Table of Contents
The process by which individual particles of clay aggregate into clotlike masses or precipitate into small lumps. Flocculation occurs as a result of a chemical reaction between the clay particles and another substance, usually salt water. 2. 0.
What do you mean by flocculation?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Step 1: Coagulation. Small particles usually carry negative surface charges that hinder aggregation and settling (1a).
What is flocculation and how does it work?
How does flocculation work? Flocculation is based on a chemical process. It involves adding chemicals to the wastewater in sequence and allowing tiny solid particles to collect together in a larger mass called a floc. As a treatment of wastewater, flocculation is carried out in stages.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
Why do Flocculated particles not cake?
Repulsive forces between particles are overcome and a hard cake is formed which is difficult, if not impossible, to redisperse. The sediment is loosely packed and possesses a scaffold-like structure (large volume of final sediment). Particles do not bond tightly to each other and a hard, dense cake does not form.
Can you add too much flocculant?
Adding too much flocculant can cause its own issues. Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
How do I make my pool water crystal clear?
How to Make Your Pool Crystal Clear Again
- Keep Up with pH and Chlorine Levels. Do you have a water testing device in your supply kit?
- Run That Filter. It’s recommended that you run your filter for 8 to 10 hours a day when using your pool.
- Skim, Skim, Skim. Yes, something that simple can be the trick to clear water.
- Shock the Pool Once a Week.
What is the principle of flocculation?
Coagulation – flocculation is physico-chemical process that facilitates the agglomeration of fine particles (colloids) contained in water to form a floc that can be easily filtered from water. Effluent (waste water) must be treated before it is discharged or before the water is re-used.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
What does flocculant do to pools?
What is Pool Flocculant? Also known as pool floc, this chemical is like a super-powered version of clarifier. It also causes the particles in your pool to coagulate and clump together. The difference is, flocculant creates larger clumps that sink to the bottom of the pool, and cannot be removed by your filter.
Does flocculant kill algae?
There are two major chemical treatments for algae: flocculant and chlorine. Flocculant, or floc, is a chemical and mechanical process that works fast but requires work on your part. Then, you must turn it off to give the algae time to settle. If you use chlorine shock, you should run the filter almost continuously.
Is polymer a coagulant or flocculant?
Polymers (long-chained, high-molecular-weight, organic chemicals) are becoming more widely used. These can be used as coagulant aids along with the regular inorganic coagulants. Anionic (negatively charged) polymers are often used with metal coagulants.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Is Vinegar a Deflocculant?
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available.
What causes flocculation?
In dispersed clay slurries, flocculation occurs after mechanical agitation ceases and the dispersed clay platelets spontaneously form flocs because of attractions between negative face charges and positive edge charges.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
How fast does flocculant work?
How Long Does It Take to Work? The beauty of flocculants is that they work fast. Your pool can be cleaned in 24 hours, whereas with a clarifier, it takes a few days for the filter to do its job.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is Redisperse difficult?
The repulsive forces between individual particles allow them to slip past each other as they sediment. The slow rate of settling prevents the entrapment of liquid within the sediment, which thus becomes compacted and can be very difficult to redisperse.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is flocculant harmful to humans?
Corrosive Product, contact with eyes or skin can cause burns; ingestion or inhalation can cause internal damage, if this occurs immediate medical assistance is required. Contact with skin: irritation. Contact with eyes: irritation. Swallowing: irritation to mucosal and digestive tract corrosion.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
