Table of Contents
Chemicals Checklist: Everything You Need to Open Your Pool A good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels. Chlorine granules or tablets. Shock treatment. Increaser/decreaser chemicals for alkalinity, calcium, and pH. Algaecide. Stain treatment.
What chemicals do you put in a pool for the first time?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
What chemicals do I need to put in my pool?
Here’s a quick recap of which pool chemicals you need to run your pool, and how much: Chlorine Tablets. How much: 2 tablets for every 10,000 gallons, per week. Pool Shock. Alkalinity Increaser (sodium bicarbonate) Alkalinity Decreaser (dry acid) Calcium Hardness Increaser (calcium chloride) Cyanuric Acid. Pool Algaecide.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
Do I add chlorine or shock first?
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Is chlorine enough to keep a pool clean?
Swimming pools need chlorine at the right levels to stay clean. The Centers for Disease Control and Prevention (CDC) recommends a free chlorine level of 1-3 ppm for a pool and 2-4 ppm for a hot tub or spa. You should test your pool at least 2-3 times a week to check pH and chlorine levels, and adjust as necessary.
How long after filling pool Can you swim?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
What to do after filling a pool?
What Do You Do After an Above Ground Pool Is Filled With Water? Step 1: Learn about how to prevent drowning and pool chemical injuries. Step 2: Turn on the filter. Step 3: Vacuum and skim off debris. Step 4: Test the water, and then test it again. Step 5: Enjoy your pool, but safely!.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
Can I use bleach to shock my pool?
To shock a pool with bleach or Clorox, you will need to use ¼ gallon of bleach per 5000 gallons of water to raise the level of chlorine to 5 ppm. However, if you want to bleach 1000 gallons of pool water, you’ll need (1000*½)/10000 which is equal to 0.05 gallons of bleach.
Can you swim in pool after you shock it?
After Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!.
How often should I shock my pool?
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
How often should I add chlorine to my pool?
Chlorine has a low pH level, and in order to maintain your pool water’s clarity and balance, shocking weekly will allow you to quickly raise the chlorine level, which will rid the pool of contaminants, without lowering the water’s pH levels.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
How much does it cost for chemicals for a pool?
How Much Do Pool Chemicals Cost? Chemicals Cost Per Year Chlorine $55 – $130 Bromine (alternative to chlorine) $30 – $50 Algaecides $360 – $405 Clarifiers $30.
How do I keep my pool water blue?
Pool Tips: How to Keep Your Pool Blue Year Round Tips to Keep Your Pool Blue All Year. Maintain Proper Chlorine Levels. Keep Water Flowing with a Filtration System. Skim Pool Surface Regularly. Chlorine Shocks and Algaecide.
Is a pool worth the money?
Resale Value A pool can increase not only your social worth but also the value of your home. However, the increase is probably not as much as you think. According to HouseLogic, there’s no real guarantee that you’ll make your money back. In fact, adding a swimming pool may only increase your home’s value by 7%.
