Table of Contents
Coagulation destabilises the particles’ charges. Coagulants with charges opposite to those of the suspended solids are added to the water to neutralise the negative charges on dispersed non-settable solids such as clay and organic substances.
How does coagulation work water?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
What happens when coagulant is added to water?
Once added to water, the inorganic coagulants form aluminium or iron precipitates. These absorb impurities in the water as they fall, serving to clean the water. This process is known as the ‘sweep-floc’ mechanism.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
Which are two chemicals used to purify water?
Both chlorine and chloramines work to kill bacteria and other harmful substances that may be found in drinking water sources.
What are the 5 stages of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What is egg coagulation?
Coagulation indicates a change from a fluid to a solid or semisolid (gel) state. The success of many cooked foods depends on the coagulative properties of proteins, particularly the irreversible coagulative properties of egg proteins. Egg proteins denature and coagulate over a wide temperature range.
Is coagulation good or bad?
Blood clotting is a natural process; without it, you would be at risk of bleeding to death from a simple cut. Blood clots inside the cardiovascular system are not always so welcome. A clot in the coronary arteries near the heart can cause a heart attack; one in the brain or the arteries serving it, a stroke.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
What are the 3 stages of blood clotting?
Hemostasis includes three steps that occur in a rapid sequence: (1) vascular spasm, or vasoconstriction, a brief and intense contraction of blood vessels; (2) formation of a platelet plug; and (3) blood clotting or coagulation, which reinforces the platelet plug with fibrin mesh that acts as a glue to hold the clot
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is an example of coagulation?
Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.
What are the chemicals used for coagulation?
The main chemicals used for coagulation are aluminium sulphate (alum), polyaluminium chloride (also known as PAC or liquid alum), alum potash, and iron salts (ferric sulphate or ferric chloride).
Which is the most common way to purify drinking water?
1. Boiling. The simplest and most common method to purify drinking water is to boil it. Heat the water over a stovetop burner or open flame until it reaches a full, rolling boil, and continue to boil for a minimum of five to ten minutes to be safe (the longer the water is boiled, the purer it will become).
What does coagulation remove from water?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
How is water treated?
Coagulation and flocculation are often the first steps in water treatment. Chemicals with a positive charge are added to the water. The positive charge of these chemicals neutralizes the negative charge of dirt and other dissolved particles in the water.
What is the function of coagulant during water treatment?
In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What happens during coagulation?
Blood clots and coagulation Blood vessels shrink so that less blood will leak out. Tiny cells in the blood called platelets stick together around the wound to patch the leak. Blood proteins and platelets come together and form what is known as a fibrin clot. The clot acts like a mesh to stop the bleeding.
What are the 4 steps of coagulation?
1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
What are the common coagulants used?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What is the difference between denaturation and coagulation?
The key difference between denaturation and coagulation is that the denaturation is the changing of the properties of a molecule while the coagulation is the action of converting the liquid state molecules into the solid or semi-solid state by sticking molecules together.
