QA

Quick Answer: What Does Serpentine Belt Do

What Does a Serpentine Belt Do? The serpentine belt plays an essential role in running your car’s systems, explains TheDrive.com. It powers the alternator, the power steering pump, the air conditioning compressor and, in some vehicles, the water pump. The serpentine belt rotates constantly when the car is running.

What are the symptoms of a bad serpentine belt?

Bad Serpentine Belts Cause Vehicle Performance Issues Flickering lights on start up. Failure to start. Dimmed headlights. Continuously illuminated amperage light.

Can you drive with a broken serpentine belt?

Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you’re likely to get exhausted very quickly from driving.

Does serpentine belt affect engine?

The serpentine belt is also known as an alternator belt, fan belt, or accessory drive belt. If your serpentine belt wears out, becomes damaged or contaminated, or breaks, engine accessories will not be able to spin at the proper speed, leading to decreased power to the electrical system.

How much does it cost to replace a serpentine belt?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

What does a worn serpentine belt sound like?

Although there are a few causes of a squealing engine, one of the most common is a bad or failing serpentine belt. Belt squeaking is also especially pronounced when accelerating, on startup, and when making a U-turn. The noise is loud and sounds like a squeal, loud chirp, or squeak.

How long can I drive with a bad serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.

What happens if belt breaks while driving?

When the timing belt breaks, the crankshaft will continue to spin at 1000 rotations per minute, while the camshaft will stop turning. As a result, the pistons will continue to rise and fall in their cylinders, but they will strike closed valves.

What causes a belt to break on a car?

Serpentine belts can fail in a few different ways. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

How long does it take to change the serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

Should I replace tensioner with serpentine belt?

Tensioners add pressure from an adjustable pivot point or spring mechanism to keep your serpentine belt taut as it circulates around the engine. There is no recommended timeframe in which to replace your tensioner, especially as the belt itself usually needs replacing before the tensioner does.

Can I replace serpentine belt myself?

Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

How often should you replace your serpentine belt?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

How long does a serpentine belt last?

Typically, serpentine belts last anywhere from 50,000 to 100,000 miles. Over time, friction and heat break them down.

Can a bad serpentine belt cause loss of power?

The battery will die after a while since the alternator can no longer charge it. The water pump stops working too, so the engine starts to overheat after some time. At a point, the engine will pack up and will require being towed. So yes, a bad serpentine belt cause loss of power.

Can you start a car without a serpentine belt?

The short answer is yes, your car will start even if the serpentine belt is broken or missing. To get the car going, the battery sends power to your starter motor. However, you do need your serpentine belt if you want the car to run for longer than a few minutes.

What can cause a serpentine belt to shred?

Tom: Another possibility is a bad idler pulley or tensioner pulley. Those are sort of “dummy” pulleys that are used to alter the direction of the belt. If a bearing goes bad on one of those pulleys, it tends to tilt, and that could cause the belt to shred.

How much does it cost to replace a drive belt?

Once the belt starts to wear thin or breaks, it will need replacing, if those parts are going to work as they should. You will pay between $120 and $160 for this replacement job. The labor should cost about $80, while parts will run you about $60.

Is the serpentine belt the same as the drive belt?

Sometimes called a fan belt, alternator belt, or accessory drive belt, the serpentine belt is spun by the engine crankshaft and, in turn, spins, or “drives”, the accessories. Cars of the past relied on multiple drive belts, but today’s vehicles (usually) count on just one, the serpentine belt.