Table of Contents
It means “unbalanced and retrying” so it’s going to retry by adding a lot more water.
What do you do when your Samsung washer says UR?
Occasionally, the UR error code is caused by a fault with the electronic controller, which has mistakenly identified an unbalanced load error when there is none. Resetting the washer by disconnecting the power to the washer for 10 minutes should fix the issue.
How do you fix an unbalanced washing machine?
If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. You may need to open the front access panel to loosen the lock nuts that control the legs.
How do I balance my Samsung washer?
1 Tap Settings on your washing machines display. Tap Calibration. Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
How do you reset a Samsung washer?
Resetting your washing machine is a simple procedure. Unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to dissipate from the washer (typically 1 to 5 minutes at the most), and then plug it back into the wall. That’s all there is to it.
Why does my washing machine always go off balance?
The most likely culprit is the suspension rods. These rods help to limit the amount of side to side and front to back movement that happens when a washer enters the spin cycle. As these rods age, they no longer work as intended and need to be replaced.
What causes an unbalanced washing machine?
Redistributing The Washing Machine If four towels are sitting on one side of the washer and a set of sheets on the other, it will cause the machine to become unbalanced during the spin cycle. Furthermore, if you overfill the washer, it doesn’t give much room for the clothing to move around during the wash cycle.
Why is my washer drum loose banging around?
If your washing machine makes a loud rumbling or repetitive banging sound, which is particularly bad on a spin cycle, then it is most likely due to loose or worn out drum bearings.
Why my Samsung washer shakes too much?
Common solutions for: Samsung Washer vibrating or shaking. One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
Why does my Samsung washer shake so much?
This can happen when the four washing machine legs are not all making secure contact with the ground, or if a large bulky item or huge amount of laundry is in the washing machine. If you just got your front load washer, but didn’t remove the shipping bolts, then it will shake a lot.
Why is my new washer shaking?
Your washing machine needs to stand level and balanced on its feet to function properly. Your washing machine might vibrate or shake during operation if the load inside the drum is unevenly distributed. In this case, absorbent items such as rugs and blankets are generally the cause.
Do Samsung washers have a reset button?
Reset your washing machine There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.
How do I know if my washing machine balance ring is bad?
The balance ring is filled with fluid. This fluid helps to dampen the vibration of the washer. If this fluid leaks out of the balance ring, the washer tub will vibrate and shake during operation. Check the balance to determine if is still filled with fluid.
Why does my Samsung washer keep saying DC?
A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Why is my Samsung washing machine so loud when it spins?
If the tub bearing system is defective the washer can become very noisy. The tub bearing helps to keep the inner tub spinning smoothly. If the washer is noisy during the spin cycle or is leaking from the bottom of the tub near the transmission, the tub seal and bearing are likely defective.
Why does my Samsung washer make noise when spinning?
In most cases, this noise is due to overloading. To test if service is required, run a cycle with approximately 4 soaking wet bath towels (or a load with similar weight). If the noise occurs during this cycle, visit our Support Center to request service.
How do I get my washing machine drum back on track?
Check your washer for an unbalanced load. Turn off the machine, and open the door. Remove the clothing or other items from the washer, and redistribute them evenly around the drum — making sure their weight is redistributed evenly. Close the door, and turn on the machine again.
How much shaking is normal washer?
The short pause and vibration when the washer spin cycle reaches approximately 400 RPM is a normal. If the washer operates fine but vibrates, the leveling legs may have become loose.
Is it normal for washing machine to shake during spin cycle?
All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. When shock absorbers weaken or become damaged, unbalanced loads will cause the washer to shake or move and the machine will often make a loud banging sound during the spin cycle.
