Table of Contents
Laminated veneer lumber (LVL) is one of the most widely used engineered wood products for constructional applications. It is a composite product manufactured from multiple thin layers of veneer that are aligned with the length of the finished lumber.
Is LVL stronger than wood?
Laminated veneer lumber (LVL) studs can provide ultimate strength against wind and shear-loads and can be up to two and a half times stronger than standard framing lumber of the same dimension in compression and tension, which means a wood-framed house can be designed and constructed to withstand 100 mph or more .
Is LVL stronger than beam?
So, yes. LVL beams will bear more weight than the same size wood beam. In all those things, LVLs are superior. If you want a 4″x14″x20′ LVL beam, you can buy one.
How far can you span a LVL beam?
Due to its strength, an LVL beam can span up to 60 feet and is much stronger than traditional lumber. Generally, you can find LVL beams in 4-foot increments starting at 24 feet and going up to 44 feet long, with special orders up to 60 feet. LVL beam thickness is usually between 1 ¾ and 7 inches.
What is the purpose of a LVL?
LVL is suitable for use as beams, trusses, planks and rafters. When cross-bonded for increased stiffness it can be used to form wall and floor panels with load-bearing capacity. While frequently used solely as a concealed structural component of a building, finished appearance grades are also used.
What are the disadvantages of LVL?
Although its dimensional stability is better than solid wood, the product may result in some defect, such as warping, if it is not properly stored in the warehouse. Also, LVL requires high capital investment to have relatively low production cost.
Can you drill through a LVL?
Whenever possible, avoid drilling vertical holes through LVL beams unless the beam width is at least 3-1/2 inches. Prior to drilling any vertical holes, an engineer or architect qualified in wood design should be consulted.
Will LVL beams sag?
It is not unsafe because the LVLs will have to be seriously sagging before anything would happen. 5/8″ is just enough to disturb the finish and annoy you. You can either install a beam in the middle of the room or put in a better header.
What size LVL beam do I need to span 30 feet?
What size lvl beam for a 30 foot span:- as per general thumb rule, for a 30 foot span, size of LVL beam or GLULAM should be 16-18 inches deep and 4 inches wide, thus you need something like a 16-18″ GLULAM or LVL to span upto 30 feet used for residential building or projects.
Do LVL beams shrink?
That, combined with the fact that LVLs are made from thin strips of lumber to promote stability, means that there will be very little change in the height or the length of the beam after it’s installed.
What size LVL Do I need to span 20 feet?
What size lvl beam for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of LVL beam or GLULAM should be 10 to 12 inches deep and 3 inches wide, thus you need something like a 10-12″ GLULAM or LVL to span upto 20 feet and can use simple 2×14 dimensional lumber at 16″ apart from centre as floor joists.
What size LVL Do I need to span 18 feet?
What size lvl beam for a 18 foot span:- as per general thumb rule, for a 18 foot span, size of LVL beam or GLULAM should be 9 to 10 inches deep and 3 inches wide, thus you need something like a 9-10″ GLULAM or LVL to span upto 18 feet and can use simple 2×12 dimensional lumber at 16″ apart from centre as floor joists.
What size LVL will span 24 feet?
LVL beam size for a 24 foot span:- as per general thumb rule, for a 24 foot span, size of LVL beam or GLULAM should be 12-14 inches deep and 4 inches wide, thus you need something like a 12-14″ GLULAM or LVL to span upto 24 feet used for residential building or projects.
Is plywood a level?
LVL is an engineered wood product that uses multiple layers of thin wood, oriented in the same direction, assembled with resins . Plywood sheets are used in many areas such as furniture, shuttering and container flooring. LVL is typically used for headers, beams, rimboard, and edge-forming material.
What is an LVL structural beam?
Laminated veneer lumber (LVL) is an engineered wood product that uses multiple layers of thin wood assembled with adhesives. It is typically used for headers, beams, rimboard, and edge-forming material. Due to its composite nature, it is much less likely than conventional lumber to warp, twist, bow, or shrink.
How much does an LVL beam cost?
LVL beams cost on average $3 to $12 per linear foot for the material or $50 to $200 per foot installed. LVL beams are more cost-effective and durable than regular wood beams. LVL beams are fire-resistant, shrink-proof, and easy to install, especially in long spans.
