Table of Contents
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. A damaged fascia can be the starting point for other roof problems and potentially lead to damage to an attic and home.
What is the purpose of fascia boards?
As part of the overall roof system, fascia serves the following purposes: It is used to secure the gutters to the roof and keep them in place. Blocks water from penetrating the roof deck and into the attic/home. Increases curb appeal by covering the open/rough ends of the rafters.
What is the difference between fascia and soffit boards?
Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.
Where is fascia on a house?
The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.
Do you need fascia board?
The Best Fascia Tips You Will Read This Year. The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.
What is the best wood to use for fascia board?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
What is the best material for fascia boards?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What is a soffit on the roof of a house?
The soffit is the material beneath the eave that connects the far edge of your roof to the exterior wall of your house. They are often vented. Besides being underneath your eaves, soffits can also be on the underside of a porch roof.
What is house fascia made of?
Fascia is normally made of timber or wood, but can be found in PVC, aluminum, and vinyl as well. It’s typically installed at the same time as your roof or gutters in order to help complete this area of the home. Some homes may not use a fascia board.
What is the board under the fascia board called?
Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.
How much does it cost to put fascia in a house?
Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.
What is the trim around the roof called?
Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards.
Can you hang gutters without fascia?
Fascia boards are important for attaching gutters; however, they are not completely necessary. A home without fascia needs to have gutters attached by roof straps. These straps act as a sling for your gutter. They’re fitted to the gutter hanger, and then they are attached directly to the roof.
Can plywood be used as fascia board?
Even though plywood siding isn’t a good fascia material, it works well for soffits, which are out of the rain and have to be painted and cut to install light fixtures and vents.
Should I use treated lumber for my fascia board?
Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.
How do you fix rotted wood fascia?
Soffit and Fascia Repair Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. Remove Rotted Fascia. Remove the rotted section of fascia. Remove Old Soffit. Pull down to remove the old soffit. Remove Rotted Rafter. Attach Cleat. Attach New Rafter. Seal Replacement Soffit. Attach Replacement Soffit.
What is another name for fascia board?
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
Can you use Hardie board for fascia?
HardieTrim board is a decorative non-load bearing trim product. Do not use HardieTrim to replace any structural component. HardieTrimboards can be fastened directly over a 2x sub-fascia or directly to rather tails.
What kind of nails do you use for fascia?
You must use exterior grade nails. A finishing nail, which has a smaller head and can be countersunk, will give a clean look but nails with a head will be more secure. You can hammer it farther into the wood and cover with putty, caulk or wood epoxy before you paint.
