Table of Contents
Recommended wire gauge for extension cords Larger numbers mean smaller wires, which in turn means it can carry less power. A cord measuring 14 AWG is the thinnest we recommend—and at lengths of only 25 feet or shorter—and the much thicker 10 AWG is likely the thickest gauge you’ll find in an extension cord.
Which is better 10 gauge or 12 gauge extension cord?
Round down = 10 Gauge. Most devices will do fine with 12 gauge extension cords. Power hungry devices such as lawnmowers, heavy machines, require a lower gauge such as 10AWG. Keep in mind, the lower the gauge means the thicker the cord.
Which is better 12 or 16 gauge extension cord?
Within 50 feet of your outlet, use a 16-gauge light-duty cord for blowers. For a higher Amp or a greater distance from the outlet, go with a 14-gauge medium-duty cord. Look for a “W” on the jacket if the cord is rated for outdoor use.
Do I need 12 or 14 gauge extension cord?
For 100 feet, the 14 gauge cord works for 11-13 Amps, while the 12 gauge cord is best suited for 14-15 amps. If your cord is 150 feet long, the 14 gauge is best suited for 1-7 Amps, whereas the 12 gauge will support 8-10 Amps. This shows that the extension cord’s length also plays a part in the power it helps safely.
Is a 14 gauge extension cord heavy duty?
A 14-gauge cord is for medium or frequent duty applications (lawnmowers, power drills, table saws, television sets, etc.). These cords are also great for things like power tools, electric chainsaws, leaf or snow blowers, etc. They can handle larger tools and equipment and heavier use.
Can a 12 gauge extension cord handle 20 amps?
14 Gauge for 11-13 Amps. 12 Gauge for 14-15 Amps. 10 Gauge for 16-20 Amps.
What does 12 AWG mean on an extension cord?
12 gauge=heavy duty. 10 gauge=very heavy duty. The longer the extension cord, the bigger the drop in amps. It’s important to use a cord which is a heavy enough gauge for the tool or appliance.
Which is better 14 or 16 gauge extension cord?
Within 50 feet of your outlet, use a 16-gauge light-duty cord for blowers. For a higher Amp or a greater distance from the outlet, go with a 14-gauge medium-duty cord. Look for a “W” on the jacket if the cord is rated for outdoor use.
How far can you run 12 gauge extension cord?
12-Gauge Cords: If your tool load is between 10 and 15 amps and the length of the cord is 50 to 100 feet, you need a 12-gauge cord to safely power any tool. This is a great extension cord for many purposes.
What is the most heavy duty extension cord?
Best overall: Coleman 14 Gauge 100 Ft. Extension Cord. Best with a power strip: Anker Power Strip Extension Cord. Best heavy-duty extension cord: Watt’s Wire 14-Gauge Extension Cord.
What is a 16 gauge extension cord good for?
Sixteen-gauge cords are low wattage and are intended for use with small appliances such as portable fans, alarm clocks, table lamps, or floor lamps (note: an electronic device such as a TV or computer should be connected to a surge protector).
Can I use a heavy duty extension cord with space heater?
A heavy duty extension cord made with 12 gauge wire, rated for 20 amperes, not exceeding a length of 20 feet should be safe to use with most standard, 120 VAC plug-in space heaters.
What is a 10 gauge extension cord used for?
Heavy-duty 10 gauge extension cords When you’re going to be running an outdoor cable that needs the highest amperage possible, you need one of our ten gauge cables. Each cable handles up to 30 amps, which means that you can use it to power up to two 15-amp power tools or appliances.
Can 14-gauge handle 20 amps?
14 AWG must be protected at 15A, according to NEC 240.4(D)(3). 14 AWG can’t be used on a circuit with a 20A breaker. The screw terminals are the better choice if you want to put 15 Amp receptacle on a 20 Amp circuit with 12 gauge wire. You can use the side terminals.
Is 16-gauge extension cord good for Christmas lights?
For running Christmas lights, you want to make sure that any cord you use is rated for outdoor use. Pick a 16-gauge extension cord for light runs of 25 feet or less and go with a heavier duty 14-gauge cord for runs over 25 feet. Devices that generate heat, such as space heaters, should not be used with extension cords.
Can you connect a 14 gauge extension cord to a 12 gauge extension cord?
A 14 ga cord has more resistance than 12 ga so putting them together increases the resistance to about 2.5X so that’s bad. THere’s no way you can make the resistance per foot lower by chaining cords together. No.
How far can you run 12 gauge wire on a 20 amp circuit?
You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.
How many amps is a 12/3 extension cord?
Featuring durable 12-gauge wire construction and the ability to handle up to 15 amps, this extension cord is ideal for power tools, lawn-care equipment, and more. Available in 25-foot, 50-foot, and 100-foot lengths, the Extension Cord with Lighted End is sure to meet your needs.
What is a 12/3 extension cord rated for?
Typically, outdoor extension cords will have a number on the packaging or in the listing that looks like this: 12/3. The “12” represents the gauge wire rating (or wire diameter), and the “3” means it has three wires (or conductors) inside.Extension Cord Letter Designations. Designation Letter Meaning O Oil resistant.
What is the difference between 14 3 and 12 3 wire?
14/3 is often used for heavy duty extension cords. 12/3 would only be used for industrial purposes. Most kitchen appliances and many other home equipments are double insulated and don’t need a ground wire, so they have a 16/2 cord.
