Table of Contents
It means “unbalanced and retrying” so it’s going to retry by adding a lot more water.
What do you do when your Samsung washer says UR?
Occasionally, the UR error code is caused by a fault with the electronic controller, which has mistakenly identified an unbalanced load error when there is none. Resetting the washer by disconnecting the power to the washer for 10 minutes should fix the issue.
How do you fix an unbalanced washing machine?
If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. You may need to open the front access panel to loosen the lock nuts that control the legs.
How do you reset a Samsung washer?
Resetting your washing machine is a simple procedure. Unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to dissipate from the washer (typically 1 to 5 minutes at the most), and then plug it back into the wall. That’s all there is to it.
How do I balance my Samsung washer?
1 Tap Settings on your washing machines display. Tap Calibration. Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
Why does my washing machine always go off balance?
The most likely culprit is the suspension rods. These rods help to limit the amount of side to side and front to back movement that happens when a washer enters the spin cycle. As these rods age, they no longer work as intended and need to be replaced.
What causes an unbalanced washing machine?
Redistributing The Washing Machine If four towels are sitting on one side of the washer and a set of sheets on the other, it will cause the machine to become unbalanced during the spin cycle. Furthermore, if you overfill the washer, it doesn’t give much room for the clothing to move around during the wash cycle.
What causes an unbalanced load washing machine?
An unbalanced washer can result from the way your laundry positions itself inside the drum during the cycle or a washer that’s out of level. Balance your front-load washer to avoid damage to the interior components and costly repairs.
Do Samsung washers have a reset button?
Reset your washing machine There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.
Why my Samsung washer shakes too much?
Common solutions for: Samsung Washer vibrating or shaking. One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
Why does my Samsung washer shake so much?
This can happen when the four washing machine legs are not all making secure contact with the ground, or if a large bulky item or huge amount of laundry is in the washing machine. If you just got your front load washer, but didn’t remove the shipping bolts, then it will shake a lot.
How do I know if my washing machine balance ring is bad?
The balance ring is filled with fluid. This fluid helps to dampen the vibration of the washer. If this fluid leaks out of the balance ring, the washer tub will vibrate and shake during operation. Check the balance to determine if is still filled with fluid.
Why does my Samsung washer keep saying DC?
A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
What happens if my washer is not level?
If your washing machine is not perfectly level with all four legs touching the floor it can bang and rock back and forth. This isn’t good for the machine and may damage walls and floors and anything else near the machine. Severe vibrations are a leading cause of future leaks and mechanical problems.
Why is my Samsung washing machine not working?
Debris filter choked – If debris filter is choked then water will not drain and spinning will not work. Open the filter access cover located on the lower corner on the front of the washer. Now, find the drain hose and remove the cap. Be sure to hold the hose tip upright until you have a bowl or container in place.
Why does my Samsung washer stop mid cycle?
Samsung Washer stops mid cycle If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. If the door lock is damaged or does not latch properly, replace it.
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
