Table of Contents
ACX plywood is a high-grade plywood made not from a species of tree but from veneers, which are thin sheets of peeled wood grain. The ‘A’ in ACX plywood refers to the side of the wood that is considered the ‘front’ — and that can sometimes be sanded — while the ‘C’ designates the ‘back’ face.
What is the difference between ACX plywood and CDX?
Since ACX plywood is a higher grade material than say CDX plywood, it is specifically used in cases that require good appearance or a smooth finish, along with durability. Because this plywood is more expensive than other grades of softwood plywood, it is only used where needed, not in all situations.
How long will ACX plywood last outside?
Plywood is characterized by great durability, but how long exactly a plywood will last outside depends on several factors. Usually, the average life expectancy of exterior plywood constructions is around 35 years if everything is finished properly, but sometimes it can also reach up to 50 years.
Is ACX plywood exterior rated?
The C in ACX represents the back face, which may be considerably rougher with visible seams, patches and voids. The X in ACX represents the exterior rating, which, as previously mentioned, indicates the use of exterior rated waterproof adhesives in the manufacture of the plywood.
What is difference between ACX and BCX plywood?
ACX plywood is a variation on BCX. While both can be used in the same manner, the better face veneer of ACX plywood makes it ideal for visible exterior panels on a home. It uses the same rosin and surface treatment against moisture as BCX plywood, allowing you some time before painting the wood.
What is the difference between CDX and BCX plywood?
BCX plywood, you can usually see a significant difference in quality. CDX plywood is going to have a lower quality veneer on the face of the plywood, as well as a much rougher texture on the back. As you might imagine, plywood with lower scores like this will typically be less expensive.
Can I use ACX plywood as underlayment?
The 3/4″ plywood will be so stiff it won’t flex and won’t squeak. (However, glue and nail it down anyway.) And 2) The A-C designation indicates the A side is patched so it’s smooth (and maybe even touch-sanded.) This is used as an underlayment, where the finish floor is to be installed directly to it.
What type of wood is ACX?
ACX is constructed of a very high grade plywood. It is not made from a species of wood or tree, but rather from veneers, which are layered together with each layer’s grain perpendicular to the surrounding two layers.
Is ACX plywood structural?
It is suitable for a variety of uses, including decorative sheathing, furniture, shelving, cabinetry, flooring and other industrial and building applications. Selex ACX Sanded Pine Plywood Panels are TECO certified for structural use and building code compliance and come from sustainable, certified forest plantations.
What plywood is best for outdoor use?
Exterior plywood is weather (and water) resistant, so it’s strong enough to be used outside and also in areas that are exposed to water and humidity, like a garage. This type of plywood, often made from Douglas fir, is made stronger by adhering its layers with a waterproof glue.
Does Home Depot sell ACX plywood?
ACX Sanded Hi-Bor Pressure-Treated Plywood 95355 – The Home Depot.
What plywood is water resistant?
BWP Grade Plywood This is “boiling waterproof” plywood, and it’s also referred to as Marine plywood. It is completely waterproof.
What is Plytanium wood?
Plytanium is a trade name, registered to Georgia Pacific, the nation’s largest manufacturer of plywood products. It is their premium softwood plywood product and although not rated as such, it should probably be considered an ACX rated plywood.
Is ACX plywood fire rated?
AC Grade Plywood can be used for interior and exterior applications and has great exposure durability with its moisture resistant qualities.
What is CDX plywood used for?
CDX Plywood is used primarily by contractors to build exterior walls and roofs. CDX plywood has one side veneer grade “C” and one side veneer grade “D”. The two are bonded together with glue which can withstand a little moisture. The APA would recognize CDX Grade Plywood as C-D Exposure 1 plywood.
Is ACX plywood waterproof?
ACX plywood is also extremely weather-resistant. The ‘X’ in ‘ACX’ refers to a waterproof glue that makes this type of wood less prone to damage from adverse weather conditions like rain. Like most plywoods, it is also eco-friendly because it uses less wood than solid wood products, so timber is conserved.
What are the 3 types of plywood?
Although specialty plywood can have any number of plies above three, most plywood is categorized as 3-ply, 5-ply or multi-ply. 3-ply is one of the most common types of plywood. It is about 2- to 3-millimeters thick and is generally used indoors, since it looks more decorative than thicker plywood boards.
Is ACX plywood pressure treated?
ACX Borate-Treated Fir Plywood is sanded and paintable. This plywood is made of Fir wood and is pressure-treated.
What does RTD mean on plywood?
They actually stand for the phrase “Resistance Temperature Detector”. This detector is a key piece in the development of RTD plywood. It provides a reading of the temperatures during the bonding process of each layer on this sheet of plywood.
What is marine grade plywood?
Marine Grade Plywood is an exterior structural panel, sanded on both sides, most commonly made from Douglas fir or Pine. Other species of hardwood may also be used for marine plywood, usually in the Marine (boating) industry.
Is BCX plywood good for roofing?
Only use CDX plywood for the interior of a house, where water damage is far less likely. Do not use CDX for roofing, sheds, or other places that are exposed to moisture consistently. The sole exception to this is pressure treated CDX, which can survive for decades without even a protective coating.
