Table of Contents
Definition of bulkhead 1 : an upright partition separating compartments. 2 : a structure or partition to resist pressure or to shut off water, fire, or gas. 3 : a retaining wall along a waterfront. 4 : a projecting framework with a sloping door giving access to a cellar stairway or a shaft.
What is the purpose of a bulkhead?
Bulkheads are typically used to conceal something. It could be plumbing pipes, electrical wires, duct work, or exhaust fans. When we create a new design for your home, we may want to remove these to make way for higher ceilings or to extend cabinet height. There are also times when we will add bulkheads to a room.
Where is bulkhead in house?
A bulkhead in construction is defined as a section of your ceiling (or wall) that protrudes from the normal line of the walls and ceilings in your home. Most often bulkheads are used to frame in HVAC or plumbing components that could not be ran through the wall/floor/joist system of the home.
What is a bulkhead in a basement?
A basement bulkhead is a structure and staircase that provides outside access to a building’s basement. A basement bulkhead is a structure that allows access to a basement from the outside of the house. The structure is usually made of concrete or stone, and it includes a stairway that leads to the ground level.
What is the purpose of a bulkhead in a kitchen?
A kitchen bulkhead is a boxy ceiling structure that is often built to hide unsightly services, such as wiring, pipes, plumbing, air-conditioning or structure.
What is the difference between a bulkhead and a soffit?
Soffits describe the area between the top of cabinets and the ceiling. Bulkheads describe the structure that fills in that area. Instead of empty space above cabinets, bulkheads are solid and box-like structures that fill in that wall soffit.
What is a plumbing bulkhead?
A bulkhead is a fitting designed to allow the drainage of a tank or reservoir through a hole. It creates a seal to avoid leakage and allows you to plumb the water from that tank to wherever you need it to go. This allows us to pull water from the bottom of the tank, as opposed to pulling from the very top.
Do you have to have a bulkhead?
Don’t worry– it happens to the best of us. But Bulkheads can prevent this by keeping waterfronts elevated and clear of rocks and hazardous areas. If you have a boat or are interested in having visitors come to your property via watercraft, a bulkhead is practically a necessity.
What is a bulkhead in electrical?
A bulkhead is simply a connector that is installed through the face plate of a GracePort while the cable has one end fixed to the face plate and the other end is typically a 10′ cable that goes inside the cabinet.
What is a bulkhead on waterfront property?
A bulkhead is a wall that separates a property from the water. In some areas, the property owners are responsible for maintaining the bulkheads. This can be an expensive hidden cost that some buyers can’t afford.
What is a bulkhead in concrete?
One of the most common applications for Stay-form is in the formation of bulkheads or construction joints in walls, base pours, slabs, footings, highway and bridge pours, and anywhere else that a single area of concrete must be divided for multiple sections or pours.
What are bulkhead seats?
On every aircraft worldwide, there are seats located against a bulkhead — a wall dividing either crew areas, galleys, or other classes of service on the plane. These seats can be coveted for some flyers, providing extra legroom, and, in some cases, extra service.
Are bulkheads expensive?
A bulkhead will allow you to remove the space between the top of your overhead cupboards and the ceiling. Having your bulkhead installed during the build will be much cheaper than adding it after construction. Bulkheads are usually not an expensive upgrade.
What is a bulkhead in a bathroom?
Bulkheads, or soffits, are areas of the ceiling that have been lowered and enclosed. They typically are installed above cabinetry to fill the space between the cabinet and the ceiling. They may also be used to conceal pipes or electrical wires that were installed after the room was framed.
Can you remove bulkhead in kitchen?
Kitchen soffits sometimes known as bulkheads can be difficult to deal with if they are creating too much of a protrusion in your home. A kitchen soffit can’t always be removed, but can often be disguised or covered up in ways that allow the soffit to blend in with the overall look of the kitchen.
What is a wall bulkhead called?
A bulkhead is a retaining wall, such as a bulkhead within a ship or a watershed retaining wall. It may also be used in mines to contain flooding. Coastal bulkheads are most often referred to as seawalls, bulkheading, or riprap revetments.
What is a Furdown?
Fur down is the wall over your cabinets. Many people call it soffit but I was corrected when using that term and was told the construction term is fur down. Some of you might have an empty space between the cabinets and ceiling.
What is a drywall bulkhead?
The word “bulkhead” is a maritime term that generally means a wall. The term can also be found among contractors referring to an interior wall, often associated with a kitchen or bathroom. Therefore, drywalling a bulkhead means to hang drywall on an interior wall.
What is a PVC bulkhead?
Schedule 80 PVC bulkheads are used in applications where a tank to pipe connection is needed. They are used to form inlets and outlets to install valves, pipes, hoses or faucets. PVC bulkhead fittings are durable, reliable and chemical resistant schedule 80 fittings made to handle pressurized fluid applications.
What is a bulkhead part?
A bulkhead is an upright wall within the hull of a ship or within the fuselage of an aeroplane. Other kinds of partition elements within a ship are decks and deckheads.
