Table of Contents
Water methanol injection is a performance enhancing solution to reducing high exhaust gas temperatures, such as those experienced during periods of high load. The process is often employed on diesel engines, which can encounter relatively high EGTs while towing.
Does water/methanol injection increase horsepower in diesel?
In diesel applications, no additional tuning is needed to maximize the water-methanol injection benefits. Typical power gains in 5.9L and larger applications with a 50% mixture of water/methanol are 50-100 WHP and a 100-150ft lb-ft increase in torque.
What are the benefits of water/methanol injection?
Other benefits of water/Methanol injection includes longer, more stable combustion expansion and progression, reduction or elimination of detonation, and cleaner and cooler piston tops.
How much HP does water/methanol injection add?
Running the specified Boost Juice through a #6 nozzle with a 5 psi activation point and full on by 12 psi, the water-meth kit improved the power output by as much as 44 hp.
Can methanol be used in a diesel engine?
Because of limitations on the development of neat methanol compression ignition engines, recent interests have been focused on the partial replacement of Diesel with methanol. either premixed with Diesel or injected into the air intake. Both methods can be readily applied to in use Diesel engines.
Can you run methanol injection without a tune?
It’s fine. The purpose of re-tuning is to take advantage of the ability to advance timing more with the meth. Otherwise it’s basically just another level of safety since it’s cooling the intake charge.
Can I put methyl hydrate in diesel?
Methyl Hydrate has a low freeze point and is suitable for de-icing applications, but it is not an anti-freeze for diesel fuel. It should not be added to diesel fuel, or used as a fuel.
Does water/methanol injection increase mpg?
The controlled water-meth shot increases the efficiency of the combustion process, and therefore promotes more power without requiring additional fuel that normally would act as a cooling agent. The increased efficiency yields improved fuel economy.
Does methanol clean your engine?
Methanol makes for a very strong cleaning agent and will clear away the gunk that builds up on the valves and keep your engine running healthy and happy. Because it vaporizes at a much lower temperature than water, the meth will pull heat from the intake tract, the piston crown, and the valves.
Does water injection increase horsepower?
Injecting water into your engine sounds crazy, but it’s a turbo tuner trick for big horsepower. The water immediately evaporates into the air in the manifold, reducing intake air temperature and increasing the air density.
How long does a tank of methanol last?
A larger tank should be considered if boost pressures of over nine psi are utilized in road racing, where a two-quart tank will run dry in as few as five to six two-mile laps. Under normal street use in a 400hp car, a two-quart tank will usually last about 450 miles.
Does methanol increase torque?
The extra power produced depends heavily on the concentration of methanol used and the volume injected. Typical power gains in 2.0L and larger applications with a 50% mixture of water/methanol are 10-20 BHP and a 15-25ft lb-ft increase in torque.
What are the problems of using methanol in an engine?
Adding methanol to gasoline increases vapor pressure which could lead to increases in evaporative emissions during warm weather. Addition of a cosolvent (typically higher alcohols) ameliorates both these issues and adjustment of the gasoline specifications can eliminate the increase in vapor pressure.
What are the disadvantages of methanol?
Some of the disadvantages of Methanol are that although its emissions are safer than that of gasoline, it has a high amount of formaldehyde emissions. As with Ethanol, it gets less gas mileage, so it would require more frequent fueling. The cost of Methanol is also slightly higher than that of premium gasoline.
Is methanol soluble in diesel?
The pure methanol/biodiesel combination proves complete solubility without adding an external agent. It can be deduced that the minimum amount of cosolvent is recorded for biodiesel–hydrous methanol, Jet A-1–hydrous methanol, and diesel–hydrous methanol, respectively.
What do you use for methanol injection?
What type of fluids can I use with my water methanol injection system? You may use pure water, pure methanol or any mix of the two fluids. Other forms of alcohol such as ethanol, isopropanol, denatured alcohol, etc may also be used.
Does methyl hydrate remove water from diesel?
If there is only a tiny trace of water in the diesel fuel tank, it is possible to remove it by adding a fuel additive with a methanol base. Make sure the hose is long enough to reach the bottom of the tank so that you can get all of the water out.
How much methanol do I add to diesel?
It has been shown in this research that the addition of 10% methanol to the diesel fuel may have a great impact on the engine performance and the environment.
Does diesel 911 Remove water?
Effective in all diesel fuels, including ULSD and biodiesel. De-ices frozen fuel-filters no requirement to change fuel-filters. Prevents fuel-filter icing. Reliquefies gelled fuel in minutes no tow truck needed Removes water from fuel system extends life of fuel-filters, fuel-injection pumps and fuel injectors.
What is the octane rating of methanol?
Methanol reported as having an octane rating of 133 (RON) and 105 (MON), with a combined octane rating of 119 ((R+M)/2). In contrast the combined octane rating of regular gasoline is 87 and that of premium gasoline is 93.
