Table of Contents
The Flocculant / Coagulant Chemicals ferric sulfate (Iron Sulfate)- Fe2(SO4)3. ferrous sulfate. ferric chloride. ferric chloride sulfate.
What chemicals use flocculation?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What are some common examples of flocculants?
The aluminum-based flocculants include aluminum sulfate, aluminum chloride, sodium aluminate, aluminum chlorohydrate, and polyaluminum chloride. The iron-based flocculants include ferric chloride, ferric sulfate, ferrous sulfate, and ferric chloride sulfate [15, 69].
Will floc clear a cloudy pool?
Pool floc binds particles (and dead algae) that are making your water cloudy together and sinks to the bottom of your pool so you can easily vacuum out the cloudy mess.
Is flocculant and clarifier the same thing?
The main difference between the flocculant and pool clarifier is where the clumped particles go. You can also leave the pool filter off overnight while the pool floc goes to work, which is one less thing to do. Flocculant also works much faster than the pool clarifier.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
Can too much clarifier make a pool cloudy?
What happens when you add too much clarifier is that all the little particles clump together too much an end up as a colloidal suspension. When that happens, the whole thing turns cloudy. It’ll clear but it will take a while.
Can you add too much flocculant?
Too much floc can detract from the beauty of your pool. Flocculants are substances that help clear the cloudiness and restore the clarity to your swimming pool water. You can use too much floc, however.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Which are the flocculating agents?
Flocculating agents are chemical additives that cause suspended solids to form aggregates called flocs. These agents are used in water treatment, municipal and industrial waste treatment, mineral processing, and papermaking. Flocculating agents are either inorganic salts or water-soluble organic polymers.
What can be used as a flocculant?
The following natural products are used as flocculants: Chitosan. Isinglass. Moringa oleifera seeds (Horseradish Tree) Gelatin. Strychnos potatorum seeds (Nirmali nut tree) Guar gum. Alginates (brown seaweed extracts).
Does flocculant raise pH?
Balance the pH level to about 7.0 Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
What happens if too much coagulant is added?
One widely used class of such additives are termed coagulants and are typically inorganic salts with polyvalent ions. Unfortunately, addition of too much coagulant (overdosing) causes charge reversal resulting in restabilization of the suspended solids with a resultant deterioration in subsequent processing.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
How do I make my pool water crystal clear?
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
What are flocculants and coagulants?
Coagulants achieve flocculation through charge neutralisation whereas flocculants physically bind clay and colloidal particles together. The use of natural and synthetic polymeric flocculants can be used to generate larger, more stable flocs and may reduce treatment times.
What is a natural flocculant?
BEWAT natural products are a very specific range focused on treating wastewater. They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
