Table of Contents
Anti-dither is the amount of delay that will occur before the DVR starts recording, it can also be thought of as the amount of time something in the image has to be there to trigger the DVR to record.
What does anti-dither do?
Anti-dither, Latch, and Post Record are used to specify how the system behaves when a motion event is detected. Anti-dither: After an initial motion event is detected, the system will continue to record video if a second motion event occurs within the set Anti-dither period.
How do you set anti-dither?
To configure anti-dither, latch, and post record settings: Right-click on the Live View to access the Quick Menu. Click Main Menu and then click the Setting icon ( ). Click Alarm > Motion or Event > Motion and then the Motion Detect tab, depending on your recorder.
What is anti-dither Dahua?
The anti-dither time refers to the alarm signal lasts time. It can be seem as the alarm signal activation stays such as the buzzer, tour, PTZ activation, snapshot, channel record. During the alarm process, the alarm signal can begin an anti-dither time if system detects the local alarm again.
How do I adjust the sensitivity on my Lorex camera?
To adjust threshold or sensitivity: Right-click on the Live View to access the Quick Menu toolbar. Click Main Menu and then click the Setting icon ( ). Click Event > Motion. Click the Motion Detect tab. Click Channel and select the camera to be configured.
What is anti dither?
Anti-dither is the amount of delay that will occur before the DVR starts recording, it can also be thought of as the amount of time something in the image has to be there to trigger the DVR to record.
What does Cam masking mean?
Privacy Masking is a feature on some security cameras that allows you to blur or completely block certain areas seen on the cctv monitor within the field of view of the camera.
What does IPC offline mean?
IPC disconnect indicates that the camera is out of the range or not powered on.
What is record delay?
Record Delay: This field specifies in seconds how long the delay between alarm activation and recording should be. Send Email: This checkbox allows the user to enable the camera to send an email when motion occurs. Snapshot: This checkbox allows the user to enable the camera to take a snapshot when motion occurs.
What is video tampering hikvision?
Video tampering is a feature that allows you to detect and recognize if the camera is covered or obstructed by someone’s hand or by an object.
What is Dahua IVS?
It is used to detect the level of motion of moving objects in a certain time. Supports the statistics of the cumulative population density within the set time range, and displays in space with different colors.
What is motion detection recording?
Motion detected recording is a feature on all our DVR recorders. The DVR monitors camera images and decides when it thinks there is movement. To do this the DVR looks at individual image frames and compares them to the previous one. If it sees differences then motion is assumed to have taken place.
What is pack duration?
Pack Duration: it means that each recording file will be 5 minutes. The users could adjust the length of the recordings files manually. Audio: the camera will record audio for the video if it is turned on.
How do you adjust Lorex sensitivity?
To change Motion Sensitivity Launch the Lorex Home app. Tap icon above the channel thumbnail on the Devices screen. Tap Motion Detection Settings. Tap Motion Sensitivity. Tap and select the level of Motion Sensitivity, then tap Save.
What does C and M mean on Lorex camera?
A: Hello, The DVR can be set up for continuous recording, and an indicator symbol will be displayed next to a “C” on each of the channels to indicate that they are recording. Thanks, Lorex.
How do you stop bugs from triggering motion cameras?
Keep Your Security Cameras Bug-Free Apply lubricants to the outside case of your camera. Attach a dryer sheet to the camera. Disable the LED lights. Loop a flea collar around your camera. Spray bug repellent around cameras. Sweep camera areas weekly. Use a fan to prevent spider webs.
What is Cam masking Amcrest?
Privacy masking is a feature found in many IP cameras which is used to protect personal privacy by concealing parts of the image from view with a masked area. Examples of this would be masking windows of domestic properties or license plates which are not subject to surveillance.
What is Amcrest record delay?
If you check the record box, then you must enter a record delay value which has a minimum value of 10 seconds. This means that after the recording stops, then the camera will not record again (even if there is another motion detection trigger) for 10 seconds.
What is video tamper Amcrest?
Tamper detection is a setting within your IP camera that will send you an alert when the camera is tampered with. Once an action has been detected, whether it’s someone trying to knock the camera down or blocking its view, the alert lets you know to log into your video management system to see what happened.
What is a privacy mask?
Privacy masking is a feature found in many IP cameras which is used to protect personal privacy by concealing parts of the image from view with a masked area. This mask will continue to cover sensitive areas of the image whenever users view the camera.
What is alarm masking?
Alarm masking means that the NMS does not receive alarms from a specified object or monitor some unimportant NMS alarms. During maintenance, testing, or deployment, you can set alarm masking conditions to mask alarms that do not need concern.
What is video blind on CCTV?
A blind spot refers to an area that isn’t in the peripheral vision of the CCTV camera. Since all cameras have limited range, every security camera will have a blind spot. In order to cover as much ground as possible, each camera’s view must overlap with the blind spot of the camera located closest to it.
