Table of Contents
How do you figure board feet in lumber?
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you calculate board foot?
Here’s how to calculate the cost of your order: The number of square feet of a piece of lumber is calculated by multiplying the length (in inches) by the width (in inches) and then dividing by 144. Example: Calculating the total cost of a piece of lumber 6″ wide by 46″ long at a price of $6.30 per square foot.
How many board feet are in a 1×8?
1” x 8” x 1′ = 0.67 bd. ft. 1” x 10” x 1′ = 0.83 bd.
What is a board foot and how is it calculated?
A board foot is generally used for lumber, and is the multiplication of its width in feet, length in feet, and thickness in inches. A linear foot is a straight line that is 12 inches (1 foot) in length.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
What is board foot price?
Hardwoods are sold by the board foot, which is a calculation of the wood volume in the board. A board foot indicates a volume quantity equal to a board 12 inches by 12 inches by 1 inch, or one-twelfth of a cubic foot.
Why is board feet used?
The board foot is used to measure rough lumber (before drying and planing with no adjustments) or planed/surfaced lumber. An example of planed lumber is softwood 2 × 4 lumber sold by large lumber retailers.
How many board feet do I need?
To determine board feet for your project, take the desired board’s thickness, width and length, and multiply them together. From there, you need to divide it by 144 to determine the number of board feet you need.
What is the difference between board foot and linear foot?
Linear feet (LF) is a measurement of length of a specific sized board. Board feet (BF) is a measurement of volume which the a Board foot is 1 foot by 1 foot by 1 inch thick volume. If you have any questions about how to go about the conversions or the units feel free to ask below in the comments or contact us.
How many board feet is a 2x4x10?
A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667.
How do you figure board feet in the Philippines?
The formula is (Width x length x thickness) / 144.
How many board feet do I need to build a house?
House Construction To keep it simple and stick to a good average, say that 6.3 board feet are required for every square foot of house. So, a 1,000 square foot home would need 6,300 board feet to complete, while 12,600 board feet would be necessary for a 2,000 square foot home.
How many board feet are in a sheet of plywood?
Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
How many board feet are in a square foot?
By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness. Example 1: A 4/4 board 8 inches wide and 8 feet long has 5.33 bd. ft.
How many boards do I need?
To find the number of boards you need, divide the total deck square footage by the board square footage.
How many square feet are in a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
What does 600 sq feet look like?
So what does 600 square feet actually look like? If you can’t quite visualize how big 600 square feet is yet, no worries. Six hundred square feet is about the size of a standard three-car garage that has enough space to park the cars and walk around comfortably.
How do I calculate how much wood I need?
You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
