Table of Contents
As you start shopping for a new air conditioner, chances are you’ll come across the acronym BTU. And that means what, exactly? BTU is short for British Thermal Unit, a unit of measurement that shows just how much energy your air conditioner uses to remove heat from your home within an hour.
How many BTU air conditioner do I need?
As a rule of thumb, an air conditioner needs 20 Btu for each square foot of living space. But other considerations, such as the ceiling height and the size of your windows and doorways, might call for more cooling power. To measure your room, multiply the length by the width.
Is the higher the BTU better or worse?
A heater with a higher BTU rating is more powerful — that is, it has a higher heat output — than one with a low BTU rating. It can do more to raise the temperature in your room each hour, so you can either heat a room more quickly or heat a larger space.
Is higher BTU better for AC?
A measure of an air conditioner’s power is its BTU rating. BTUs are the energy used to remove heat from a room. Therefore, the more BTUs an air conditioner unit has, the better equipped it is to cool a larger space.
How big of a room will 12000 BTU air conditioner cool?
The size of your space determines how much cooling capacity you need. Budget air conditioners range from 5,000 BTU, which can handle about 150 square feet, to 12,000 BTU, enough to cover about 550 square feet.
Is 8000 BTU enough for a bedroom?
Recommended BTU By Room Size If you are looking for an air conditioner for a room measuring say 10′ x 15′ (150 square feet), the recommended BTU range is up to 5400. Once you get into 340 and 400 square feet per room, you’d need an 8,000 or 9,000 BTU air conditioner, respectively.
What size air conditioner do I need for a 2000 square foot home?
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
What happens if you have too much BTU?
A unit with too many BTU’s, will cool the room fast, but leave the room humid. Too few BTU’s will never cool the room down and the unit will run incessantly.
What happens if BTU is too high?
If the BTU is too high, your room will cool too quickly and that can cause the air conditioner to cycle more often. That places a considerable amount of load on the compressor and can shorten the lifespan of the air conditioning unit.
What happens if an air conditioner is too large?
An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. As a result, you could end up with a number of hot or cold spots throughout your home.
Can Window AC cool entire house?
Window air conditioners are designed to cool only a single room. It is very difficult for such AC to cool an entire house. At most you can cool two adjacently connected tiny rooms with a single window AC, but there will be uneven cooling.
How many BTU do I need for a 12×12 room?
If you want to properly cool down a 300 square foot area (or room), you need a 6,000 BTU air conditioner. Obviously, the problem arises when you have a tiny 12×12 room, for example. According to the US Department of Energy directive, an air conditioner’s most appropriate size would be 2,880 BTU unit.
Is 6000 BTU enough for a living room?
Consumer Reports recommends 20 BTUs per square foot of the living space (or spaces) you want to cool down. 150 – 250 sq. feet: 6,000 BTUs.
What size aircon do I need?
As a general rule we advise you to buy an Air Conditioner with a minimum 7000BTUs as this is the minimum required to call a small room (18sq/m) on a hot day. Medium rooms (24sq/m) need around 10,000BTUs and larger rooms and office spaces (36sq/m) require around 15000BTUs.
Is 9000 BTU enough for a bedroom?
Match the BTU rating to the room size Small rooms (150 square feet or below) will require a unit with around 6,000 BTUs. This is generally appropriate for a single bedroom. For larger rooms (up to 350 square feet), you will need a unit with around 9,000 BTUs. This is typical for most living rooms.
What size air conditioner do I need for a 2400 square foot home?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.
Does higher BTU mean more electricity?
The more BTU your unit produces, the more energy it consumes. So, if you are worried about high energy costs, you should get a unit that is appropriate for your space.
What size room will a 10000 BTU air conditioner cool?
10,000 BTUs will cover 300 sq. ft. (2,400 cubic feet) 12,000 BTUs will cover 400 sq.
How many BTUs do I need to cool my house?
Size and Ceiling Height Area To Be Cooled (square feet) Capacity Needed (BTUs per hour) 450 to 550 12,000 550 to 700 14,000 700 to 1,000 18,000 1,000 to 1,200 21,000.
