Table of Contents
What is Wedging? Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What are the two types of wedging in ceramics?
So it’s important to learn how to wedge clay properly. There are various different ways to wedge clay— ram’s head, spiral wedging, and wire wedging to name a few.
What is the difference between wedging and kneading?
Wedging is a specific type of kneading. The goal with wedging is to mix the clay without adding air bubbles. If you do it correctly, you’ll remove air bubbles. I was taught two types of wedging- knead (or ram’s head) and spiral.
When should you wedge clay?
You should wedge at least 30 times when it’s fresh out of the bag. When it’s recycled clay, you will need to wedge it at least 100 times if not more depending on the condition of your clay.
What causes a ceramic project to explode?
What Causes Solid Clay To Explode When Heated Up. The primary cause is moisture which in turn puts pressure on the clay piece. Because the clay shrinks when it dries it puts pressure on the pottery. Another big problem is when you don’t wedge your clay the correct way thus leaving air pockets in your piece.
What is wedging in pottery?
What is Wedging? Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What does wedging mean in medical terms?
1. Suffocation that results from compression of the chest between two firm surfaces. It is an occasional cause of sudden infant death syndrome, e.g., when an infant becomes lodged between a sleeping partner and a wall or mattress.
What happens if you dont wedge clay?
In fact, improper wedging will more often add bubbles and you’ll just dry out your clay in the process. Simply make sure the pieces get enough drying time and have no plaster mixed in with the clay- that IS a sure recipe for explosions.
What does greenware mean in ceramics?
Greenware is unfired clay pottery referring to a stage of production when the clay is mostly dry (leather hard) but has not yet been fired in a kiln. Greenware may be in any of the stages of drying: wet, damp, soft leather-hard, leather-hard, stiff leather-hard, dry, and bone dry.
What is wedging clay similar to?
Wedging soft, plastic clay is similar to kneading bread dough. Clay tends to set up over time. And the growth of mold can discolor the surface and cross section and create non-homogeneous stiffness across the matrix. Pugmills produce laminations in a slug of clay.
What is kneading clay called?
Download Article. Last Updated: October 8, 2020. Before using clay for a project, you need to prepare it by kneading it, also known as wedging. Kneading clay properly will make it easier to work with and will eliminate air bubbles. Upper body strength and strong hands are helpful when kneading clay.
What do you call the process of kneading the clay in ceramics?
Wedging Process used to “knead” the clay to push “air bubbles out” is called wedging. Pinch “Pinch” in ceramics is a method of shaping clay by inserting the thumb of one hand into the clay and lightly pinching with the thumb and fingers while slowly rotating the ball in the palm of the other hand.
What are the 5 stages of clay?
Terms in this set (5) slip. a mixture of clay and water, the consistency of pudding. wet/plastic clay. new clay from the bag, very workable. leather hard. the clay has lost most moisture, but you can still carve into it. bone dry or greenware. totally dry clay, all moisture is gone, ready to fire. bisque.
What are the six stages of clay?
There are 6 essential stages of clay: 1. ) Slip. Slip is clay with added water to make it into a paste or liquid. 2.) Wet clay. Wet clay is used by many potters to produce their work. 3.) Leather-hard clay. 4.) Dry clay. 5.) Bisque. 6.) Glaze ware.
Do you wedge clay before Handbuilding?
If you’re throwing, no matter what, it’s a good idea to wedge the clay so no air pockets are trapped. Hand building is a bit more forgiving since your manipulation of the clay will allow you to see/feel and air pockets. Trapped air = explosions in the kiln and potentially loosing an entire kiln load.
How do you keep ceramics from exploding?
5 Ways to Prevent Explosions in Your Kiln Air dry pieces for as long as possible. I know, depending on where you live, this is easier said than done. Create a hole for steam to escape in hollow forms. Don’t build thicker than 1 inch. Fire using a long preheat. Fire slow.
Do air bubbles make ceramics explode?
While enclosed air doesn’t cause explosions, it can prevent thorough drying and trap moisture, which does cause explosions. When the kiln temperature rises, the air pockets fill with water vapor, which builds pressure as water turns to steam. The pressure of the steam causes the clay to explode from the inside.
What is the final stage of ceramic called?
Firing is the process of bringing clay and glazes up to a high temperature. The final aim is to heat the object to the point that the clay and glazes are “mature”—that is, that they have reached their optimal level of melting.
