Table of Contents
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! A tote to hold water (size depends on size of object dipping) 2X Rust-Oleum Spray Paint and Primer. Your choice of what to Hydro Dip. Latex gloves. Paint stirring stick.
What materials do you need to Hydro dip?
Step-By-Step Guide to Hydro Dipping Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete) DIY complete hydrographic printing kit. Object to be dipped. Sandpaper to smooth the surface. Rags. Bucket of mild cleaning solution and water. Vinyl, rubber, or latex gloves.
Do you need activator to Hydro dip with spray paint?
Not Using an Activator (or using too much) If you’re using hydro graphics in order to hydro dip it’s important to note that you need to spray on some activator in order to thin out the paint and make it ready for dipping.
Do you need a base coat for hydro dipping?
Choosing the right base coat color is very important in hydro dipping. So if you are wanting the design to look as intended and usually shown on the product page of where you are purchasing the film, then using a white base coat is usually the best choice unless it is specified that another color was used in the photo.
What primer do you use for hydro dipping?
Any paint requires a good primer to stick to, and a clear coat to seal the paint in after and offer ultimate protection. Rust-Oleum Painter’s Touch Flat White Primer is the go-to for hydro dipping.
What is a hydro dip activator?
The activator is a chemical that liquefies the ink on the hydro dip film. The film is carefully placed on the water surface of a dipping tank. Once the film is hydrated, you add the activator. This liquefies the ink on the surface of the water.
Do You Use warm or cold water for hydro dipping?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit. Some dip manufacturers may recommend a specific temperature, such as 80 degrees.
Do you let the primer dry before hydro dipping?
Apply a very light dust coat and leave to dry for 15 minutes. Sand, clean and paint your item in an appropriate primer, and base coat prior to . The base coat is a big part of some hydro dipping patterns as they have a lot of clear parts in and it affects the hue of the finish on solid colour patterns.
How long should base coat dry before hydro dipping?
Most manufacturers of hydrographic dipping film recommend that you wait for a minimum of 20 minutes to eight hours after the painting step to do the dipping step. That’s because the paint needs to be a little soft in order for the hydrographic film to adhere to the item but hard enough to be handled.
How long does Hydro dip take to dry?
Step 2: Paint the Base Coat The lightest color (in our case the white) will be your base coat. Be sure to avoid any fingerprints for a smooth finish, and avoid spraying the concrete at school to keep everyone happy in the process. After a full base coat is applied, it will take about 24 hours for the paint to dry.
Can I hydro dip at home?
While there are many companies specializing in hydro dip art for large items (e.g. cars and sports equipment), it’s possible to do the process on your own and be creative. Purchase a home hydro dip kit online to apply a design of your choice, with minimal equipment or experience.
What clear coat do you use for hydro dipping?
TWN’s clear coats are specifically designed for hydrographics. No matter your project or application, we have a clear coat with the unique characteristics that you need to create a long-lasting finish. CCI clear coats are the ultimate clear coat for sporting goods items.
Can you use any spray paint for hydro dipping?
Hydro Dipping is where paint resting on the surface of water is then transferred onto an object through dipping. To hydro dip at home, all you need is acrylic spray paint and a large bath of water.
How do you Hydro dip with acrylic paint?
Here there are: Mix water and borax in a 1:3 ratio in the tray. Choose acrylic colors and in separate ramekins. Take a paintbrush, dip into a color, and tap the handle on your palm about an inch away from the water. You can also gently dip the brush into the water and let the paint float away from the brush..
What kind of paint do you use to hydro dip?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Do you clear coat after hydro dipping?
STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
Is Hydro dip permanent?
Hydrographics, otherwise known as Hydro dipping, is paint based printing process. Once your item is painted and hydro dipped, they are protected with an automotive grade clear coat, whilst this is a permanent change, if you ever did change your mind, you could simply paint over it.
How expensive is hydro dipping?
Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.
Can you Hydro dip in a bathtub?
You can camouflage your entire rifle by dunking it in your bathtub, using a process known as hydrographics. One side of the film is water soluble, and the film is placed in a tub of water with that side down.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
How do I protect my hydro dipped wheels?
If Your Hydro Dipping Is DIY You’ll want to be sure to finish the objects with a clear coat. Kits are available that include a clear coat that promises scratch resistance under normal circumstances.
What paint to use on skulls?
Acrylic Paint This is one of the best ways to cover up a skull that has been damaged or discolored.
