Table of Contents
Setting 1 is low speed/high torque and is best for driving screws. Setting 2 is a medium speed/torque and can be used for drilling or driving. The higher the number on the collar, the higher the torque and the larger the fastener that can be driven.
What do numbers on a drill mean?
The numbers on a drill driver refer to the amount of torque the drill will apply to a fastener (usually a screw) and once that torque setting is reached, the drill will stop turning/driving the fastener.
What is the 1 2 Switch on drill?
The numbers 1 and 2 on top the drill indicate the speed at what the chuck will spin. 1 is a low speed with high torque, this setting is best used for driving screws. 2 equals high speed and low/medium torque, which is best for drilling and driving some fixtures.
What is the torque setting on a drill?
Most of understand speed, it’s how fast the drill rotates the bit. The torque is how much muscle it can apply to that speed. Speed is required to drive the screw, but torque is what allows it to keep going when it needs to fight the stopping force of friction.
What are the numbers on my cordless drill?
The numbers on a cordless drill indicate the torque breaking point or rotary power. The higher the number, the greater the force or torque. This feature is very useful. We’ll explain how to adjust the torque or clutch settings on a drill and what the hammer settings on a cordless drill do.
What is a good torque for cordless drill?
Newton Metres (Nm) on drills: 4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.
What is the switch on top of drill?
A switch on the top of the drill lets you set the drill for high or low speeds. High speed is for lighter tasks, like drilling small holes. Low speed is used when more power and torque is needed, like driving screws.
What is the 1 2 switch on Ryobi drill?
1 is for low speed. It’s typically used when your material or application requires higher power and torque. 2 or high speed is used when fast drilling or driving.
What is hammer drill used for?
A hammer drill delivers more power in the form of a hammering action. The force of the hammer drill is applied directly to the bit. They are most commonly used for drilling in concrete and masonry. The hammering portion of this motion can be turned off, allowing the tool to function more like a standard drill.
How much torque does a Dewalt drill have?
One drill is rated at 400 in-lbs max and with 0-400/0-1500 RPM speed settings, and another at 380 in-lbs max torque, with 0-550/0-2000 RPM speed settings.
How much torque does a Dewalt 20V drill have?
impact driver, two 20V MAX* lithium ion batteries, charger, and carrying bag. At only 5.1 in. front to back, the impact driver features a high-performance brushless motor that delivers 1700 in-lbs of torque and 3 LEDs for optimum illumination as you work.
What is the clutch on a drill?
These days, manufacturers provide a clutch on cordless drill/drivers with numeric settings on the collar. Its purpose is to disengage the transmission at a range of torque thresholds to prevent overdriving screws in delicate surfaces such as drywall, or damaging small or fragile screws.
What size is a number 1 drill bit?
Downloadable versions: Drill size Diameter (in) Diameter (mm) #63 0.0370 0.9398 #62 0.0380 0.9652 #61 0.0390 0.9906 1 mm 0.0394 1.0000.
How do you read a DeWALT model number?
The model number is usually found at the top left part of the name plate. In this case the model number is DW938. When DeWALT comes out with the first version of a tool, it is usually a Type 0 or a Type 1. (Occasionally the first version will not have a type, but this is rare.).
What are the parts of a drill?
Parts of a Drill (Explained with Pictures) Power Source. Naturally, every drill will have a power source. Chuck. The chuck is where you insert and fasten your drill bit. Trigger. The trigger is what will activate the drill. Reverse Switch. The Drill Shaft. The Drill Bit.
How do I choose my drill speed?
Quick Summary: Some approximate starting advice is to set the spindle speed between 700-1000 rpms for steel, above 2000 for aluminum, and slow down from there if you get discolored chips or heavy drill bit wear.
How do you choose a drill torque?
How to Set the Torque Setting on a Drill Find the arrow on the top of the drill and the numbers on the torque adjustment ring. Rotate the torque ring between numbers 1 through 4 if you are driving in small screws. Turn the torque ring between numbers 5 through 8 settings, if you are driving screws through soft woods.
Are cordless drills worth it?
A cordless drill is the most essential power tool you’ll buy. It’s the one you’ll rely on for big projects, such as building a deck and remodeling a kitchen, and for smaller tasks, like installing fixtures and assembling furniture. You might even need your drill to service other tools.
What does HSS stand for on a drill?
High-Speed Steel (HSS) is a popular material good for drilling into soft steels as well as wood and plastic.
How many parts are in a drill?
Major components include a base, column (or pillar), adjustable table, spindle, chuck, and drill head, usually driven by an electric motor. The head typically has a set of three handles radiating from a central hub that are turned to move the spindle and chuck vertically.
