Table of Contents
The blower motor resistor is responsible for controlling the blower motor speed. Each fan speed selection is connected to one or more of the resistors in the blower resistor assembly. The change in resistance controls the current through the blower motor, which in turn limits the speed that the blower motor spins at.
What are the symptoms of a bad blower motor resistor?
Bad Blower Motor Resistor Symptoms Only One Speed From Blower Motor. One of the most common symptoms of trouble with the blower motor resistor is when the fan gets stuck in one setting. Various Airflow Settings Not Working. No Air Coming From Vents.
How do I know if I need a blower motor or a resistor?
Typically, if the fan will work on some speeds but not on others, the resistor is suspect. Okay, let’s say there’s no melting going on, but your fan doesn’t work on all speeds. Typically, if the fan will work on some speeds but not on others, the resistor is suspect.
Should I replace blower motor and resistor?
There is still a chance that the blower motor control could be faulty, but if the control knob feels good and all the fuses and relays are good, chances are you need to replace the blower motor resistor.
What happens when a blower motor resistor fails?
If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.
Why does my blower motor resistor keeps melting?
Trent, one of the biggest reasons for blower motor resistors to have shorten life is actually because of faulty blower motor drawing too many amps, some times melting wires/plugs, heating up resistors shortening their life. Many Dodge forums tell of this problem.
How do I test a blower motor resistor?
Place one lead of the Ohmmeter on terminal 1 of the resistor. Place the other lead on terminal 2 and check against specifications. If this circuit is open, showing infinity on the Ohmmeter, the blower resistor must be replaced. Move the lead from terminal 2 to terminal 3 and check this reading against specifications.
Why does my blower motor fuse keep blowing?
While the blower motor is clogged up, it can cause fuses to blow because it has to work hard to try to operate. The fuse is also attempting to run, and because it is unable, this increases the chances of a furnace fire.
Why does my blower motor only work when I hit it?
Blower motor only start working after i hit a bump. In most cases that is a sign of worn down blower motor brushes not making a good contact. In some cases the blower motor/resistor pigtail could cause erratic operation of the blower motor too.
Why does my blower motor only work on high?
Most car manufacturers use a series of resistors to make the heater blower motor run at different speeds. And when one or more of these resistors burn out, you’re usually left with only one heater blower motor speed—high. The resistor module is easy and inexpensive to replace.
How much is a motor blower resistor?
How Much Does a Blower Motor Resistor Replacement Cost? A blower motor resistor costs anywhere between $1 and $400. Factors that can affect its price include its condition, configuration, material, and set or kit inclusions. Labor may cost you an extra $45 to $55, depending on your area.
Can you drive without a blower motor resistor?
except blower motor resistors don’t “wear out”; they stop working altogether, suddenly, when the resistance wire inside burns through. Even then, it’s safe to drive the car provided that it has no exhaust leaks which might permit carbon monoxide or oxides of nitrogen to enter the passenger compartment.
Is there a fuse for the blower motor?
Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.
Why is my blower fan not working?
Make sure that the power cord hasn’t melted or a fuse hasn’t been blown. If your cables are looking fine, try unplugging the fan for a few minutes and then plugging it back in again. If unplugging and plugging your fan back in again doesn’t work, check the fuse box.
Do blower motor resistors get hot?
Yes, it would get hot, but the resistor(s) are often mounted in the air duct near the blower, so the air stream would cool them. If it were outside the air stream or if the air were blocked it would definitely get hot.
What would cause a resistor to burn up?
Burning of Resistor When a resistor has been overloaded with voltage exceeding its power rating, the resistor will become very hot to touch, darken considerably and possibly even melt or catch on fire. Although a resistor may appear damaged at this point, it can still be functioning.
Can you drive a car without a blower motor?
Your car’s blower motor is not only necessary for the operation of your air conditioner. Without a functioning blower motor your engine runs the risk of overheating. Start car and see if blower motor works. If fuse blows again, check for loose circuits.
Are all blower motor resistors the same?
Blower motor resistors have several resistors with different resistances. This controls the current that runs through the blower motor. Each fan speed selection is connected to one or more of the resistors in the blower resistor assembly.
How long does it take to replace a blower motor resistor?
takes about 45 minutes.
