Table of Contents
vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
What is a vise used for?
A vise, sometimes called the third hand, is an indispensable tool in the tool room or workshop. Vises are usually mounted on workbenches or similar firm supports to hold material in place.
Why do I need a vise?
A vise is simply a tool used to secure an object while you work on it. Vises are used in metalworking, woodworking, electronics, model-making, and in any situation that requires keeping your hands a safe distance away from the workpiece, or when you need both hands to work on it.
What is the purpose of a bench vise?
What is a bench vise? To state in simple terms, a bench vise is a mechanical apparatus used to secure an object that is to be worked on. It features two parallel jaws as part of the design. The device is widely used in the mechanical and woodworking industries, among others.
How do vices work?
A vice has two parallel jaws which work together to firmly clamp an object and hold it in place. A threaded screw, which is connected to the jaws, runs through the body of the vice, and its movement is controlled by a handle, which is located on the outer end of a vice.
What do you do with a bench vise?
You might have heard people often refer to bench vices as engineer’s vices or woodworking vices. These are either made of metal or wood and can be used for planning, drilling, and sawing wood pieces. With the help of this tool, you can hold the wood piece or object underneath and work on it with a proper grip.
Is a tail vise necessary?
The main reason why a traditional tail vise is so darn useful is because of the unobstructed gap you get in the front of your bench. this gives you the perfect way to solidly clamp chair legs, or any long part that needs to be held while you work on it from one end.
Does foot planing stop?
If you prefer to work in a more rudimentary way, a planing stop accompanied by holdfasts and a doe’s foot (see fig. 17 from Roubo’s Plate 14) can give you excellent workholding. However, if you use routers, the doe’s foot/planing stop combo is not useful.
Do you need a woodworking vise?
A workbench is only a success if it can keep itself still and provide means to hold your work. A woodworking vice is not an essential feature of this. Typically though we can expect to see two vices on a workbench today.
What is pipe vise?
Definition of pipe vise : a vise shaped to hold pipe for threading, cutting, or reaming.
What is yoke vise?
Yoke vises are made of ductile or malleable iron and have hardened, high carbon steel jaws for toughness and long life. These yoke vises easily convert from right- to left-hand operation and back, making it simple to work around obstructions or to accommodate right- or left-hand user preference.
Does Footworking do wood?
The doe’s foot is simply a piece of wood of almost any size with a 90° notch cut into its end. The device works by allowing your workpiece to get snagged in the notch between the two “toes” of the foot, immobilizing it. The doe’s foot can be used both in front of the work or behind the work.
What is a stop woodworking?
A stop block is a simple reusable jig used in metalworking and woodworking to locate a common edge of a workpiece so that multiple workpieces can get the same operation performed quickly.
What is a shoulder vise?
Unlike the other vises, a shoulder vise has no vise mechanisms to interfere with holding the work piece. Additionally, a shoulder vise, because of its horizontally pivoting jaw, can securely grip wood with non-parallel faces.
How strong is a vise?
Cast iron bench vises can have a tensile strength of over 60,000 PSI, making them incredibly strong. PSI ratings of 30,000 or more are sufficient for most workshop projects. It’s also important to note that most of the best bench vises have replaceable jaws.
What is a face vice?
A face vise is the standard woodworking vise, always securely attached to a workbench flush with its work surface. Its jaws are made of wood or metal, the latter usually faced with wood, called cheeks, to avoid marring the work. The movable jaw may include a retractable dog to hold work against a bench dog.
What is leg vice?
Leg Vice. The Blacksmiths’ Leg Vice (aka Post Vice) firmly holds hot iron while it is hammered, chiseled or twisted. A normal Engineers Vice may shatter after such treatment because of the brittle nature of Cast iron from which they are made – although Malleable Iron is more resistant. Compare.
Which vice is used in plumbing?
1. Pipe Vice: ( Types of Vices ) The pipe vice is used in the plumbing work to hold the pipes in the vice to secure the tubing when cutting or threading is done. It is designed to hold the vice pipes which are as small as 3mm or as large as 200 mm.
