Table of Contents
The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault within as little as 1/40 of a second.
What is the difference between a GFCI outlet and a regular outlet?
You can tell standard and GFCI outlets apart simply by looking at them, as their appearance differs. Standard outlets are smaller in size versus GFCI outlets. Standard outlets do not have testing buttons on the outlet face as GFCI outlets do.
What is the point of GFCI outlets?
A GFI, or GFCI – Ground Fault Circuit Interrupter device protects us from receiving electric shocks from faults in the electrical devices we use in our home. It works by comparing the input current on the hot side to the output current on the neutral side.
Do I need GFCI on every outlet?
The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops. In bedrooms, living rooms, and other areas where water fixtures are not found, regular outlets are fine—and they are still installed in today’s new homes.
Can you put a GFCI outlet on a regular outlet?
You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. We’ll show you how to replace a standard duplex receptacle with a GFCI and wire it to protect other outlets.
Can I install GFCI myself?
After you have removed the old outlet, you can begin replacing it with the new GFCI outlet. Using your needle nosed pliers or wire cutter, make sure the wires are straight and able to be put into the new GFCI outlet. You only want to be rewiring your GFCI outlet into the line screws.
How do I know if my outlet is GFCI?
A GFCI receptacle is easily recognizable. Simply look for the test and reset button on the face of the outlet. When installed, any electrical device that is plugged in will be protected in the case of a ground fault. This also includes any electrical outlets that are connected on the same line.
What must you do to ensure that the GFCI devices you are going to install are in good condition?
GFCIs should be tested monthly to ensure they are in working condition. Whether you have a receptacle or circuit breaker GFCI, pushing the TEST button should turn off the power to the circuit. For the receptacle-type GFCI, pushing the TEST button should cause the RESET button to pop up.
Should all bathroom outlets be GFCI?
Bathrooms – All bathroom receptacles should have GFCI outlets installed. Any outlets within six feet of this sink (and the dedicated washing machine outlet) should be equipped with GFCI outlets. Outside – All outlets installed outside of your home should be GFCI outlets.
How much does it cost to install a GFCI outlet?
The average cost to install a GFCI outlet is $220 per outlet when you hire a licensed electrician. This cost includes the outlet and labor expenses. The cost to hire an electrician is $80 to $150 per hour for one GFCI outlet, with a minimum charge of one hour.
Does a refrigerator need a GFCI?
A refrigerator shouldn’t be plugged into a GFCI outlet. GFCI outlets are used in areas of the home with water or moisture. These include bathrooms, basements, and kitchens. This type of outlet is important because it reduces the risk of electrocution and electrical fires.
How many outlets can 1 GFCI protect?
There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.
Does a dryer need a GFCI?
First, receptacles installed to serve kitchen countertops must be GFCI protected. Therefore, clothes dryers are now required to be GFCI protected because they are in the laundry area.
What happens if you replace a GFCI outlet with a regular outlet?
GFCI’s can wear out. If you’re willing to give up the protection then yes, you can switch back to a normal grounded outlet and the wiring should be basically the same. You’ll need a new face plate, of course, unless you get a duplex that has the same rectangular outline.
Do you have to replace GFCI with GFCI?
In most cases where GFCI outlets are placed, they are there because of a code requirement. This means that if they fail, they need to be replaced with another GFCI outlet.
Why can’t I reset my GFCI outlet?
A GFCI or GFI outlet may not reset because there’s a ground fault occurring at a regular outlet that’s not working, or somewhere else downstream of the GFI. Chances are, there’s a ground-fault at one or more downstream wires, receptacles, or electrical devices. An incorrectly installed GFI may be problematic too.
What happens if you wire a GFCI backwards?
If you miswired the GFCI it may not prevent personal injury or death due to a ground fault (electrical shock). If you mistakenly connect the LINE wires to the LOAD terminals, the GFCI will not reset and will not provide power to either the GFCI receptacle face or any receptacles fed from the GFCI.
What causes a GFCI to trip repeatedly?
Circuit overload occurs when more amperage flows through an electric wire or circuit than it can handle. This may happen if you connect malfunctioning or defective appliances. Loose, corroded wires or connections may also be to blame. Once the GFCI outlet senses an overload, it trips or “breaks” the circuit.
