Table of Contents
Chemicals Checklist: Everything You Need to Open Your Pool A good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels. Chlorine granules or tablets. Shock treatment. Increaser/decreaser chemicals for alkalinity, calcium, and pH. Algaecide. Stain treatment.
What chemicals do you need to start up a pool?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
How much shock Do I need to open my pool?
How much shock do I need to shock my pool? A simple ratio and a standard rule of thumb to follow when you shock your pool is to dissolve one pound of either calcium hypochlorite or sodium dichlor for every 10,000 gallons of pool water.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
Do I need to shock my pool when I open it?
KNOW WHEN IT’S TIME TO SHOCK: Shock your pool when you open it for the season to kill algae that has developed in the Spring. AFTER A PARTY OR HEAVY USE: People carry bacteria and chlorine levels can drop drastically when there are many active swimmers using a pool.
Can I use bleach to shock my pool?
To shock a pool with bleach or Clorox, you will need to use ¼ gallon of bleach per 5000 gallons of water to raise the level of chlorine to 5 ppm. However, if you want to bleach 1000 gallons of pool water, you’ll need (1000*½)/10000 which is equal to 0.05 gallons of bleach.
Can you use sodium hypochlorite to shock a pool?
Sodium hypochlorite, also known as bleach or liquid shock, is a “heavy-duty” type of pool shock that isn’t typically used in home pools. Sodium hypochlorite is quick-dissolving and, unlike cal-hypo, does not need to be pre-dissolved before putting it in your pool.
What happens if you get in a pool that was just shocked?
What can happen if you go into a pool too soon after it’s been shocked? There are a few potential issues. “Chlorine will react with water to produce an acid,” Alan says. “The effects will be different depending on whether chlorine is inhaled or whether there is skin or eye contact.”May 25, 2021.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
What does muriatic acid do to a pool?
High pH levels are known to lead to the development of scale. Along with balancing the pH levels of your pool water, muriatic acid is strong enough to kill mold, remove rust stains, get rid of calcium deposits, and clean the surfaces of your pool.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
Is pool shock the same as chlorine?
1) What is the difference between chlorine and shock? Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
What do you use to shock a pool?
Calcium Hypochlorite: Also referred to as cal hypo, this chemical is one of the least costly and most convenient ways to shock your pool. It’s usually sold in granular form.
Will baking soda make my pool water clear?
Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
Is bleach the same as shock?
The “chlorine” in “chlorine bleach” is actually sodium hypochlorite. Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). At a 12.5% concentrate, liquid pool shock is approximately 2x’s stronger than Clorox bleach.
Which is stronger chlorine or bleach?
Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water.
Which is better sodium hypochlorite or calcium hypochlorite?
When considering the chemical structure of these two compounds, calcium hypochlorite contains two hypochlorite anions associated with one calcium cation whereas sodium hypochlorite contains one hypochlorite anion associated with one sodium cation. Moreover, calcium hypochlorite is more stable than sodium hypochlorite.
Is liquid chlorine better than shock?
Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool. Chlorine is the most cost-effective way to sanitize your pool. It has been the product of choice for almost 100 years.
How do you super chlorinate a pool?
To superchlorinate, add AT LEAST 2.5 ounces (5 tablespoons, 75 grams) of chlorine for every 100 gallons (400 litres) of spa water or part thereof. Adding more is fine and never a bad idea.
