Table of Contents
How do I fix the E9 on my Hisense dehumidifier?
Error code E9. They don’t bother to put the error codes in the manual, so you have to contact them to get info on the error code. They told me to unplug it, reset it, and plug back in. It cleared the error for a few hours only.
How do I fix E9 error?
For error code E9 or E09 on an Induction Cooktop, turn the home circuit breaker to the unit off for 10 seconds. Turn back on again and then retest the unit operation. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product.
How do I reset my Hisense dehumidifier?
Disconnect the power cord from its electrical outlet and wait five minutes before plugging the dehumidifier back in. The appliance should reset, clearing any settings programmed into the controls. Set the controls and start the dehumidifier as normal.
How do you change the humidity sensor on a Hisense dehumidifier?
Instructions Disconnect power. Unplug the power cord from the wall outlet. Remove the collection bucket. Pull the water collection bucket out of the front of the dehumidifier case. Remove the air filter. Remove the front grille. Remove the back panel. Remove the outer case. Remove the sensor. Install the new sensor.
Why does my Hisense dehumidifier freeze up?
The most common cause of frost and ice buildup on a dehumidifier is because the unit is operating in temperatures that are too cold. There are some models made for cooler basements that operate down to temperatures of 36 degrees. Poor airflow, due to a dirty filter, also can cause freezing of the coils.
What dehumidifiers are being recalled?
Ivation, perfect aire, SuperClima, Whirlpool, and Whynter. The brand name, model number, and pint capacity are printed on the nameplate sticker on the back of the dehumidifier. Click here for images of the recalled products.
What is E9 error?
An E9 error occurs when the printer detects that ink system maintenance is required. An Ink System Maintenance page prints containing instructions to open and close the printhead access door to resolve the error.
What does E9 mean?
E9 means 10^9 (as in scientific notation) – Averroes.
What is E9 error in induction?
E9 Error would mean a user interface control board fault. disconnect the main power and leave for 60 seconds. wire it back up and turn back on and see what happens.(you might have already tried this however this is the basic step).
Are Hisense dehumidifiers any good?
The Hisense dehumidifier works great, especially when running with Ionizer on. Not only keeps the room dry but also help clean the air. The noise is big but not a big deal when it runs in a separate room. The only concern is no easy to pull out water container once it’s full.
How do you reset a dehumidifier?
Try resetting the dehumidifier by disconnecting power to the unit for 30 seconds and re-connecting the power. Then, set the control settings and see if the unit operates properly.
Why is my Hisense dehumidifier not pumping water?
Check to make sure that your drain hose is free from bends and kinks, clogs or other damage that may prevent water from flowing freely. If the drain hose has been routed into a drain, such as a standpipe or down into a standard sink, PLEASE ensure that the hose end is not resting in standing water.
How do I know if my dehumidifier compressor is bad?
Humidity will not reach the set point If the blower in the dehumidifier is running it is possible that the compressor is not operating. Check to see that the indicator light, on the dehumidifier, is confirming that the compressor is operating. If the compressor is not running call a competent HVAC company for service.
How do I clean my Hisense dehumidifier?
Turn off the dehumidifier and unplug the power supply cord. 2. Dust the surface of the unit with a soft cloth or the dusting attachment of your vaccum cleaner. a mild detergent to avoid growth of mold, mildew and bacteria.
What does a humidity sensor do on a dehumidifier?
While not all dehumidifiers have a sensor, some have a humidity sensor that helps adapt the dehumidifier to maintain the set relative humidity point. If the sensor gets dirty or cloudy, sensor effectiveness will be reduced. Troubleshooting the sensor can often help avoid this problem.
How long should dehumidifier last?
Maintain Your Appliance The lifetime of dehumidifiers usually ranges from five to 10 years. To maximize the lifetime, it’s important to care for your dehumidifier. Be sure to regularly change the air filters, clean the condensing coils and exhaust grilles, and empty and clean the water bucket.
How do I clean the coils on my dehumidifier?
Gently vacuum off the top layer of dust and grime or scrape it off with your hand. Use a soft-bristled brush or cloth to clean the coils with a spray detergent or mixture of vinegar and water. Rinse off any residue. Make sure you let the coils completely dry before using your dehumidifier again.
Should my dehumidifier has ice on the coils?
A Warning. If your dehumidifier keeps icing up don’t use it! If you continue to operate your dehumidifier while the coils are frosted, you could damage it even further. The motor or compressor unit will be forced to work harder and could get overwhelmed or even burn out.
