Table of Contents
You will want to try and have 400, 800, 1,000, and 1,200 grit sandpaper. This is a good spread and will make clear coat removal that much more of a breeze. Be careful though any grit can potentially cause damage beyond the clear coat, but more on that later.
How do you remove clear coat with sandpaper?
You need to wet sand clear coats with very fine sandpaper. Soak a sheet of 1200-grit wet/dry sandpaper in water for 10 minutes. While it is soaking, apply masking tape to areas you don’t want to sand, such as moldings and panel edges. Remove the sandpaper from the water and wrap it around a sanding block.
Does 2000 grit sandpaper remove clear coat?
1,500 grit and 2,000 grit are used to sand the clear coat. Both grits are great for removing light clear coat scratches that can’t be removed by rubbing compound and buffing. Use 2,000 grit for final sanding to achieve smooth surface.
How do you remove old clear coat?
How to Remove Clear Coat from Car Step By Step Guide Soak the 400 Grit Sandpaper. Wash the Vehicle. Wet-Sand the Clear Coat. Proceed to Wet-sand Paint with Advanced Grit Sandpaper. Mask the Delicate Components and Car Surfaces with Tape. Dry-sand the Car. Wash the Sanded Car with Water.
How do you sand clear coat off a car?
Mask off the repair area using painter’s tape, applying about an inch outside the damaged area. Use an 800-grit sandpaper to sand down the rough clear coat until you can’t feel it anymore. Go lighter on the surrounding clear coat, as you are trying to smooth and blend the damaged area, not remove more clear coat.
What grit should I use to sand my car?
Dry sand using 180-grit sandpaper to remove rust or surface damage before moving on to a 320-grit paper to remove your previous 180-grit scratches. Whichever method that you decide, follow it up using 400- to 600-grit sandpaper to sand the paint to prep the existing paint surface for the new coatings to be applied.
Can you sand clear coat and respray?
The bad news is, you can’t just sand for adhesion and respray clear coat. You can sand for adhesion and spray a new coat of clear over the base, but it will never lock in, and it will always sit on top of the old clear at the edges. The new clear coat will never be as strong as the original and will fail much quicker.
What is 7000 grit sandpaper used for?
When used wet, it is suitable for lacquered surfaces, as well as metal and wood. It is available in grit sizes up to 7000. It can be used dry, but will load up more quickly than papers designed specifically for dry use because of its high-density abrasive coating.
Can you clear over 600 grit?
600 grit is aggressive enough to sand it flat without doing any damage to the clear coat. Remember, it is plastic, so too coarse of sandpaper can get very difficult to remove scratches from. Everything must be flat with 600!! Do not leave my texture left over to catch with the next step, it will not be flat enough.
What is 800 grit sandpaper used for?
800-1000 grit sandpaper is ultra fine. It’s used for final sanding and polishing of thick finishes.
Does wet sanding remove clear coat?
Wet sanding is used to remove severe clear coat scratches. So using a process so agressive, runs the risk of removing the clear coat entirely. This means you’ll be left with a matte finish, and no UV protection left. Wet sanding should only be performed by experienced detailers.
How do you remove top coat from car paint?
Starting with the 400 grit sandpaper you want to move over the car rubbing gently. The idea is to gradually start to weaken the clear coat. As you rub over the car you will start to remove the clear coating paint. This is probably the most important step to get right so it will take the most amount of time.
Can you polish clear coat without sanding?
You can buff without sanding but you won’t remove much texture, it’s common in a collision shop to just denib any dirt spots by spot sanding then buff the panel to make the shine uniform.
What removes clear coat?
Only use paint thinner to remove your clear coat surface in case you no longer want that paint job. Some car owners might recommend you try mineral spirits instead for a safe removal and use fine grit sandpaper to rub away any blemished clear coat areas.
How much does it cost to replace clear coat?
The short answer is anywhere from $500 to $10,000. But let me give you the parameters that determine the actual price to fix your peeling clearcoat. If you only have a small area of delamination, there is a chance that we can contain the problem by fixing just that one panel, which would save you some money.
