Table of Contents
Although drill presses are used mainly for drilling holes, they can also be used for enlarging holes with a boring tool or finishing holes with a reamer. With the aid of a special tapping attachment and a tap, they can produce threads in a hole. See also boring machine.
What projects can you do with a drill press?
A drill press is an integral woodworking machine that can be used for a number of tasks. Of course, a drill press can be used for drilling, but it can also be fitted with a mortising attachment for drilling square holes, used as a spindle sander, and more.
Is it worth buying a drill press?
With a drill press, you move the wood piece and drill. It’s faster and more accurate. When you do need to drill at an angle, the drill press is still a better option. If you try to drill by hand at an angle, there’s more than a decent chance you’ll slip at least some and get imperfect results.
When should you use a drill press instead of a hand drill?
If you have light, one-off drilling work to be done, then a hand drill should serve the purpose. On the other hand, if you have some severe projects using various materials, you would probably be better off with a drill press.
What can you not do with a drill press?
What are some things you should avoid doing? Do not wear any loose clothing or ties. Do not wear gloves, rings, watches, or bracelets while working with a drill press. Do not set speeds, adjust, or measure work until the machine is completely stopped. Do not force the drill with extra pressure.
How do you use a drill press safely?
Drill Press Safety Rules Run drill at correct RPM for diameter of drill bit and material. Always hold work in a vise or clamp to the drill table. Use a correctly ground drill bit for the material being drilled. Use the proper cutting fluid for the material being drilled. Remove chips with a brush, never by hand.
What does 8 inch drill press mean?
The size of a drill press is measured in terms of “swing,” which is defined as twice the throat distance (the distance from the center of the spindle to the closest edge of the column or post). For example, a 16-inch drill press will have an 8-inch throat distance.
How much HP does a drill press have?
Standard benchtop drill presses range from 1/3- to 3/4-horsepower models. Either will do for most workshop-based projects. If a drill press starts to bog down, it means you’re putting too much pressure on the bit. This is bad for the bit, the chuck, and the spindle, so lighten up.
Should you wear gloves while operating a drill press?
Do not wear gloves, rings, watches, or bracelets while working with a drill press. Do not set speeds, adjust, or measure work until machine is completely stopped. Do not force the drill with extra pressure.
Why is a drill press better than a drill?
Unlike handheld drills which rely on arm strength and the steadiness of the operator to drill an accurate, clean hole, drill presses are precise by design. This makes perfectly precise holes much easier to create. All models have a depth stop, for creating holes of consistent depth.
What are the different types of drill press?
Different Types of Drill Presses Portable Drilling Machine. Sensitive Drilling Machine. Upright Drilling Machine. Radial Drilling Machine. Gang Drilling Machine. Multiple Spindle Drilling Machine. Automatic Drilling Machine. Deep Hole Drilling Machine.
Can you use a drill press as a router?
By speeding up the drill press, you can use it as an overhead router. Most drill press machines have alternate belt configurations that allow them to run faster, enabling you to use them as an overhead router for some applications.
What are 10 things you should avoid doing when using a drill press?
What are some things you should avoid doing? Do not wear any loose clothing or ties. Do not wear gloves, rings, watches, or bracelets while working with a drill press. Do not set speeds, adjust, or measure work until machine is completely stopped. Do not force the drill with extra pressure.
Where do you stand when using a drill press?
The rotation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable, braced against the supporting column at the rear of the machine, or otherwise secured. Never operate the tool without firmly anchoring the workpiece.
What should you never leave in the chuck of a drill press?
Never leave chuck key in press. It should only be on the chuck when power is off and you are changing a bit. Always follow 4 inch rule. Never force the bit.
Do drill presses need to be guarded?
This standard does apply to drill presses and lathes, and it is the Occupational Safety and Health Administration’s (OSHA) policy to require protection for employees by guarding methods such as barrier guards. Thank you for your interest in occupational safety and health.
What three operations on the drill press can be performed?
The chief operation performed on the drill press is drilling, but other possible operations include: reaming, countersinking, counterboring, and tapping.
What is the difference between 8 and 10 drill press?
Yes, with the 8 inch drill press there is exactly 4 inches from support column to the center of the chuck and hence 5 inches with the 10 inch drill press. 4 of 4 found this helpful. Therefore, the unit can reach the middle of a 12-inch piece of material.
How do you measure a chuck on a drill press?
How to Size Chuck Keys Look closely at the chuck on the drill for the engraved numbers. The chuck size looks something like: 1/4, 3/8, 1/2 etc. Measure the diameter of the hole on the side of the chuck in inches with a ruler. Take these two dimensions to your local hardware store to make your selection.
