Table of Contents
The majority of our customers who receive Xpel Ultimate paint protection film also have a protective coating of Ceramic Pro 9H applied on top of the film for even greater protection.
How can you tell if you have ceramic coating?
If you want to know if a car has a ceramic coating, take the car for a drive. Spray the car with water; as you increase the speed of the vehicle, water beads will gather into streams that will flow from your vehicle. In the absence of ceramic coating, the drops of water will cling to the car’s surface.
How long does Xpel ceramic coating last?
Your application of XPEL FUSION PLUS Ceramic Coating is guaranteed for 4 years from initial installation.
How long does ceramic coating on a car last?
Q: How long does ceramic coating last? With proper care and maintenance, a layer of ceramic coating will keep your car looking new for two to five years. Some professional ceramic coatings can last the lifetime of the car.
Can I ceramic coat Xpel?
Can I apply a ceramic coating on top of the film and how does it affect the self-healing feature of XPEL? Yes, Coatings can be applied to the films. We recommend XPEL FUSION PLUS Ceramic Coating. Our ceramic was specifically formulated for your vehicles paint and XPEL Paint protection film.
How much is Xpel ceramic coating?
Pricing starts between $1900* and $2200* and this takes between 12-16 hours**. Impact : Everything mentioned in the full package, and we also do the a-pillars, partial roof, lower rockers, rear impact area and quarter panels. Pricing starts between $2500* and $2800* and this takes between 20 – 30 hours**.
What do car dealers use for paint protection?
What is a Dealership Paint Protection Package? Typically, a paint protection package from a dealer is nothing more than a glorified wax job. They just apply a paint sealant and call it a day.
Do PPF bubbles go away?
Air bubbles will evaporate over several days (or weeks, depending on weather) when the film is exposed to heat. If air bubbles are still on the film, the only way to remove it is to suck the air out with a needle. Expect these things to happen right after a PPF installation.
How often should you ceramic coat your car?
Finally, you’re probably asking yourself “How often should I maintain my ceramic coating?” The answer is a bit more complicated to answer in simplicity since each vehicle is different than the next. In most cases, we recommend revitalizing your coating in some shape or foam every 2-3 months for optimal results.
Is it worth getting a car ceramic coated?
The short answer is yes. As we have seen in this article, ceramic coating has great benefits that will add value to your car in the long run. It will make your job of cleaning and maintaining it less tedious. So that you spend more time driving and enjoying your car than thinking about ways to keep it protected.
How often do you need to apply ceramic coating?
So when you spray them on to a ceramic coated surface, they fill in any minor imperfections from abrasion to restore gloss and bring the surface energy back down so liquids can bead again. Applying every 3-4 months is usually enough to keep your coating in optimal condition.
How do I get rid of Xpel film?
Removing Paint Protection Film Peel one corner of the film up with your fingernail. Pull the film towards you at a shallow angle less than 45 degrees (see figure 8a). This angle is important to ensure sure that the adhesive comes off with the film rather than staying on the paint. The film should “stretch” off the car.
Is Xpel PPF hydrophobic?
Offers hydrophobic and self-cleaning properties on glass surfaces.
Can you ceramic coat PPF?
However, if you’re looking for the ultimate layer of protection, consider applying a DIY-Ceramic Coating as a top coat of a PPF. Ceramic coatings will stick to a PPF. When you go with this extra effort, you’ll be able to improve a few of the drawbacks of PPF-only protection.
Can you use a clay bar on PPF?
Can I use detailing clay on the film? Yes, detailing clay is similar to the regular paint. You need to wet the surface with a lubricant. Here you can use soapy water as lubricant and then rub the surface with a clay bar.
Can you machine polish PPF?
Gyeon Q²M PPF Renew is suitable for use on all glossy paint protection films and can be applied equally well by hand or dual action machine. By hand, it should be applied using a SCHOLL Concepts Polishing Puck.
Does Xpel hide scratches?
XPEL ULTIMATE Protection Film: Care Instructions To keep your film looking great, follow a few simple guidelines: Wait 48 hours after installation to wash your car. Light scratches in the film will self-heal in 30-60 minutes at room temperature.
How much does ceramic coating cost?
A professional grade ceramic coating install tends to run around $600-$2,500 on average, whereas a DIY nano ceramic coating only costs about $375-$600 depending upon the size of the vehicle.
Can I use Xpel ceramic boost on a car without ceramic coating?
Spray on towel wipe on paint. Buff with new clean towel. You will feel resistance at first with the second towel, but it will get incredibly smooth in a matter of seconds. 100% recommend this to anyone with or without a true ceramic coating.
Can you DIY ceramic coating?
Yes, you have read it right! You can apply Nano Ceramic Coating to your car in your home using the DIY technique. However, in order to do this job yourself, you should be well aware of all the techniques or skills that are required for this procedure.
