.
Should I leave a gap between deck boards?
Proper deck board spacing should have a 1/8-inch gap after the decking has dried out. If you install your decking using wet boards, pressure-treated decking that has not yet dried out, then you should install them with no gap as a gap will be created as they dry and shrink.
Should there be spacing between deck boards?
Proper wood deck board spacing should have at least a 1/8 inch gap after the decking has dried out. If you install your wood or treated deck boards while they are still wet boards, then they should be attached without a gap between them.
Can you use Trex decking as fascia?
Trex offers matching fascia for every decking color in addition to Universal White fascia to complement any project.
What is the use of the fascia board?
A fascia board’s primary function is to protect your home from interior and exterior moisture-related damage by preventing water infiltration. This is why it is critical that the fascia board adequately supports the gutters and keeps them in place.
What is the purpose of fascia?
What is fascia? Fascia is a thin casing of connective tissue that surrounds and holds every organ, blood vessel, bone, nerve fiber and muscle in place. The tissue does more than provide internal structure; fascia has nerves that make it almost as sensitive as skin. When stressed, it tightens up.
How long do fascia boards last?
Well installed and maintained wooden fascia can last for up to 20 or 30 years, before they start deteriorating. Although some might need replacing within 5 to 10 years.
Should you use screws or nails for a deck?
The Consensus: For a deck build it’s best to use a combination of nails and screws. Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.
Should I use deck boards or 2×6?
2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.
Can you put deck boards tight together?
Keep the butt ends as tight as possible when installing wood decking. This rule does NOT apply to composite or PVC boards which can have a large thermal expansion; enough to create a serious roller coaster effect down the length of the PVC or composite boards if you DON’T leave room for thermal expansion.
Do deck boards shrink or expand?
Any type of decking board will expand and shrink, whether it’s wood, plastic, or composites. However, they don’t change in size as much as wood or plastic. Wood fibres hold the shape when the composite undergoes thermal expansion, while the plastic fibres do the same when moisture is involved.
What side do you lay deck boards?
Any decking board manufacturer or professional will tell you: “The proper way to install a decking board is ridge side down.” The ridges are designed to allow for airflow, to stop moisture sitting in the ridge, and allow for a stronger structure.
Why do you stagger deck boards?
Staggering the deck boards decreases the number of screws or nails going into one joist, which can weaken or rot the joist more quickly. Staggering the joints strengthens the deck by spreading the seams across more joists instead of placing the stress on only one.
Do you screw deck boards to every joist?
Each deck board should be fastened with two screws at each point where the board crosses a joist to ensure the stability and durability of your deck’s surface. Boards should be fastened to rim joists with three screws.
