Table of Contents
The CD recorder displays a C14 or TOC error when the unit cannot read the Table of Contents (TOC) information on the CD. This issue is usually caused by the media being use. To resolve this error, use new media.
What is a TOC error on a Kenwood car stereo?
“TOC Error” means either no disc has been loaded into the magazine, the disc is upside down, or the disc is badly scratched.
How do I reset my Kenwood car stereo?
Kenwood Car Stereo is the best in the market of stereos.Kenwood Factory Reset Step 1: Hold Eject CD And Volume button. On the left of the CD slot, you will find the Eject CD button. Step 2: Press The Reset Button. Step 3: Tap the “Initialize All” button. Step 4: Again, press the reset button.
Why won’t my CD player read discs?
Clean your CDs before and after playing them. Although the compact disc has a much longer lifespan than does something like a cassette tape, it can be more fragile. Scratches, dust or other damage to the data side of the CD will cause many CD players to fail to read the CD or cause the CD to skip.
How do I get my Kenwood radio out of Protect Mode?
Turn off the receiver and let it cool for a few hours; then try again. If the protection mode warning doesn’t go away on its own, press the reset button. If that doesn’t work, disconnect the power lead from your receiver for 30 seconds and then reconnect it. If it still doesn’t work, it’s time to take it to the dealer.
Why is my Kenwood radio not working?
If the radio will not turn on, first check the fuse located on the back of the radio. If the fuse is burnt, replace with a fuse of the same amperage rating. The guide to replacing the fuse can be found here.
Can you fix a CD player that won’t read?
If your CD player that plays burned CDs or regular commercial discs is not reading, is skipping or is experiencing tray issues, you may be able to solve the issue with basic CD player repair. If the problem persists with the new disc, remove all discs and run a power cycle to reset the player.
How do you clean a slot loading CD player?
How To Clean A Slot Loading CD Player? Step 1: Confirm there is no CD in your player. Step 2: Blow the dust away. Step 3: Take the lens cover out. Step 4: Choose the cleaner. Step 5: Apply isopropyl alcohol on the lens. Step 6: Wait for the lens to dry. Solution 1: Use cleaner discs. Solution 2: Dismantle the player.
Why does my DVD player keep saying error disc?
The message DISC ERR is usually displayed when the unit ca see the disc but not play the disc. This usually occurs when the disc is scratched or dirty. The message NO DiSC is displayed when the unit simply can not read or detect the disc at all. This can also occur if the disc is scratched or dirty.
Why is my Kenwood radio flashing protect?
Kenwood equips its receivers with a protection mode to safeguard them. Your stereo receiver is going into protection mode because the receiver has an internal short, a speaker is bad or the speaker wiring has a problem, such as incorrect wire gauge or bad connections.
What does ATT mean on Kenwood radio?
The Attenuation (ATT) function is designed to mute the car stereo when you receive a telephone call.
Why does my Kenwood radio say HF Error 68?
Bluetooth Messages Í The unit cannot communicate with the Bluetooth audio player. Í The unit cannot communicate with the cell-phone. ö “HF ERROR 68” Í The unit cannot communicate with the cell-phone.
Where is the fuse on a Kenwood radio?
The fuse can be found on the back of your radio indicated by the red square in the photo.
Why is my car radio display not working?
If the display panel on the car stereo receiver is dim or does not light, the connectors may need to be cleaned or there may be a mode setting that needs to be adjusted. If the car audio system does have this setting, try adjusting it to the different dimmer settings.
How do you update a Kenwood head unit?
Firmware Update Procedure Connect the “Update Media” to the CD/USB receiver. When the audio file starts playing or “NO MUSIC” appears, press the [MENU] button to enter menu mode. Connect the “Update Media” to the CD/USB receiver. •.
How do you bypass a Kenwood Security Code?
How to Bypass the Kenwood 5120 Enter your car and insert your key into the vehicle’s ignition. Press and hold the “Add” and “Track Up” buttons on your stereo system at the same time. Hold the buttons until the display reads a blank screen with four dashes. Release the two buttons and enter your code using your remote.
Can I use a DVD lens cleaner on my CD player?
Product Description. The CD/DVD Laser Lens Cleaner is designed for use in CD and DVD players. It uses a 6 ultra soft brush system to safely remove dust and dirt from the laser lens of the disc player.
Can a CD player be cleaned?
Try a lens cleaner disc. Cleaner discs usually run automatically when you insert them, but check the product instructions first. Do not use a CD cleaner disc on a combination CD/DVD player. Cleaner discs made for CD players will scratch a DVD drive. Check the product label for warnings before buying.
Do DVD cleaner discs work?
Instead, you’ll have to rely on cleaning discs — yes, the very same discs forbidden by DVD manuals! Cleaning discs are designed like regular DVDs, but with a tiny brush on one side. As the DVD spins, the brush knocks off dirt and dust particles from the lens. It’s great when it works, but use with caution.
How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
Why won’t my DVD player read my DVD?
Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.
