Table of Contents
What do I do if my pilot light keeps going out? Find the gas shut-off knob and turn to the “Off” setting. Remove the access panel to access the burner. Turn the knob to “Pilot” to start the flow of gas. While still holding the gas knob, light the pilot with a long lighter.
Do I need to turn gas off if pilot light goes out?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
What would cause a pilot light to go out?
Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
How do I get my pilot light back on?
Turn the valve to the “pilot” position. Press and hold the reset button. If the reset button fails, ignite the lighter. Hold down the reset button and bring a grill lighter or long match to the pilot light valve until the pilot ignites.
Is it an emergency if the pilot light goes out?
Having the pilot light turn off is not automatically cause for panic. If it goes out, follow your manufacturer’s instructions and determine whether relighting it is safe. If relighting is not safe, or if your pilot light keeps going out, call for help from a trained technician.
Will the gas company light My pilot?
Most of today’s gas appliances have electric starters, rather than pilot lights. One caveat, however: If you detect the strong smell of natural gas, do not attempt to light the pilot. Instead, leave the house and call your local gas company or 911.
Can a pilot light relight itself?
Relighting a pilot light may be possible, depending on the type you have. By design, an automatic pilot light does not need to be lighted or relighted; it turns on and off by itself. If an automatic pilot or igniter is failing to light the burners on your appliance, it typically needs to be replaced.
How much does it cost to fix a pilot light?
The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.
What are the symptoms of a bad thermocouple?
Failed Thermocouple Symptoms The first is signs of contamination on the tube, which can include discoloration, cracks, or pinholes. Next, check the wiring for any signs of wear or corrosion like missing insulation or bare wire.
How much does it cost to replace a thermocouple?
It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on. It will shut the gas off if it’s not.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Can you get carbon monoxide poisoning from a pilot light?
A pilot light should be a crisp blue colour. A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.
How do I know if my pilot light is out?
How to Tell If the Pilot Light Is Out Locate the front cover panel on your furnace. It should be a little door that’s easily visible. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color.
What happens when water heater pilot light goes out?
If the pilot light goes out, your water heater won’t be able to ignite the gas burner and therefore, won’t be able to heat the water. But once the pilot light is relit, the water heater is able to ignite the gas burner and can begin to heat the water again.
Should the pilot light always be on in a gas furnace?
If you have an older gas furnace, your heating unit relies on a little blue flame known as a pilot light to ensure ignition of the burners. Since the pilot light needs to remain active, your furnace is always consuming some gas.
Is my pilot light too high?
If the flame is blue and weak, and barely reaches the thermocouple, it needs to be stronger. If it extends well above the thermocouple, it’s too strong. If the flame covers the top of the thermocouple and burns steadily with a yellow tip, that’s just about right.
Can I turn my gas back on myself?
Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.
Can you smell a pilot light?
Note that it is totally normal on automatic pilots (pilots that do NOT stay lit all the time) to smell a little natural gas when the are first turned on. A little gas will escape as the pilot and burners light on your heat or appliance.
Can a pilot light cause a fire?
When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light. If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.
Where is the pilot light in apartment?
Step 1: Locate the Pilot Light In some heaters, it is easy to locate the pilot light, as it is just behind the heater vent. For others, you will have to open the cover of the burner area or remove it altogether, then follow the gas connection from the main gas supply to the pilot light.
Should I turn off pilot light in summer?
As the weather warms up, it is time to put your gas fireplaces and furnaces to rest for the summer. Since it will be several months before you need to fire up the heat again, it is worth considering turning off your system’s pilot light.
