Table of Contents
A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.
How does a drain snake work?
Steps for using a drain auger Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. Keep pushing more of the snake into the drain until you feel resistance. Rotate the snake against the blockage until you feel it feed freely into the pipe.
Are drain snakes good?
These are essential tools in any professional plumber’s kit, and often, home DIY enthusiasts can use them too. There’s nothing worse than clogged drains, for so many reasons – water stains, leaks, warping, pipe damage, and flooding in your home – so sorting them out should be a top priority.
What’s the difference between a drain snake and an auger?
Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.
Can drain snakes damage pipes?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
Can’t get the snake down the drain?
Too much force – When you’re trying to dislodge a blockage, it can be tempting to try and force a snake cable through the drain too fast. If you force it, sometimes the cable can bend back on itself or kink. Instead of forcing the cable, extend the snake cable a few inches at a time until you reach the clog.
How do you clean a drained snake after use?
With a high-bristle wire pipe brush, poke through the plumbing snake’s crevices, dislodging any remaining particulate that the scrubbing brush was unable to reach. Then, run the plumbing snake through clean water to ensure that the coil is clean. Wipe it down with a rag and leave it out to dry completely.
Can Drano dissolve hair?
Drano® Clog Removers can unclog a drain fast. They contain ingredients chemicals that quickly dissolve hair, soap scum and gunk. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
What kind of snake do plumbers use?
A standard household drain snake, sometimes called a drum snake or top snake, is the smallest of the drain-clearing augers. It is primarily used for clogs in tubs, showers, bathroom sinks, washing machines, and sometimes kitchens sinks. Most have a 25- or 50-foot cable with a corkscrew tip for snagging debris.
How do you remove a sink drain?
Steps for Removing a Sink Drain Shut off the water. Before you remove your sink drain, you will want to shut off the water. Disconnect the water supply line. Remove the P-trap. Remove the pop-up sink drain. Remove the tailpiece. Remove clips and cut away sealant. Remove sink. Disconnect the backsplash.
What does a plumber snake look like?
A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.
Can snake come through toilet?
Yes, but it’s not common. Sometimes snakes will swim up through the pipes or enter a bathroom through an open window or door and coil up in a toilet bowl in search of a place to cool down during the hot, dry summers. However, this doesn’t really happen in urban areas.
What kind of snake will unclog a toilet?
To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.
Can a drain snake break a PVC pipe?
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
How long does it take to snake a drain?
How Long Does It Take To Snake A Drain? Plumbers take about five minutes to snake a drain for clogs located near the tub, toilet, or sink. Main line sewer clogs can take hours to snake, depending on the length and number of pipes affected.
