Table of Contents
DESCRIPTION: 6013 is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel.
What’s the difference between 6011 and 6013 welding rods?
The 6013 electrode is best used for light to medium penetration on a thin metal, or sheet metal. The 6011 electrode offers more penetration than the 6013 so you can weld a slightly thicker material.
What is the difference between 7018 and 6013?
The Last Two Numbers Higher numbers mean the rod has more coating. A 7018 rod will have more coating, while a 6013 rod will have less coating.
What is a 6011 welding rod used for?
E 6011 electrode is a general-purpose electrode performs welding in all positions and efficiently in vertical-up and over-head positions; it is used mainly for sheet metal welding and low silicon deposit application. The electrode arc is easy to control and produces a flat weld bead with light slag formation.
Is 6013 a good rod?
True it can be used to weld thin material and is a good welding rod to train with that is very forgiving, but what is wrong with that? On the negative side, E 6013 does leave a heavy slag formation and is relatively shallow penetrating if not correctly used.
Is a 6013 Rod AC or DC?
6013 electrodes may be used in any position with AC or DC (straight or reverse polarity). recommended. Operate by holding a short arc or using the drag technique.
What is the easiest welding rod to use?
The easiest welding rod to use is a 1/8″ (3.2mm) E6013 rod. The fact that most welding schools start teaching with E6013 rods is proof enough. An E6013 has an easy arc strike and is the most forgiving to manipulation errors during welding.
How many amps does a 6013?
(2.38 mm) rod diameter 5 lbs. (2.26 kg). 6013 Tensile strength is 60,000 PSI Amperage 40-80 Amps AC, DCEN, DCEP (Either Polarity).
Which welding rod should I use?
First, select a stick electrode that matches the strength properties and composition of the base metal. For example, when working on mild steel, generally any E60 or E70 electrode will work. Next, match the electrode type to the welding position and consider the available power source.
What Rod do pipeliners use?
An 8010 welding rod is specifically used for vertical down welding and out-of-position welding techniques for steel pipes up to 80 Ksi tensile strength, although it can be employed in all welding positions if desired.
Can you weld stainless with 6013?
You can use 6013, depending on your welders capacity. It’s much like 6011 which i’ve used on SS before.
What is the best welding rod for rusty metal?
If you’re dealing with rusty metal, it’s recommended that you use a welding rod that’s rich in silicon or manganese, as they create thicker slag that takes the contaminants to the surface. A commonly used electrode with these properties is the 7018.
What is the prescribe current for electrode 6013?
SIZE AND RECOMMENDED CURRENT RANGE: AC, DC (+) DIAMETER (mm) 3.2 LENGTH (mm) 350 Current Amp Flat 90 – 130 Vertical & Overhead 90 – 130.
What welding rod do I use for thin metal?
What welding rod to use for thin or sheet metal? The E6013 welding rod is the best to stick weld very thin mild steel and is known as a sheet metal rod. An E6013 has a flux covering with high amounts of rutile.
What is the strongest welding rod?
Metal Web News claims that 6011 welding rods are capable of producing welds that feature a 60,000 psi minimal tensile strength. The 7018 welding rods produce stronger welds that feature minimal tensile strengths of 70,000 psi.
What is ideal to be used for vertical welding?
When selecting an electrode for welding vertically-up, we recommend that you opt for one that has low iron powder content. Iron powder takes more time to cool down. An electrode with less iron powder will set quicker and will not drip or produce slag. You can opt for either AWS 6010 or AWS 7018.
How do I choose a welding rod?
There are several factors to consider in welding rod selection: Base metal properties. Tensile strength. Welding current. Base metal thickness, shape and joint fit-up. Welding position. Specification and service conditions. Environmental job conditions.
What is the most common welding rod?
The most common rods in welding are 7018, 7014, 6013, 6011, and 6010. Using a 7018 rod as an example, you can determine the tensile strength of the rod by the first two numbers. The numbers represent the pounds per square inch (psi) that the resulting weld can withstand.
What is 6012 welding rod used for?
MILD STEEL STICK ELECTRODE EASYARC™ 6012 can be used for the general purpose repair, maintenance and fabrication welding job around the workshop and home, especially for Sheet metal lap and fillet welds. For welding where you require a smooth and clean appearance, the EASYARC™ 6012 electrode is the ideal choice.
What weld is applied to T joint?
Tee Joint Welding Tee joints are considered to be a type of fillet weld, and they can also be formed when a tube or pipe is welded onto a base plate. With this type of weld, it’s important to always ensure there is effective penetration into the roof of the weld.
Why does my welding rod keep sticking?
A stick welding rod sticks because the arc’s heat is not high enough to prevent the fusion between the molten rod and the puddle. Having low amperage settings or an arc length that is too short are the main reasons.
Is 7010 a low hydrogen rod?
The main difference is in the fact that 7010 is basically a cellulose-sodium, non low hydrogen electrode as is 6010 whereas 7018 is an iron powder, low hydrogen electrode. The alloying will be different as well as other finished surface characteristics and physical/mechanical properties.
Can you weld 6013 downhill?
It can be run downhill, but not if you’re trying to make good quality welds. It’s far better to use 6010 on DC reverse polarity or 6011 on AC for downhand stick (SMAW) welding. The flux on 6010 or 6011 is far easier to handle, (prevent inclusion), than 6013.
Can you run 6013 overhead?
In the flat position, you can get away some long arcing. But when you shift gears and start welding vertical or overhead, a long arc will be a problem. this bead was welded at exactly the same amperage as the one at the top of the page.
What is a good welding rod for overhead welding?
The 7018 electrode was designed for this very purpose. Classed by the AWS (American Welding Society), this is the perfect choice because the 7018 has a lower content of iron powder. This particular electrode makes a weld puddle that is able to freeze almost instantly and won’t drip off while working.
