Table of Contents
The Maytag oven F1 error code indicates the touchpad or control board (clock) on your oven is faulty. Refer to your owner’s manual on how to test for a faulty touch pad and how to replace the touch pad, control board, or both.
How do I reset my Maytag stove?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
How do you fix F1 on stove?
Press the “Probe” button on the keypad and use the keys to enter the desired cooking temperature. Push “Start” to reset the probe and begin cooking. If the F1 error code does not return, the problem is resolved and cooking should proceed normally.
How do I reset my Maytag oven control panel?
Make sure the Control Lock function is turned OFF. Some ovens may be equipped with Control Lock. Look for “Control Lock” on the oven control console, then reset by, typically, pushing & holding for 3 seconds.
Why does my Maytag oven keep beeping?
When the oven beeps, it is to alert the user that the food is complete. Some models will continue to beep as a reminder to take the food out of the oven. Convection ovens also sometimes include a temperature gauge that will cause the oven to beep when it’s at 75% of the original cooking time.
How do I fix the F1 error on my Maytag oven?
To fix the error, try pressing the key to unstick it. If it continues to be an ongoing issue, you will have to replace the touch pad or touch pad/control board if they are one assembled unit. The Maytag oven F1 error code indicates the touchpad or control board (clock) on your oven is faulty.
How do I reset my oven control board?
But the first thing you should do is try to perform a hard reset by unplugging the oven, waiting about 30 seconds, and then plugging it back in again. In some cases, this will be enough to reset the control board and get your oven working again.
How do I turn off F1 on my oven?
When an F1 error on Frigidaire oven occurs, the display flashes the code and beeps at the same time. To stop the flashing and beeping, press the “Cancel” button to stop the beeping and clear the error code.
What does F1 mean on electric stove?
The “F1” fault code indicates one of the following possible failures: Shorted keypad which is part of the Electronic Oven Control (EOC) Failed Electronic Oven Control (EOC) Oven temperature sensor is bad (this is located inside the oven cavity at the upper left rear corner).
What does F1 mean on a gas stove?
The F1 error code on this model of Frigidaire range indicates that the electronic oven control board detects one of the following errors: Failed oven temperature sensor probe. Shorted keypad. Internal electronic control board error caused by a power glitch or surge through the electrical lines.
Do stoves have a reset button?
The only way to reset the range is by unplugging it for 2-5 minutes.
How do you unlock the controls on a Maytag oven?
Maytag Oven Door is Locked – What Should I Do? Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door. Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.
Why isn’t my Maytag oven won’t heat up?
A Maytag oven not heating at all may be due to a blown thermal oven fuse. A tripped fuse shuts off power to the oven, making it unable to heat at all. If a thermal fuse trips when overheating isn’t a possibility it’s likely that the fuse is faulty and needs replacement.
How do I stop my Maytag stove from beeping?
How to Fix Beeping on a Maytag Gemini Range Check the display on your Maytag Gemini range if you hear a beeping sound. Press the “CANCEL” button to get rid of the beeping sound and clear the fault code. Disconnect your Maytag Gemini range from its power outlet if it’s still beeping.
How do I get my stove to stop beeping?
Unplugging your oven for 30 seconds and plugging it back can also reset your oven and stop it from beeping continuously. If your oven is a digital one and it’s displaying an error code, simply check the error code list that’s in the owner’s manual and follow the instructions that come with it.
How do I make my oven stop beeping?
If an oven chimes or beeps unexpectedly: Turn the unit off. Turn the power to the circuit breaker for the product off for 30 seconds, then turn it back on. Turn the unit back on and see if the beeping persists. If the beeping continues, no further troubleshooting is available and service is needed.
Where is the temperature sensor in my oven?
Your temperature sensor is a probe that extends into your oven on the top left corner of the back interior panel. Reach into your oven along the ceiling, toward the left back corner. You should find it there. If not, check your oven’s manual to find it’s alternate location.
What does F1 mean on Maytag Bravos washer?
The F1 error code indicates that the water level pressure transducer signal is out of range on the machine control board. A pinched or kinked air pressure hose between the bottom of the washer tub and the connection on the machine control board can cause this.
