Table of Contents
Deep sockets: A deep socket can help you reach bolts that are far down in a vehicle or piece of machinery that you’re working on. These are often needed when the bolt protrudes from the nut, like a tire lug nut, or the fastener is recessed.
What is the difference between a deep socket and a shallow socket?
Shallow, low-profile sockets (left image) fit spaces where there’s little clearance above the head of the fastener. Deep sockets (right image) can reach the nut on a longer, threaded bolt; they also allow you to reach recessed fasteners.
Do you really need deep sockets?
A normal, shallow socket may not even touch the nut before the top of the stud or bolt hits the end of the socket. In this case, a deep socket is necessary to accommodate the long end of the bolt and fit snugly around the nut. Without them, you may need a wrench instead of a socket to loosen that nut.
What are the 3 types of sockets?
Three types of sockets are supported: Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries. Datagram sockets allow processes to use UDP to communicate. Raw sockets provide access to ICMP.
How many inches is a deep socket?
Deep Socket – 1-1/16″ 1/2″ sq. Drive, 6″ Long.
What are deep sockets good for?
Deep sockets: A deep socket can help you reach bolts that are far down in a vehicle or piece of machinery that you’re working on. These are often needed when the bolt protrudes from the nut, like a tire lug nut, or the fastener is recessed.
Why are impact sockets black?
Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.
Whats bigger 3/8 or 1/2 socket?
3/8 is the smaller version ratchet, and 1/2 is the larger version ratchet.
What is a good socket set?
The Best Socket Sets of 2022 Stanley 3/8 in. and 1/4 in. Best Overall. Sunex Tools 3/8 Inch Drive Impact Socket Set 51-Piece. Best Value. WORKPRO 39-Piece Socket Set. Upgrade Pick. Sunex 3580, 3/8 Inch Drive Master Impact Socket Set. Best for Spark Plugs. Best for Mechanics. Best Torx Bit Set. Best Complete Set.
Which is better 6 or 12 point socket?
If your fastener is 12-point, which is somewhat uncommon, then you must use a 12-point tool. For 6-point fasteners, a 6-point tool is your best choice. Matching up the points between the tool and fastener means that you will maximize the surface area of steel in contact, making the tool less likely to slip or fail.
What are the 2 main types of sockets?
What are the different types of socket? Hex Sockets. Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets. Socket Bits. Impact Socket. Spark Plug Socket. Insulated Sockets. Pass Through Sockets. Adjustable Multi Sockets. Oil Filter Socket.
What are the 5 different types of socket?
The presumed processes are used to interact between the same type sockets with no other limitations which stop the communication of different types of sockets. Stream Sockets. Datagram Sockets. Raw Sockets. Packet Sequenced Sockets. Hex Sockets. Socket Bit. Impact Sockets. Spark Plug Sockets.
What is the biggest socket size?
Metric Socket Sizes Chart 3/8″ Drive 1/4″ Drive 1/2″ Drive 7mm 5mm 10mm 8mm 5.5mm 11mm 9mm 6mm 12mm 10mm 7mm 13mm.
Do they make extra deep sockets?
Some jobs call for custom/special tools like our Extra Deep Impact Sockets. Threaded rods and bolts in deep spots are reached easily and readily with these extra long sockets. We offer extra deep impact sockets with 3/8”, 1/2”, 3/4″ ,1”, 1-1/2”, and #5 spline drives. Prices below are listed up to 12″ in length.
How do you read socket sizes?
Socket sizes are determined by the size of the socket head and the size of the drive socket. An example of a typical socket size is a 13mm socket with ¼” drive. Although socket heads are available in both metric and imperial sizes, the ‘drive socket’ size of a socket is always imperial.
How do I know what size socket I need?
How to Determine the Right Size Socket for a Nut Turn on the digital caliper and set it to read in inches, not millimeters. Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides. Check the caliper display. Turn on the digital caliper and set it to read in millimeters, not inches.
What is the point of a 12 point socket?
The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.
Are 12 point bolts better?
It’s much better to use a 12-point bolt in this application. The 12-point is also a bit smaller than the flat of the hex; therefore, a smaller socket can be used to get down inside. The increased wrenching surface is a huge positive for a 12-point bolt being used in a specialty fastener situation.
Do impact sockets wear out?
It’s also worth mentioning that impact sockets wear out faster than chrome sockets, especially if you use them with a normal ratchet. Because the metal is softer, it wears away and deforms a very tiny bit when you use it, and this adds up over the years.
